LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
ST STM32L062C8U6 product image
Immagini a scopo illustrativo

ST STM32L062C8U6

Produttore
ST
Cod. Prod.
STM32L062C8U6
Cod. LCSC
C3227329
Imballo
UFQFPN-48(7x7)
Numero Cliente
Attr. chiave
Ultra-low-power Arm Cortex-M0+ MCU with 128-Kbytes of Flash memory, 32 MHz CPU, USB, AES
Scheda TecnicaST STM32L062C8U6
Conformità RoHS3 documenti disponibili
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 3.7973$ 3.80
200+$ 1.4705$ 294.10
500+$ 1.418$ 709.00
1,000+$ 1.3934$ 1393.40
Package Standard1560/Full Tray
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Embedded/Microcontrollers
ProduttoreST
ImballoUFQFPN-48(7x7)
DAC (Bit)12bit
ADC (Bit)12bit
Number of I/O27
Operating Temperature-40℃~+85℃
Program Memory TypeFLASH
Voltage - Supply1.65V~3.6V
EEPROM2KB
Program Storage Size64KB
CPU CoreARM Cortex-M0+
Core Size32 Bit
CPU Maximum Speed32MHz
Oscillator TypeBuilt-in
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

This device is an ultra-low-power microcontroller featuring an Arm® 32-bit Cortex®-M0+ core with MPU, supporting multiple low-power modes, and offering rich memory, analog, and communication peripherals in a variety of package options.

Caratteristiche

Traduzione AI
  • Ultra-low-power platform
  • 1.65 V to 3.6 V power supply
  • -40 to 125 ℃ temperature range
  • 0.27 μA Standby mode (2 wakeup pins)
  • 0.4 μA Stop mode (16 wakeup lines)
  • 0.8 μA Stop mode + RTC + 8-Kbyte RAM retention
  • 88 μA/MHz in Run mode
  • 3.5 μs wakeup time (from RAM)
  • 5 μs wakeup time (from Flash memory)
  • Core: Arm 32-bit Cortex - M0+ with MPU
  • From 32 kHz up to 32 MHz max.
  • 0.95 DMIPS/MHz
  • Memories
  • 64-Kbyte Flash memory with ECC
  • 8-Kbyte RAM
  • 2 Kbytes of data EEPROM with ECC
  • 20-byte backup register
  • Sector protection against R/W operation
  • Up to 29 fast I/Os (25 I/Os 5V tolerant)
  • Reset and supply management
  • Ultra-safe, low-power BOR (brownout reset) with 5 selectable thresholds
  • Ultra-low-power POR/PDR
  • Programmable voltage detector (PVD)
  • Clock sources
  • 32 kHz oscillator for RTC with calibration
  • High speed internal 16 MHz factory-trimmed RC (+/-1%)
  • Internal low-power 37 kHz RC
  • Internal multispeed low-power 65 kHz to 4.2 MHz RC
  • Internal self calibration of 48 MHz RC for USB
  • PLL for CPU clock
  • Pre-programmed bootloader
  • USART, SPI supported
  • Development support
  • Serial wire debug supported
  • Rich Analog peripherals
  • 12-bit ADC 1.14 Msps with 10 channels (down to 1.65 V)
  • 12-bit 1 channel DAC with output buffers (down to 1.8 V)
  • 2x ultra-low-power comparators (window mode and wake up capability, down to 1.65 V)
  • Up to 14 capacitive sensing channels supporting touchkey, linear and rotary touch sensors
  • 7-channel DMA controller, supporting ADC, SPI, I2C, USART, DAC, Timers, AES
  • 8x peripheral communication interfaces
  • 1x USB 2.0 crystal-less, battery charging detection and LPM
  • 2x USART (ISO 7816, IrDA), 1x UART (low power)
  • 3x SPI 16 Mbits/s
  • Up to 2x I2C (SMBus/PMBus)
  • 9x timers: 1x 16-bit with up to 4 channels, 2x 16-bit with up to 2 channels, 1x 16-bit ultra-low-power timer, 1x SysTick, 1x RTC, 1x 16-bit basic for DAC, and 2x watchdogs (independent/window)
  • CRC calculation unit, 96-bit unique ID
  • True RNG and firewall protection
  • Hardware Encryption Engine AES 128-bit
  • All packages are ECOPACK2