MICROCHIP MIC2586R-2YM

The MIC2586 and MIC2586R are single-channel positive voltage hot swap controllers/sequencers designed to provide safe insertion and removal of boards for systems that require live (always-powered) backplanes. These devices use few external components and act as controllers for external N-channel power MOSFET devices to provide inrush current control and output voltage slew rate control. Overcurrent fault protection is provided via programmable analog foldback current-limit circuitry equipped with a programmable overcurrent filter. These protection circuits combine to limit the power dissipation of the external MOSFET to insure that the MOSFET is in its SOA during fault conditions. The MIC2586 provides a circuit breaker function that latches the output MOSFET off if the load current exceeds the current-limit threshold for the duration of the programmable timer. Conversely, the MIC2586R will attempt to restart power after a load current fault with a low duty cycle to prevent the MOSFET from overheating. Each device provides either an active-HIGH (−1BM) or an active-LOW (−2BM) “power-is-good” (PWRGD) signal. The MIC2586 and the MIC2586R provide up to three, time-sequenced PWRGD outputs that can be used as a control for DC/DC converter circuits or power modules.

• Operates from +10V to +80V with 100V ABS MAX operation
• Industrial temperature specifications at VCC = +24V and VCC = +48V
• Programmable current limit with analog foldback
• Active current regulation minimizes inrush current
• Electronic circuit breaker for overcurrent fault protection
• Output latch off (MIC2586) or output auto-retry (MIC2586R)
• Fast responding circuit breaker (<2μs) to short-circuit loads
• Programmable input undervoltage lockout
• Fault Reporting: Three open-drain PWRGD outputs for enabling DC/DC converter(s)
• Active-HIGH: MIC2586-1/MIC2586R-1
• Active-LOW: MIC2586-2/MIC2586R-2

• General-purpose hot board insertion
• High-voltage, high-side electronic circuit breaker
• +12V/+24V/+48V distributed power systems
• +24V/+48V industrial/alarm systems
• Telecom systems
• Medical systems