Zdjęcia poglądowe
Modele EDAEasyEDA
MICROCHIP PIC24FJ256GA110-E/PT
| Producent | |
| Nr części prod. | PIC24FJ256GA110-E/PT |
| Nr LCSC | C635635 |
| Opak. | TQFP-100(12x12) |
| Numer Klienta | |
| Klucz. cechy | PIC 16 Bit 32MHz TQFP-100(12x12) Microcontrollers RoHS |
| Karta Katalogowa | MICROCHIP PIC24FJ256GA110-E/PT |
| Zgodność z RoHS | 2 dokumentów dostępnych |
| Części alternatywne | 10 |
Specyfikacje Produktu
Wszystko
| Typ | Opis | |
|---|---|---|
| Kategoria | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Producent | MICROCHIP | |
| Opak. | TQFP-100(12x12) | |
| ADC (Bit) | 10bit | |
| Number of I/O | 85 | |
| Operating Temperature | -40℃~+125℃ | |
| Voltage - Supply | 2V~3.6V | |
| Program Memory Type | FLASH | |
| EEPROM | - | |
| Program Storage Size | 256KB | |
| CPU Core | PIC | |
| Core Size | 16 Bit | |
| CPU Maximum Speed | 32MHz | |
| Oscillator Type | Built-in |
| Typ | Opis | |
|---|---|---|
| Kategoria | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Producent | MICROCHIP | |
| Opak. | TQFP-100(12x12) | |
| ADC (Bit) | 10bit | |
| Number of I/O | 85 | |
| Operating Temperature | -40℃~+125℃ | |
| Voltage - Supply | 2V~3.6V |
| Typ | Opis | |
|---|---|---|
| Program Memory Type | FLASH | |
| EEPROM | - | |
| Program Storage Size | 256KB | |
| CPU Core | PIC | |
| Core Size | 16 Bit | |
| CPU Maximum Speed | 32MHz | |
| Oscillator Type | Built-in |
Pomoc i opiniePokaż podobne produkty (0) >
Funkcje
Tłumaczenie AI
- On-Chip 2.5V Voltage Regulator
- Switch between Clock Sources in Real Time
- Idle, Sleep and Doze modes with Fast Wake-up and Two-Speed Start-up
- Run mode: 1 mA/MIPS, 2.0V Typical
- Standby Current with 32 kHz Oscillator: 2.6 μA, 2.0V Typical
- Modified Harvard Architecture
- Up to 16 MIPS Operation at 32 MHz
- 8 MHz Internal Oscillator
- 17-Bit x 17-Bit Single-Cycle Hardware Multiplier
- 32-Bit by 16-Bit Hardware Divider
- 16 x 16-Bit Working Register Array
- C Compiler Optimized Instruction Set Architecture with Flexible Addressing modes
- Linear Program Memory Addressing, Up to 12 Mbytes
- Linear Data Memory Addressing, Up to 64 Kbytes
- Two Address Generation Units (AGUs) for Separate Read and Write Addressing of Data Memory
- 10-Bit, Up to 16-Channel Analog-to-Digital (A/D) Converter at 500 ksps: Conversions available in Sleep mode
- Three Analog Comparators with Programmable Input/ Output Configuration
- Charge Time Measurement Unit (CTMU)
- Peripheral Pin Select: Allows independent I/O mapping of many peripherals at run time; Continuous hardware integrity checking and safety interlocks prevent unintentional configuration changes; Up to 46 available pins (100-pin devices)
- Three 3-Wire/4-Wire SPI modules (support 4 Frame modes) with 8-Level FIFO Buffer
- Three I²C modules support Multi-Master/Slave modes and 7-Bit/10-Bit Addressing
- Four UART modules: Supports RS-485, RS-232, LIN/J2602 protocols and IrDA; On-chip hardware encoder/decoder for IrDA; Auto-wake-up and Auto-Baud Detect (ABD); 4-level deep FIFO buffer
- Five 16-Bit Timers/Counters with Programmable Prescaler
- Nine 16-Bit Capture Inputs, each with a Dedicated Time Base
- Nine 16-Bit Compare/PWM Outputs, each with a Dedicated Time Base
- 8-Bit Parallel Master Port (PMP/PSP): Up to 16 address pins; Programmable polarity on control lines
- Hardware Real-Time Clock/Calendar (RTCC): Provides clock, calendar and alarm functions
- Programmable Cyclic Redundancy Check (CRC) Generator
- Up to Five External Interrupt Sources
- Operating Voltage Range of 2.0V to 3.6V
- Self-Reprogrammable under Software Control
- 5.5V Tolerant Input (digital pins only)
- Configurable Open-Drain Outputs on Digital I/Os
- High-Current Sink/Source (18 mA/18 mA) on all I/Os
- Selectable Power Management modes: Sleep, Idle and Doze modes with fast wake-up
- Fail-Safe Clock Monitor Operation: Detects clock failure and switches to on-chip FRC oscillator
- On-Chip LDO Regulator
- Power-on Reset (POR), Power-up Timer (PWRT), Low-Voltage Detect (LVD) and Oscillator Start-up Timer (OST)
- Flexible Watchdog Timer (WDT) with On-Chip Low-Power RC Oscillator for Reliable Operation
- In-Circuit Serial Programming (ICSP) and In-Circuit Debug (ICD) via Two Pins
- JTAG Boundary Scan Support
- Brown-out Reset (BOR)
- Flash Program Memory: 10,000 erase/write cycle endurance (minimum); 20-year data retention minimum; Selectable write protection boundary; Write protection option for Flash Configuration Words
Brak w magazynie
Powiadom mnie
Minimum: 1Wielokrotność: 1Jednostka sprzedaży: Piece
Dodaj do Listy BOM
| Szt. | Cena jedn.(Tylko do wglądu) | Suma całkowita |
|---|---|---|
| 1+ | $ 8.165 | $ 8.17 |
| 200+ | $ 3.1595 | $ 631.90 |
| 500+ | $ 3.0484 | $ 1524.20 |
| 1,000+ | $ 2.9944 | $ 2994.40 |
Standardowa Obudowa119/Full Tray | ||
Lepsza cena za większą ilość?
$
Specyfikacje Produktu
Wszystko
| Typ | Opis | |
|---|---|---|
| Kategoria | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Producent | MICROCHIP | |
| Opak. | TQFP-100(12x12) | |
| ADC (Bit) | 10bit | |
| Number of I/O | 85 | |
| Operating Temperature | -40℃~+125℃ | |
| Voltage - Supply | 2V~3.6V | |
| Program Memory Type | FLASH | |
| EEPROM | - | |
| Program Storage Size | 256KB | |
| CPU Core | PIC | |
| Core Size | 16 Bit | |
| CPU Maximum Speed | 32MHz | |
| Oscillator Type | Built-in |
| Typ | Opis | |
|---|---|---|
| Kategoria | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Producent | MICROCHIP | |
| Opak. | TQFP-100(12x12) | |
| ADC (Bit) | 10bit | |
| Number of I/O | 85 | |
| Operating Temperature | -40℃~+125℃ | |
| Voltage - Supply | 2V~3.6V |
| Typ | Opis | |
|---|---|---|
| Program Memory Type | FLASH | |
| EEPROM | - | |
| Program Storage Size | 256KB | |
| CPU Core | PIC | |
| Core Size | 16 Bit | |
| CPU Maximum Speed | 32MHz | |
| Oscillator Type | Built-in |
Pomoc i opiniePokaż podobne produkty (0) >
Funkcje
Tłumaczenie AI
- On-Chip 2.5V Voltage Regulator
- Switch between Clock Sources in Real Time
- Idle, Sleep and Doze modes with Fast Wake-up and Two-Speed Start-up
- Run mode: 1 mA/MIPS, 2.0V Typical
- Standby Current with 32 kHz Oscillator: 2.6 μA, 2.0V Typical
- Modified Harvard Architecture
- Up to 16 MIPS Operation at 32 MHz
- 8 MHz Internal Oscillator
- 17-Bit x 17-Bit Single-Cycle Hardware Multiplier
- 32-Bit by 16-Bit Hardware Divider
- 16 x 16-Bit Working Register Array
- C Compiler Optimized Instruction Set Architecture with Flexible Addressing modes
- Linear Program Memory Addressing, Up to 12 Mbytes
- Linear Data Memory Addressing, Up to 64 Kbytes
- Two Address Generation Units (AGUs) for Separate Read and Write Addressing of Data Memory
- 10-Bit, Up to 16-Channel Analog-to-Digital (A/D) Converter at 500 ksps: Conversions available in Sleep mode
- Three Analog Comparators with Programmable Input/ Output Configuration
- Charge Time Measurement Unit (CTMU)
- Peripheral Pin Select: Allows independent I/O mapping of many peripherals at run time; Continuous hardware integrity checking and safety interlocks prevent unintentional configuration changes; Up to 46 available pins (100-pin devices)
- Three 3-Wire/4-Wire SPI modules (support 4 Frame modes) with 8-Level FIFO Buffer
- Three I²C modules support Multi-Master/Slave modes and 7-Bit/10-Bit Addressing
- Four UART modules: Supports RS-485, RS-232, LIN/J2602 protocols and IrDA; On-chip hardware encoder/decoder for IrDA; Auto-wake-up and Auto-Baud Detect (ABD); 4-level deep FIFO buffer
- Five 16-Bit Timers/Counters with Programmable Prescaler
- Nine 16-Bit Capture Inputs, each with a Dedicated Time Base
- Nine 16-Bit Compare/PWM Outputs, each with a Dedicated Time Base
- 8-Bit Parallel Master Port (PMP/PSP): Up to 16 address pins; Programmable polarity on control lines
- Hardware Real-Time Clock/Calendar (RTCC): Provides clock, calendar and alarm functions
- Programmable Cyclic Redundancy Check (CRC) Generator
- Up to Five External Interrupt Sources
- Operating Voltage Range of 2.0V to 3.6V
- Self-Reprogrammable under Software Control
- 5.5V Tolerant Input (digital pins only)
- Configurable Open-Drain Outputs on Digital I/Os
- High-Current Sink/Source (18 mA/18 mA) on all I/Os
- Selectable Power Management modes: Sleep, Idle and Doze modes with fast wake-up
- Fail-Safe Clock Monitor Operation: Detects clock failure and switches to on-chip FRC oscillator
- On-Chip LDO Regulator
- Power-on Reset (POR), Power-up Timer (PWRT), Low-Voltage Detect (LVD) and Oscillator Start-up Timer (OST)
- Flexible Watchdog Timer (WDT) with On-Chip Low-Power RC Oscillator for Reliable Operation
- In-Circuit Serial Programming (ICSP) and In-Circuit Debug (ICD) via Two Pins
- JTAG Boundary Scan Support
- Brown-out Reset (BOR)
- Flash Program Memory: 10,000 erase/write cycle endurance (minimum); 20-year data retention minimum; Selectable write protection boundary; Write protection option for Flash Configuration Words
Zgodność & Kody Eksportowe
| Typ | Szczegóły |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Typ | Szczegóły |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC |
| Typ | Szczegóły |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |
Części alternatywne
| MPN | Producent | Opakowanie | Dostępność | Cena jednostkowa | ||
|---|---|---|---|---|---|---|
| PIC24FJ256GA110-I/PT | MICROCHIP | TQFP-100(12x12) | 1 | $ 10.8016 | ||
| PIC24FJ256GA410-I/PT | MICROCHIP | TQFP-100(12x12) | 1 | $ 10.1194 | ||
| PIC24FJ256GA110T-I/PT | MICROCHIP | TQFP-100(12x12) | 0 | $ 7.4442 | ||
| PIC24FJ256GA410T-I/PT | MICROCHIP | TQFP-100(12x12) | 0 | $ 6.708 | ||
| PIC24FJ256GA610-E/PT | MICROCHIP | TQFP-100(12x12) | 0 | $ 5.8911 | ||
| PIC24FJ256GB610-E/PT | MICROCHIP | TQFP-100(12x12) | 0 | $ 6.1766 | ||
| PIC24FJ512GB610-E/PT | MICROCHIP | TQFP-100(12x12) | 0 | $ 6.3926 | ||
| PIC24FJ512GA610-E/PT | MICROCHIP | TQFP-100(12x12) | 0 | $ 6.1272 | ||
| PIC24FJ1024GB610-E/PT | MICROCHIP | TQFP-100(12x12) | 0 | $ 6.5916 | ||
| PIC24FJ1024GA610-E/PT | MICROCHIP | TQFP-100(12x12) | 0 | $ 6.3432 |