MICROCHIP PIC24FJ128GB610T-I/BG

Produttore	MICROCHIP
Cod. Prod.	PIC24FJ128GB610T-I/BG
Cod. LCSC	C628662
Imballo	TFBGA-100
Numero Cliente
Attr. chiave	PIC 16 Bit 32MHz TFBGA-100 Microcontrollers RoHS
Scheda Tecnica	MICROCHIP PIC24FJ128GB610T-I/BG
Conformità RoHS	2 documenti disponibili
Parti alternative	15

Specifiche del Prodotto

Tutto

Tipo	Descrizione
Categoria	Integrated Circuits (ICs)/Embedded/Microcontrollers
Produttore	MICROCHIP
Imballo	TFBGA-100
ADC (Bit)	10bit;12bit
Number of I/O	85
Operating Temperature	-40℃~+85℃
Voltage - Supply	2V~3.6V
Program Memory Type	FLASH
EEPROM	-
Program Storage Size	128KB
CPU Core	PIC
Core Size	16 Bit
CPU Maximum Speed	32MHz
Oscillator Type	Built-in

Tipo	Descrizione
Categoria	Integrated Circuits (ICs)/Embedded/Microcontrollers
Produttore	MICROCHIP
Imballo	TFBGA-100
ADC (Bit)	10bit;12bit
Number of I/O	85
Operating Temperature	-40℃~+85℃
Voltage - Supply	2V~3.6V

Aiuto & FeedbackMostra prodotti simili (0) >

Caratteristiche

Traduzione AI

High-Performance CPU:
- Modified Harvard Architecture
- Largest Program Memory Available for PIC24 (1024 Kbytes) for the Most Complex Applications
- 32 Kbytes SRAM for All Part Variants
- Up to 16 MIPS Operation @ 32 MHz
- 8 MHz Fast RC Internal Oscillator:
  - 96 MHz PLL option
  - Multiple clock divide options
  - Run-time self-calibration capability for maintaining better than ±0.20% accuracy
  - Fast start-up
- 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier
- 32-Bit by 16-Bit Hardware Divider
- 16-Bit x 16-Bit Working Register Array
- C Compiler Optimized Instruction Set Architecture
- Two Address Generation Units for Separate Read and Write Addressing of Data Memory
Universal Serial Bus Features:
- USB v2.0 On-The-Go (OTG) Compliant
- Dual Role Capable - Can Act as Either Host or Peripheral
- Low-Speed (1.5 Mb/s) and Full-Speed (12 Mb/s) USB Operation in Host mode
- Full-Speed USB Operation in Device mode
- High-Precision PLL for USB
- USB Device mode Operation from FRC Oscillator - No Crystal Oscillator Required
- Supports up to 32 Endpoints (16 bidirectional):
  - USB module can use any RAM location on the device as USB endpoint buffers
- On-Chip USB Transceiver with Interface for Off-Chip USB Transceiver
- Supports Control, Interrupt, Isochronous and Bulk Transfers
- On-Chip Pull-up and Pull-down Resistors
Analog Features:
- 10/12-Bit, up to 24-Channel Analog-to-Digital (A/D) Converter:
  - 12-bit conversion rate of 200 ksps
  - Auto-scan and threshold compare features
  - Conversion available during Sleep
- Three Rail-to-Rail, Enhanced Analog Comparators with Programmable Input/Output Configuration
- Charge Time Measurement Unit (CTMU):
  - Used for capacitive touch sensing, up to 24 channels
  - Time measurement down to 100 ps resolution
Low-Power Features:
- Sleep and idle modes Selectively Shut Down Peripherals and/or Core for Substantial Power Reduction and Fast Wake-up
- Doze mode Allows CPU to Run at a Lower Clock Speed than Peripherals
- Alternate Clock modes Allow On-the-Fly Switching to a Lower Clock Speed for Selective Power Reduction
- Wide Range Digitally Controlled Oscillator (DCO) for Fast Start-up and Low-Power Operation
Special Microcontroller Features:
- Large, Dual Partition Flash Program Array:
  - Capable of holding two independent software applications, including bootloader
  - Permits simultaneous programming of one partition while executing application code from the other
  - Allows run-time switching between Active Partitions
- 10,000 Erase/Write Cycle Endurance, Typical
- Data Retention: 20 Years Minimum
- Self-Programmable under Software Control
- Supply Voltage Range of 2.0V to 3.6V
- Operating Ambient Temperature from -40°C to +85°C for Industrial and from -40°C to +125°C for Extended Temperature Range Devices
- On-Chip Voltage Regulators (1.8V) for Low-Power Operation
- Programmable Reference Clock Output
- In-Circuit Serial Programming (ICSP) and In-Circuit Emulation (ICE) via Two Pins
- JTAG Boundary Scan Support
- Fail-Safe Clock Monitor Operation:
  - Detects clock failure and switches to on-chip, low-power RC Oscillator
- Power-on Reset (POR), Brown-out Reset (BOR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Programmable High/Low-Voltage Detect (H/LVD)
- Flexible Watchdog Timer (WDT) with its Own RC Oscillator for Reliable Operation
Peripheral Features:
- Peripheral Pin Select (PPS) - Allows Independent I/O Mapping of Many Peripherals
- Up to Five External Interrupt Sources
- Configurable Interrupt-on-Change on All I/O Pins:
  - Each pin is independently configurable for rising edge or falling edge change detection
- Eight-Channel DMA Supports All Peripheral modules:
  - Minimizes CPU overhead and increases data throughput
- Five 16-Bit Timers/Counters with Prescalers:
  - Can be paired as 32-bit timers/counters
- Six Input Capture modules, Each with a Dedicated 16-Bit Timer
- Six Output Compare/PWM modules, Each with a Dedicated 16-Bit Timer
- Four Single Output CCPs (SCCPs) and Three Multiple Output CCPs (MCCPs):
  - Independent 16/32-bit time base for each module
  - Internal time base and period registers
  - Legacy PIC24F Capture and Compare modes (16 and 32-bit)
  - Special Variable Frequency Pulse and Brushless DC Motor Output modes
- Enhanced Parallel Master/Slave Port (EPMP/EPSP)
- Hardware Real-Time Clock/Calendar (RTCC) with Timestamping
- Three 3-Wire/4-Wire SPI modules:
  - Support four Frame modes
  - Eight-level FIFO buffer
  - Support I2S operation
- Three I2C modules Support Multi-Master/Slave mode and 7-Bit/10-Bit Addressing
- Six UART modules:
  - Support RS-485, RS-232 and LIN/J2602
  - On-chip hardware encoder/decoder for IrDA
  - Auto-wake-up on Auto-Baud Detect (ABD)
  - Four-level deep FIFO buffer
- Programmable 32-Bit Cyclic Redundancy Check (CRC) Generator
- Four Configurable Logic Cells (CLCs):
  - Two inputs and one output, all mappable to peripherals or I/O pins
  - AND/OR/XOR logic and D/JK flip-flop functions
- High-Current Sink/Source (18 mA/18 mA) on All I/O Pins
- Configurable Open-Drain Outputs on Digital I/O Pins
- 5.5V Tolerant Inputs on Multiple I/O Pins

Esaurito

Avvisami

Minimo: 1Multiplo: 1Unità di vendita: Piece

Aggiungi alla Lista BOM

Qtà	Pr. unit.(Solo per riferimento)	Importo totale
1+	$ 5.4192	$ 5.42
200+	$ 2.0976	$ 419.52
500+	$ 2.0235	$ 1011.75
1,000+	$ 1.988	$ 1988.00
Package Standard2200/Full Reel

Prezzo migliore per quantità maggiore?

Specifiche del Prodotto

Tutto

Tipo	Descrizione
Categoria	Integrated Circuits (ICs)/Embedded/Microcontrollers
Produttore	MICROCHIP
Imballo	TFBGA-100
ADC (Bit)	10bit;12bit
Number of I/O	85
Operating Temperature	-40℃~+85℃
Voltage - Supply	2V~3.6V
Program Memory Type	FLASH
EEPROM	-
Program Storage Size	128KB
CPU Core	PIC
Core Size	16 Bit
CPU Maximum Speed	32MHz
Oscillator Type	Built-in

Tipo	Descrizione
Categoria	Integrated Circuits (ICs)/Embedded/Microcontrollers
Produttore	MICROCHIP
Imballo	TFBGA-100
ADC (Bit)	10bit;12bit
Number of I/O	85
Operating Temperature	-40℃~+85℃
Voltage - Supply	2V~3.6V

Aiuto & FeedbackMostra prodotti simili (0) >

Caratteristiche

Traduzione AI

High-Performance CPU:
- Modified Harvard Architecture
- Largest Program Memory Available for PIC24 (1024 Kbytes) for the Most Complex Applications
- 32 Kbytes SRAM for All Part Variants
- Up to 16 MIPS Operation @ 32 MHz
- 8 MHz Fast RC Internal Oscillator:
  - 96 MHz PLL option
  - Multiple clock divide options
  - Run-time self-calibration capability for maintaining better than ±0.20% accuracy
  - Fast start-up
- 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier
- 32-Bit by 16-Bit Hardware Divider
- 16-Bit x 16-Bit Working Register Array
- C Compiler Optimized Instruction Set Architecture
- Two Address Generation Units for Separate Read and Write Addressing of Data Memory
Universal Serial Bus Features:
- USB v2.0 On-The-Go (OTG) Compliant
- Dual Role Capable - Can Act as Either Host or Peripheral
- Low-Speed (1.5 Mb/s) and Full-Speed (12 Mb/s) USB Operation in Host mode
- Full-Speed USB Operation in Device mode
- High-Precision PLL for USB
- USB Device mode Operation from FRC Oscillator - No Crystal Oscillator Required
- Supports up to 32 Endpoints (16 bidirectional):
  - USB module can use any RAM location on the device as USB endpoint buffers
- On-Chip USB Transceiver with Interface for Off-Chip USB Transceiver
- Supports Control, Interrupt, Isochronous and Bulk Transfers
- On-Chip Pull-up and Pull-down Resistors
Analog Features:
- 10/12-Bit, up to 24-Channel Analog-to-Digital (A/D) Converter:
  - 12-bit conversion rate of 200 ksps
  - Auto-scan and threshold compare features
  - Conversion available during Sleep
- Three Rail-to-Rail, Enhanced Analog Comparators with Programmable Input/Output Configuration
- Charge Time Measurement Unit (CTMU):
  - Used for capacitive touch sensing, up to 24 channels
  - Time measurement down to 100 ps resolution
Low-Power Features:
- Sleep and idle modes Selectively Shut Down Peripherals and/or Core for Substantial Power Reduction and Fast Wake-up
- Doze mode Allows CPU to Run at a Lower Clock Speed than Peripherals
- Alternate Clock modes Allow On-the-Fly Switching to a Lower Clock Speed for Selective Power Reduction
- Wide Range Digitally Controlled Oscillator (DCO) for Fast Start-up and Low-Power Operation
Special Microcontroller Features:
- Large, Dual Partition Flash Program Array:
  - Capable of holding two independent software applications, including bootloader
  - Permits simultaneous programming of one partition while executing application code from the other
  - Allows run-time switching between Active Partitions
- 10,000 Erase/Write Cycle Endurance, Typical
- Data Retention: 20 Years Minimum
- Self-Programmable under Software Control
- Supply Voltage Range of 2.0V to 3.6V
- Operating Ambient Temperature from -40°C to +85°C for Industrial and from -40°C to +125°C for Extended Temperature Range Devices
- On-Chip Voltage Regulators (1.8V) for Low-Power Operation
- Programmable Reference Clock Output
- In-Circuit Serial Programming (ICSP) and In-Circuit Emulation (ICE) via Two Pins
- JTAG Boundary Scan Support
- Fail-Safe Clock Monitor Operation:
  - Detects clock failure and switches to on-chip, low-power RC Oscillator
- Power-on Reset (POR), Brown-out Reset (BOR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Programmable High/Low-Voltage Detect (H/LVD)
- Flexible Watchdog Timer (WDT) with its Own RC Oscillator for Reliable Operation
Peripheral Features:
- Peripheral Pin Select (PPS) - Allows Independent I/O Mapping of Many Peripherals
- Up to Five External Interrupt Sources
- Configurable Interrupt-on-Change on All I/O Pins:
  - Each pin is independently configurable for rising edge or falling edge change detection
- Eight-Channel DMA Supports All Peripheral modules:
  - Minimizes CPU overhead and increases data throughput
- Five 16-Bit Timers/Counters with Prescalers:
  - Can be paired as 32-bit timers/counters
- Six Input Capture modules, Each with a Dedicated 16-Bit Timer
- Six Output Compare/PWM modules, Each with a Dedicated 16-Bit Timer
- Four Single Output CCPs (SCCPs) and Three Multiple Output CCPs (MCCPs):
  - Independent 16/32-bit time base for each module
  - Internal time base and period registers
  - Legacy PIC24F Capture and Compare modes (16 and 32-bit)
  - Special Variable Frequency Pulse and Brushless DC Motor Output modes
- Enhanced Parallel Master/Slave Port (EPMP/EPSP)
- Hardware Real-Time Clock/Calendar (RTCC) with Timestamping
- Three 3-Wire/4-Wire SPI modules:
  - Support four Frame modes
  - Eight-level FIFO buffer
  - Support I2S operation
- Three I2C modules Support Multi-Master/Slave mode and 7-Bit/10-Bit Addressing
- Six UART modules:
  - Support RS-485, RS-232 and LIN/J2602
  - On-chip hardware encoder/decoder for IrDA
  - Auto-wake-up on Auto-Baud Detect (ABD)
  - Four-level deep FIFO buffer
- Programmable 32-Bit Cyclic Redundancy Check (CRC) Generator
- Four Configurable Logic Cells (CLCs):
  - Two inputs and one output, all mappable to peripherals or I/O pins
  - AND/OR/XOR logic and D/JK flip-flop functions
- High-Current Sink/Source (18 mA/18 mA) on All I/O Pins
- Configurable Open-Drain Outputs on Digital I/O Pins
- 5.5V Tolerant Inputs on Multiple I/O Pins

C628662 Libreria EasyEDA

This image shows the pinout diagram of PIC24FJ128GB610T-I/BG

This image shows the footprint diagram of PIC24FJ128GB610T-I/BG

Conformità & Codici di Esportazione

Tipo	Dettagli
RoHS	ROHS3 Compliant
ECCN	3A991A2
CNHTS	8542319090
USHTS
TARIC
CAHTS
BRHTS
INHTS
MXHTS

Tipo	Dettagli
RoHS	ROHS3 Compliant
ECCN	3A991A2
CNHTS	8542319090
USHTS
TARIC

Tipo	Dettagli
CAHTS
BRHTS
INHTS
MXHTS

Parti alternative

MPN	Produttore	Imballaggio	Prezzo unitario
PIC24FJ128GA610T-I/BG	MICROCHIP	TFBGA-100	$ 5.1784
PIC24FJ128GA610-I/BG	MICROCHIP	TFBGA-100	$ 5.1537
PIC24FJ128GB610-I/BG	MICROCHIP	TFBGA-100	$ 5.3945
PIC24FJ256GA610T-I/BG	MICROCHIP	TFBGA-100	$ 5.325
PIC24FJ256GB610T-I/BG	MICROCHIP	TFBGA-100	$ 5.5519
PIC24FJ256GA610-I/BG	MICROCHIP	TFBGA-100	$ 5.3096
PIC24FJ256GB610-I/BG	MICROCHIP	TFBGA-100	$ 5.5288
PIC24FJ512GA610T-I/BG	MICROCHIP	TFBGA-100	$ 5.5149
PIC24FJ512GB610T-I/BG	MICROCHIP	TFBGA-100	$ 5.7325
PIC24FJ512GA610-I/BG	MICROCHIP	TFBGA-100	$ 5.4825
PIC24FJ512GB610-I/BG	MICROCHIP	TFBGA-100	$ 18.5014
PIC24FJ1024GA610T-I/BG	MICROCHIP	TFBGA-100	$ 5.6862
PIC24FJ1024GB610T-I/BG	MICROCHIP	TFBGA-100	$ 5.9254
PIC24FJ1024GA610-I/BG	MICROCHIP	TFBGA-100	$ 5.6723
PIC24FJ1024GB610-I/BG	MICROCHIP	TFBGA-100	$ 5.9131