Infineon/CYPRESS CY7C65213A-28PVXIT

USB-UART LP Bridge controller (CY7C65213 and CY7C65213A) is fully compliant with the USB 2.0 specification, USB-IF Test-ID (TID) 40860041. CY7C65213/CY7C65213A is a fully integrated USB-to-UART bridge that provides a simple method to upgrade UART-based devices to USB with a minimal number of components.

• USB 2.0 certified, Full-Speed (12 Mbps)
• Supports communication driver class (CDC), personal health care device class (PHDC), and vendor-device class
• Battery charger detection (BCD) compliant with USB Battery Charging Specification Rev. 1.2 (peripheral detect only)
• Integrated USB termination resistors
• Single-channel configurable UART interfaces
• Supports 2-pin, 4-pin, 6-pin, 8-pin UART interface
• Data rates up to 3 Mbps
• 256 bytes for each transmit and receive buffer
• Data format: 7 or 8 data bits, 1 or 2 stop bits, No parity, even, odd, mark, or space parity
• Supports parity, overrun, and framing errors
• Supports flow control using CTS, RTS, DTR, DSR
• Supports UART break signal
• CY7C65213 supports single channel RS232/RS422 interfaces whereas CY7C65213A supports RS232/RS422/RS485 interfaces
• General-purpose input/output (GPIO): 8 pins
• Supports unique serial number feature for each device, which fixes the COM port number permanently when USB-UART LP Bridge controller device plugs in
• Configuration utility (Windows) to configure the following: Vendor ID (VID), Product ID (PID), and Product and Manufacturer descriptors, UART, Charger detection, GPIO
• Driver support for VCOM and DLL
• Windows 10: 32- and 64-bit versions
• Windows 8.1: 32- and 64-bit versions
• Windows 8: 32- and 64-bit versions
• Windows 7: 32- and 64-bit versions
• Windows Vista: 32- and 64-bit versions
• Windows XP: 32- and 64-bit versions
• Windows CE
• Mac OS-X: 10.6, and later versions
• Linux: Kernel version 2.6.35 and later versions
• Android: Gingerbread and later versions
• 512-byte flash for storing configuration parameters
• Clocking: Integrated 48-MHz clock oscillator
• USB suspend mode for low power
• Supports bus-/self-powered configurations
• Compatible with USB 2.0 and USB 3.0 host controllers
• Operating voltage: 1.71 to 5.50 V
• Operating temperature: Commercial: 0 °C to 70 °C, Industrial: -40 °C to 85 °C
• ESD protection: 2.2 kV HBM
• RoHS-compliant package
• 28 -pin SSOP (10×7.5×1.65 mm, 0.65-mm pitch)
• 32 -pin QFN (5×5×1 mm, 0.5 mm pitch)

• Blood glucose meter
• Battery-operated devices
• USB-to-UART cables
• Enables USB connectivity in legacy peripherals with UART
• Point-of-Sale (POS) terminals
• Industrial and T&M (Test and Measurement) devices