LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
MICROCHIP MCP1812BT-020/7QX product image
Abbildung ähnlich

MICROCHIP MCP1812BT-020/7QX

Hersteller
Herst.-Teilenr.
MCP1812BT-020/7QX
LCSC-Nr.
C3747799
Verp.
UQFN-4(1x1)
Kundennummer
Hauptmerkm.
2V Positive Fixed UQFN-4(1x1) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
DatenblattMICROCHIP MCP1812BT-020/7QX
Alternativteile1
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 0.3978$ 0.40
200+$ 0.154$ 30.80
500+$ 0.1486$ 74.30
1,000+$ 0.1459$ 145.90
Standardgehäuse500/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
HerstellerMICROCHIP
Verp.UQFN-4(1x1)
Output Voltage2V
Number of Outputs1
Operating Temperature-40℃~+85℃@(Tj)
Supply Current (Iq)250nA
Output ConfigurationPositive
Operating Voltage5.5V
Output Current300mA
FeaturesOver Current Protection;Output discharge;Enable control
Output TypeFixed

Beschreibung

KI-Übersetzung

The MCP1811X/12X devices are 150 mA (MCP1811X) and 300 mA (MCP1812X) Low Dropout (LDO) linear regulators that provide high-current and low output voltages while maintaining an ultra-low 250 nA of quiescent current during device operation. In addition, the MCP1811B/12B can be shut down for 5 nA (typical) supply current draw. The MCP1811X/12X family comes in nine standard fixed output voltage versions: 1V, 1.2V, 1.8V, 2.0V, 2.5V, 2.8V, 3.0V, 3.3V and 4.0V. The 150/300 mA output current capability, combined with the low output voltage capability, make the MCP1811X/12X device family a good choice for new ultra-long life LDO applications that have high-current demands, but require ultra-low power consumption during Sleep periods. The MCP1811X/12X devices are stable with ceramic output capacitors that inherently provide lower output noise, and reduce the size and cost of the entire regulator solution. Only 1 μF (2.2 μF for MCP1812X) of output capacitance is needed to assure the stability of the system with a low noise output. The MCP1811X/12X family can be paired with other ultra-low current devices, such as Microchip’s eXtreme Low-Power (XLP) technology devices, for a complete ultra-low power solution.

Merkmale

KI-Übersetzung
  • Ultra-Low Quiescent Current: 250 nA (typical)
  • Ultra-Low Shutdown Supply Current:
    • 10 nA typical for MCP1811A/12A
    • 5 nA typical for MCP1811B/12B
  • Output Current Capability:
    • 150 mA for MCP1811X
    • 300 mA for MCP1812X
  • Input Voltage Range: 1.8V to 5.5V
  • Standard Output Voltages: 1V, 1.2V, 1.8V, 2.0V, 2.5V, 2.8V, 3.0V, 3.3V and 4.0V
  • Stable with Ceramic Output Capacitor: 1.0 μF (MCP1811X) and 2.2 μF (MCP1812X)
  • Overcurrent Protection
  • Output Discharge (Shutdown mode, SHDN = GND) MCP1811A/12A
  • Available for the Following Packages:
    • 3-Lead SOT-23
    • 3-Lead SC70
    • 4-Lead 1 x 1 mm UDFN
    • 5-Lead SOT-23
    • 5-Lead SC70

Anwendungen

KI-Übersetzung
  • Energy Harvesting
  • Long-Life, Battery-Powered Applications
  • Smart Cards
  • Ultra-Low Consumption “Green” Products
  • Wearable Electronics (smart watches, bracelets, headsets)
  • Medical Devices (hearing aids)

Alternativteile

MPNHerstellerVerpackungVerfügbarkeitStückpreis
MCP1812AT-020/7QXMICROCHIPUQFN-4(1x1)0$ 0.3978