LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
POWER INTEGRATIONS TNY286KG-TL product image
  • TNY286KG-TL thumbnail 1
  • TNY286KG-TL thumbnail 2
  • TNY286KG-TL thumbnail 3
  • Pinbelegung
  • Footprint
Abbildung ähnlich

POWER INTEGRATIONS TNY286KG-TL

Hersteller
POWER INTEGRATIONS
Herst.-Teilenr.
TNY286KG-TL
LCSC-Nr.
C568069
Verp.
ESOP-12
Kundennummer
Hauptmerkm.
Energy-Efficient, Off-Line Switcher with Line Compensated Overload Power
DatenblattPOWER INTEGRATIONS TNY286KG-TL
RoHS-Konformität1 Dokumente verfügbar
Vorrätig: 17
17 Ab Lager, sofort versandfertig
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-PreisGesamtbetrag
1+$ 1.5726$ 1.57
10+$ 1.3118$ 13.12
30+$ 1.1686$ 35.06
100+$ 1.006$ 100.60
500+$ 0.9352$ 467.60
1,000+$ 0.903$ 903.00
Standardgehäuse1000/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/AC DC Converters, Offline Switchers
HerstellerPOWER INTEGRATIONS
Verp.ESOP-12
Operating Temperature-40℃~+150℃
Frequency - Switching124kHz~140kHz
Voltage - Breakdown725V
FeaturesOver Voltage Protection;Short Circuit Protection;Overtemperature protection (OTP);Over Current Protection;Under Voltage Protection
TopologyFlyback
Duty Cycle(Max)67%
Feedback SystemSecondary-Side Feedback
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Beschreibung

KI-Übersetzung

TinySwitch-4 combines a high-voltage power MOSFET switch with a power supply controller in one device. Unlike conventional PWM (pulse width modulator) controllers, it uses a simple ON/OFF control to regulate the output voltage.

Merkmale

KI-Übersetzung
  • 725 V rated MOSFET
  • Increases BV de-rating margin
  • Line compensated overload power – no additional components
  • Dramatically reduces max overload variation over universal input voltage range
  • ±5% turn on UV threshold: line voltage sense with single external resistor
  • Simple ON/OFF control, no loop compensation needed
  • Selectable current limit through BP/M capacitor value
  • Higher current limit extends peak power or, in open frame applications, maximum continuous power
  • Lower current limit improves efficiency in enclosed adapters/ chargers
  • Allows optimum TinySwitch-4 choice by swapping devices with no other circuit redesign
  • Tight I2f parameter tolerance reduces system cost
  • Maximizes MOSFET and magnetics utilization
  • ON-time extension – extends low-line regulation range/hold-up time to reduce input bulk capacitance
  • Self-biased: no bias winding or bias components
  • Frequency jittering reduces EMI filter costs
  • Pin-out simplifies heat sinking to the PCB
  • SOURCE pins are electrically quiet for low EMI
  • Accurate hysteretic thermal shutdown protection with automatic recovery eliminates need for manual reset
  • Auto-restart delivers <3% of maximum power in short-circuit and open loop fault conditions
  • Output overvoltage shutdown with optional Zener
  • Fast AC reset with optional UV external resistor
  • Very low component count enhances reliability and enables single-sided printed circuit board layout
  • High bandwidth provides fast turn-on with no overshoot and excellent transient load response
  • Extended creepage between DRAIN and all other pins improves field reliability
  • Easily meets all global energy efficiency regulations
  • No-load <30 mW with bias winding, <150 mW at 265 VAC without bias winding
  • ON/OFF control provides constant efficiency down to very light loads – ideal for mandatory CEC regulations and EuP standby requirements

Anwendungen

KI-Übersetzung
  • PC Standby and other auxiliary supplies
  • DVD/PVR and other low power set top decoders
  • Supplies for appliances, industrial systems, metering, etc
  • Chargers/adapters for cell/cordless phones, PDAs, digital cameras, MP3/portable audio, shavers, etc.