LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
TI TPS2837DR product image
Immagini a scopo illustrativo

TI TPS2837DR

Produttore
Cod. Prod.
TPS2837DR
Cod. LCSC
C2864650
Imballo
SOIC-8
Numero Cliente
Attr. chiave
4.5V~15V 5A 2.4A SOIC-8 Gate Drivers RoHS
Scheda TecnicaTI TPS2837DR
Conformità RoHS1 documenti disponibili
Parti alternative2
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 2.3814$ 2.38
200+$ 0.9228$ 184.56
500+$ 0.8895$ 444.75
1,000+$ 0.8736$ 873.60
Package Standard2500/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers
ProduttoreTI
ImballoSOIC-8
Input Logic Level - Low-
Low Level Delay Time-
High Level Delay Time-
Quiescent Current300uA
Input Logic Level - High-
Voltage - Supply4.5V~15V
Operating Temperature-40℃~+125℃
Driven ConfigurationHalf-Bridge
Current - Output Low(IOL)5A
Rise Time50ns
Fall Time40ns
FeaturesDead-time control;Interleaved conduction protection;Built-in bootstrap diode
Current - Output High(IOH)2.4A
Load TypeMOSFET

Descrizione

Traduzione AI

The TPS2836 and TPS2837 are MOSFET drivers for synchronous-buck power stages. These devices are ideal for designing a high-performance power supply using switching controllers that do not have MOSFET drivers. The drivers are designed to deliver minimum 2-A peak currents into large capacitive loads. The high-side driver can be configured as ground-reference or as floating-bootstrap. An adaptive dead-time control circuit eliminates shoot-through currents through the main power FETs during switching transitions and provides high efficiency for the buck regulator. The TPS2836 has a noninverting input, while the TPS2837 has an inverting input. These drivers, available in 8-terminal SOIC packages, operate over a junction temperature range of − 40°C to 125°C. The low-side driver is designed to drive low rDS(on) N-channel MOSFETs. The current rating of the driver is 2 A, source and sink. The high-side driver is designed to drive low rDS(on) N-channel MOSFETs. The current rating of the driver is 2 A, source and sink. The high-side driver can be configured as a ground-reference driver or a floating bootstrap driver. The internal bootstrap diode is a Schottky for improved drive efficiency. The maximum voltage that can be applied between the BOOT terminal and ground is 30 V. Dead-time control prevents shoot-through current from flowing through the main power FETs during switching transitions by controlling the turnon times of the MOSFET drivers. The high-side driver is not allowed to turn on until the gate drive voltage to the low-side FET is low, and the low-side driver is not allowed to turn on until the voltage at the junction of the power FETs (Vdrain) is low; the TTL-compatible DT terminal connects to the junction of the power FETs. The IN terminal is a TTL-compatible digital terminal that is the input control signal for the drivers. The TPS2836 has a noninverting input; the TPS2837 has an inverting input.

Caratteristiche

Traduzione AI
  • Floating Bootstrap or Ground-Reference High-Side Driver
  • Adaptive Dead-Time Control
  • 50-ns Max Rise/Fall Times With 3.3-nF Load
  • 2.4-A Typical Output Current
  • 4.5-V to 15-V Supply Voltage Range
  • TTL-Compatible Inputs
  • Internal Schottky Bootstrap Diode
  • Low Supply Current....3 mA Typical
  • Ideal for High-Current Single or Multiphase Power Supplies
  • − 40°C to 125°C Operating Virtual Junction-Temperature Range

Parti alternative

MPNProduttoreImballaggioDisponibilitàPrezzo unitario
TPS2836DRTISOIC-88$ 3.6478
TPS2837DTISOIC-80$ 3.2684