LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
MXIC MX29F200CBTI-70G product image
  • MX29F200CBTI-70G thumbnail 1
  • MX29F200CBTI-70G thumbnail 2
  • MX29F200CBTI-70G thumbnail 3
  • Pinout
  • Footprint
Immagini a scopo illustrativo

MXIC MX29F200CBTI-70G

Produttore
MXIC
Cod. Prod.
MX29F200CBTI-70G
Cod. LCSC
C2803065
Imballo
TSOPI-48
Numero Cliente
Attr. chiave
2M-bit single-voltage 5V flash memory
Scheda TecnicaMXIC MX29F200CBTI-70G
Parti alternative1
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 4.0832$ 4.08
10+$ 3.4827$ 34.83
30+$ 3.1246$ 93.74
100+$ 2.7633$ 276.33
500+$ 2.5976$ 1298.80
1,000+$ 2.5225$ 2522.50
Package Standard10/Full Tray
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Memory/Memory
ProduttoreMXIC
ImballoTSOPI-48
Operating Temperature-40℃~+85℃
FeaturesPower-on reset;Hardware write protection
Memory Size2Mbit
Voltage - Supply4.5V~5.5V
Program / Erase Cycles100,000 cycles
Clock Frequency5MHz
Data Retention - TDR (Year)20 Years
Block Erase Time(tBE)-
Write Cycle Time(tWC)-
Page Programming Time (Tpp)-
InterfaceParallel
Standby Supply Current1uA
Aiuto & FeedbackMostra prodotti simili (0) >

Caratteristiche

Traduzione AI
  • General Features
    • Single Power Supply Operation - 4.5 to 5.5 volt for read, erase, and program operations
    • 262,144×8 / 131,072 x 16 switchable
    • Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector
    • Sector Structure - 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1, and 64K-Byte x 3
    • Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotected allows code changes in previously locked sectors
    • Latch-up protected to 100mA from -1V to Vcc + 1V
    • Compatible with JEDEC standard - Pinout and software compatible to single power supply Flash
  • Performance
    • High Performance - Access time: 70/90ns - Byte/Word program time: 9us/11us (typical) - Erase time: 0.7s/sector, 4s/chip (typical)
    • Low Power Consumption - Low active read current: 40mA (maximum) at 5MHz - Low standby current: 1uA (typical)
    • Minimum 100,000 erase/program cycle
    • 20 years data retention
  • Software Features
    • Erase Suspend/ Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased
    • Status Reply - Data# Polling & Toggle bits provide detection of program and erase operation completion
  • Hardware Features
    • Ready/Busy# (RY/BY#) Output - Provides a hardware method of detecting program and erase operation completion
    • Hardware Reset (RESET#) Input - Provides a hardware method to reset the internal state machine to read mode
  • Package
    • 44-Pin SOP
    • 48-Pin TSOP
    • All devices are RoHS Compliant

Parti alternative

MPNProduttoreImballaggioDisponibilitàPrezzo unitario
MX29F200CBTI-70GTRMXICTSOP-480$ 5.2523