- Pinout
- Footprint
Immagini a scopo illustrativo
Modelli EDAEasyEDA
MICROCHIP USB7206C-I/KDX
| Produttore | |
| Cod. Prod. | USB7206C-I/KDX |
| Cod. LCSC | C3210686 |
| Imballo | VQFN-100(12x12) |
| Numero Cliente | |
| Attr. chiave | 6-Port USB 3.2 Gen 2 Controller Hub |
| Scheda Tecnica | MICROCHIP USB7206C-I/KDX |
| Conformità RoHS | 2 documenti disponibili |
| Parti alternative | 1 |
Specifiche del Prodotto
Tutto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Interface/Controllers | |
| Produttore | MICROCHIP | |
| Imballo | VQFN-100(12x12) | |
| Features | BC1.2 protocol support;Programmable signal drive | |
| Operating Temperature | -40℃~+85℃ | |
| Memory Interface | SPI | |
| USB Protocol | USB 3.2;USB 2.0 | |
| Number of Channels | 6 | |
| Data Rate | 10Gbps |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Interface/Controllers | |
| Produttore | MICROCHIP | |
| Imballo | VQFN-100(12x12) | |
| Features | BC1.2 protocol support;Programmable signal drive | |
| Operating Temperature | -40℃~+85℃ |
| Tipo | Descrizione | |
|---|---|---|
| Memory Interface | SPI | |
| USB Protocol | USB 3.2;USB 2.0 | |
| Number of Channels | 6 | |
| Data Rate | 10Gbps |
Aiuto & FeedbackMostra prodotti simili (0) >
Descrizione
Traduzione AI
The Microchip USB7206C hub is a low-power, OEM configurable, USB 3.2 Gen 2 hub controller with 6 downstream ports and advanced features for embedded USB applications. The USB7206C is fully compliant with the Universal Serial Bus Revision 3.2 Specification and USB 2.0 Link Power Management Addendum. The USB7206C supports 10 Gbps SuperSpeed + (SS+), 5 Gbps SuperSpeed (SS), 480 Mbps Hi-Speed (HS), 12 Mbps Full-Speed (FS), and 1.5 Mbps LowSpeed (LS) USB downstream devices on five standard USB 3.2 Gen 2 downstream ports and only legacy speeds (HS/ FS/LS) on one standard USB 2.0 downstream port.
Caratteristiche
Traduzione AI
- 6-Port USB Smart Hub with: Five Standard USB 3.2 Gen 2 downstream ports, One Standard USB 2.0 downstream port, Internal Hub Feature Controller enables: USB to I²C/SPI/I²S/GPIO bridge endpointsupport, USB to internal hub register write and read
- USB Link Power Management (LPM) support
- Programming of firmware image to external SPI memory device from USB host
- USB-IF Battery Charger revision 1.2 support on downstream ports (DCP, CDP, SDP)
- Enhanced OEM configuration options available through either OTP or external SPI memory
- Available in 100-pin (12mm×12mm) VQFN RoHS compliant package
- Commercial and industrial grade temperature support
- USB 3.2 Gen 2 compliant 10 Gbps, 5 Gbps, 480 Mbps, 12 Mbps, and 1.5Mbps operation
- 5V tolerant USB 2.0 pins
- 1.21V tolerant USB 3.2 Gen 2 pins
- Integrated termination and pull-up/down resistors
- Supports battery charging of most popular battery powered devices on all ports
- USB-IF Battery Charging rev. 1.2 support (DCP, CDP, SDP)
- Apple portable product charger emulation
- Chinese YD/T 1591-2006/2009 charger emulation
- European Union universal mobile charger support
- Supports additional portable devices
- On-chip Microcontroller - manages I/Os, VBUS, and other signals
- 96kB RAM, 256kB ROM
- 8kB One-Time-Programmable (OTP) ROM - Includes on-chip charge pump
- Configuration programming via OTP Memory, SPI external memory, or SMBus
- FlexConnect - The roles of the upstream and all downstream ports are reversible on command
- USB Bridging - USB to I²C, SPI, I²S, and GPIO
- PortSwap - Configurable USB 2.0 differential pair signal swap
- PHYBoost - Programmable USB transceiver drive strength for recovering signal integrity
- VariSense - Programmable USB receive sensitivity
- PortSplit - USB 2.0 and USB 3.2 Gen 2 port operation can be split for custom applications using embedded USB 3.x devices in parallel with USB 2.0 devices
- Compatible with Microsoft Windows 10, 8, 7, XP, Apple OS X 10.4+, and Linux hub drivers
- Optimized for low-power operation and low thermal dissipation
- 100-pin VQFN package (12mm×12mm)
Applicazioni
Traduzione AI
- Standalone USB Hubs
- Laptop Docks
- PC Motherboards
- PC Monitor Docks
- Multi-function USB 3.2 Gen 2 Peripherals
Disponibile: 27
27 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
| Qtà | Pr. unit. | Importo totale |
|---|---|---|
| 1+ | $ 15.6558 | $ 15.66 |
Package Standard168/Full Tray | ||
Prezzo migliore per quantità maggiore?
$
Specifiche del Prodotto
Tutto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Interface/Controllers | |
| Produttore | MICROCHIP | |
| Imballo | VQFN-100(12x12) | |
| Features | BC1.2 protocol support;Programmable signal drive | |
| Operating Temperature | -40℃~+85℃ | |
| Memory Interface | SPI | |
| USB Protocol | USB 3.2;USB 2.0 | |
| Number of Channels | 6 | |
| Data Rate | 10Gbps |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Interface/Controllers | |
| Produttore | MICROCHIP | |
| Imballo | VQFN-100(12x12) | |
| Features | BC1.2 protocol support;Programmable signal drive | |
| Operating Temperature | -40℃~+85℃ |
| Tipo | Descrizione | |
|---|---|---|
| Memory Interface | SPI | |
| USB Protocol | USB 3.2;USB 2.0 | |
| Number of Channels | 6 | |
| Data Rate | 10Gbps |
Aiuto & FeedbackMostra prodotti simili (0) >
Descrizione
Traduzione AI
The Microchip USB7206C hub is a low-power, OEM configurable, USB 3.2 Gen 2 hub controller with 6 downstream ports and advanced features for embedded USB applications. The USB7206C is fully compliant with the Universal Serial Bus Revision 3.2 Specification and USB 2.0 Link Power Management Addendum. The USB7206C supports 10 Gbps SuperSpeed + (SS+), 5 Gbps SuperSpeed (SS), 480 Mbps Hi-Speed (HS), 12 Mbps Full-Speed (FS), and 1.5 Mbps LowSpeed (LS) USB downstream devices on five standard USB 3.2 Gen 2 downstream ports and only legacy speeds (HS/ FS/LS) on one standard USB 2.0 downstream port.
Caratteristiche
Traduzione AI
- 6-Port USB Smart Hub with: Five Standard USB 3.2 Gen 2 downstream ports, One Standard USB 2.0 downstream port, Internal Hub Feature Controller enables: USB to I²C/SPI/I²S/GPIO bridge endpointsupport, USB to internal hub register write and read
- USB Link Power Management (LPM) support
- Programming of firmware image to external SPI memory device from USB host
- USB-IF Battery Charger revision 1.2 support on downstream ports (DCP, CDP, SDP)
- Enhanced OEM configuration options available through either OTP or external SPI memory
- Available in 100-pin (12mm×12mm) VQFN RoHS compliant package
- Commercial and industrial grade temperature support
- USB 3.2 Gen 2 compliant 10 Gbps, 5 Gbps, 480 Mbps, 12 Mbps, and 1.5Mbps operation
- 5V tolerant USB 2.0 pins
- 1.21V tolerant USB 3.2 Gen 2 pins
- Integrated termination and pull-up/down resistors
- Supports battery charging of most popular battery powered devices on all ports
- USB-IF Battery Charging rev. 1.2 support (DCP, CDP, SDP)
- Apple portable product charger emulation
- Chinese YD/T 1591-2006/2009 charger emulation
- European Union universal mobile charger support
- Supports additional portable devices
- On-chip Microcontroller - manages I/Os, VBUS, and other signals
- 96kB RAM, 256kB ROM
- 8kB One-Time-Programmable (OTP) ROM - Includes on-chip charge pump
- Configuration programming via OTP Memory, SPI external memory, or SMBus
- FlexConnect - The roles of the upstream and all downstream ports are reversible on command
- USB Bridging - USB to I²C, SPI, I²S, and GPIO
- PortSwap - Configurable USB 2.0 differential pair signal swap
- PHYBoost - Programmable USB transceiver drive strength for recovering signal integrity
- VariSense - Programmable USB receive sensitivity
- PortSplit - USB 2.0 and USB 3.2 Gen 2 port operation can be split for custom applications using embedded USB 3.x devices in parallel with USB 2.0 devices
- Compatible with Microsoft Windows 10, 8, 7, XP, Apple OS X 10.4+, and Linux hub drivers
- Optimized for low-power operation and low thermal dissipation
- 100-pin VQFN package (12mm×12mm)
Applicazioni
Traduzione AI
- Standalone USB Hubs
- Laptop Docks
- PC Motherboards
- PC Monitor Docks
- Multi-function USB 3.2 Gen 2 Peripherals
C3210686 Libreria EasyEDA
Conformità & Codici di Esportazione
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8471800000 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8471800000 |
| USHTS | |
| TARIC |
| Tipo | Dettagli |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |
Parti alternative
| MPN | Produttore | Imballaggio | Disponibilità | Prezzo unitario | ||
|---|---|---|---|---|---|---|
| USB7206CT-I/KDX | MICROCHIP | VQFN-100(12x12) | 0 | $ 14.3922 |