LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Cirrus Logic WM8805GEDS/RV product image
  • WM8805GEDS/RV thumbnail 1
  • WM8805GEDS/RV thumbnail 2
  • WM8805GEDS/RV thumbnail 3
  • Pinbelegung
  • Footprint
Abbildung ähnlich

Cirrus Logic WM8805GEDS/RV

Hersteller
Herst.-Teilenr.
WM8805GEDS/RV
LCSC-Nr.
C323844
Verp.
SSOP-28-208mil
Kundennummer
Hauptmerkm.
8:1 Digital Interface Transceiver with PLL
DatenblattCirrus Logic WM8805GEDS/RV
RoHS-Konformität1 Dokumente verfügbar
Vorrätig: 2
2 Ab Lager, sofort versandfertig
Eingestellt
Nach Abverkauf wird dieser Artikel als „Nicht verfügbar“ gekennzeichnet.
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Stk.E-PreisGesamtbetrag
1+$ 3.304$ 3.30
10+$ 2.829$ 28.29
30+$ 2.5446$ 76.34
100+$ 2.2587$ 225.87
500+$ 2.1262$ 1063.10
1,000+$ 2.068$ 2068.00
Standardgehäuse2000/Full Reel

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Audio Special Purpose
HerstellerCirrus Logic
Verp.SSOP-28-208mil
Operating Temperature-40℃~+85℃
TypeTransceiver
FeaturesBuilt-in phase-locked loop;Multi-channel audio;Link status monitoring
InterfaceI2S
Resolution (Bits)32kHz~192kHz
Voltage - Supply2.7V~3.6V

Beschreibung

KI-Übersetzung

The WM8805 is a high performance consumer mode S/PDIF transceiver with support for 8 received Channels and 1 transmitted Channel. A crystal derived, or externally provided high quality master clock is used to allow low jitter recovery of S/PDIF supplied master clocks. Generation of all typically used audio clocks is possible using the high performance internal PLL. A dedicated CLKOUT pin provides a high drive clock output. A pass through option is provided which allows the device simply to be used to clean up (de-jitter) the received digital audio signals. The device may be used under software control or stand alone hardware control modes. In software control mode, both 2-wire with read back and 3-wire interface modes are supported. Status and error monitoring is built-in and results can be read back over the control interface, on the GPO pins or streamed over the audio data interface in ‘With Flags’ mode (audio data with status flags appended). The audio data interface supports I²S, left justified, right justified and DSP audio formats of 16 - 24 bit word length, with sample rates from 32 to 192 ks/s. The device is supplied in a 28-lead Pb-free SSOP package.

Merkmale

KI-Übersetzung
  • S/PDIF (IEC60958-3) compliant.
  • Advanced jitter attenuating PLL with low intrinsic period jitter of 50 ps RMS.
  • S/PDIF recovered clock using PLL, or stand alone crystal derived clock generation.
  • Supports 10 – 27MHz crystal clock frequencies.
  • 2-wire / 3-Wire serial or hardware control interface.
  • Programmable Audio data interface modes: I2S, Left, Right Justified or DSP 16/20/24 bit word lengths
  • 8 channel receiver input and 1 channel transmit output.
  • Auto frequency detection / synchronisation.
  • Selectable output status data bits.
  • Up to 8 configurable GPO pins.
  • De-emphasis flag output.
  • Non-audio detection including DOLBY and DTS.
  • Channel status changed flag.
  • Configurable clock distribution with selectable output MCLK rate of 512fs, 256fs, 128fs and 64fs.
  • 2.7 to 3.6V digital and PLL supply voltages.
  • 28-lead SSOP package.

Anwendungen

KI-Übersetzung
  • Surround Sound AV processors and Hi-Fi systems
  • Music industry applications
  • DVD-P/DVD-RW Digital TV