LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
MICROCHIP MCP14A0154-E/SN product image
  • MCP14A0154-E/SN thumbnail 1
  • MCP14A0154-E/SN thumbnail 2
  • MCP14A0154-E/SN thumbnail 3
  • Pinbelegung
  • Footprint
Abbildung ähnlich

MICROCHIP MCP14A0154-E/SN

Hersteller
MICROCHIP
Herst.-Teilenr.
MCP14A0154-E/SN
LCSC-Nr.
C635848
Verp.
SOIC-8
Kundennummer
Hauptmerkm.
4.5V~18V 1.5A 1.5A SOIC-8 Gate Drivers RoHS
DatenblattMICROCHIP MCP14A0154-E/SN
RoHS-Konformität2 Dokumente verfügbar
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 0.7003$ 0.70
10+$ 0.5708$ 5.71
30+$ 0.5044$ 15.13
100+$ 0.4396$ 43.96
500+$ 0.4011$ 200.55
1,000+$ 0.381$ 381.00
Standardgehäuse100/Full Tube
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers
HerstellerMICROCHIP
Verp.SOIC-8
Input Logic Level - Low-
Low Level Delay Time-
High Level Delay Time-
Quiescent Current-
Input Logic Level - High-
Voltage - Supply4.5V~18V
Operating Temperature-40℃~+150℃
Driven Configuration-
Current - Output Low(IOL)1.5A
Rise Time11.5ns
Fall Time10ns
FeaturesEnable shutdown;Interleaved conduction protection
Current - Output High(IOH)1.5A
Load TypeMOSFET
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Beschreibung

KI-Übersetzung

The MCP14A0153/4/5 devices are high-speed dual MOSFET drivers that are capable of providing up to 1.5A of peak current while operating from a single 4.5V to 18V supply. There are three output configurations available: dual inverting (MCP14A0153), dual non-inverting (MCP14A0154) and complementary (MCP14A0155). These devices feature low shoot-through current, matched rise and fall times and short propagation delays, which make them ideal for high switching frequency applications. The MCP14A0153/4/5 family of devices offers enhanced control with enable functionality. The active-high enable pins can be driven low to drive the corresponding outputs of the MCP14A0153/4/5 low, regardless of the status of the input pin. An integrated pull-up resistor allows the user to leave the enable pins floating for standard operation. These devices are highly latch-up resistant under any condition within their power and voltage ratings. They can accept up to 500 mA of reverse current being forced back into their outputs without damage or logic upset. All terminals are fully protected against Electrostatic Discharge (ESD), up to 2 kV (HBM) and 200 V (MM).

Merkmale

KI-Übersetzung
  • High Peak Output Current: 1.5A (typical)
  • Wide Input Supply Voltage Operating Range: - 4.5V to 18V
  • Low Shoot-Through/Cross-Conduction Current in Output Stage
  • High Capacitive Load Drive Capability: - 1000 pF in 11.5 ns (typical)
  • Short Delay Times: 25 ns (tD1), 24 ns (tD2) (typical)
  • Low Supply Current: 750 μA (typical)
  • Low-Voltage Threshold Input and Enable with Hysteresis
  • Latch-up Protected: Withstands 500 mA Reverse Current
  • Space-Saving Packages: - 8-Lead MSOP - 8-Lead SOIC - 8-Lead 2x3 TDFN

Anwendungen

KI-Übersetzung
  • Switch-Mode Power Supplies (SMPS)
  • Pulse Transformer Drive
  • Line Drivers
  • Level Translator
  • Motor and Solenoid Drive