LCSC Electronics logoLCSC Electronics svg logo
Zaloguj
USD
TOREX XC9801B363KR-G product image
Zdjęcia poglądowe

TOREX XC9801B363KR-G

Producent
Nr części prod.
XC9801B363KR-G
Nr LCSC
C2476583
Opak.
MSOP-8
Numer Klienta
Klucz. cechy
300kHz 80mA 3.6V MSOP-8 Voltage Regulators - DC DC Switching Regulators RoHS
Karta KatalogowaTOREX XC9801B363KR-G
Zgodność z RoHS1 dokumentów dostępnych
Brak w magazynie
Powiadom mnie
Minimum: 1Wielokrotność: 1Jednostka sprzedaży: Piece
Dodaj do Listy BOM
Szt.Cena jedn.(Tylko do wglądu)Suma całkowita
1+$ 0.8879$ 0.89
200+$ 0.3441$ 68.82
500+$ 0.333$ 166.50
1,000+$ 0.3267$ 326.70
Standardowa Obudowa1000/Full Reel
Lepsza cena za większą ilość?
$

Specyfikacje Produktu

Wszystko
TypOpis
KategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
ProducentTOREX
Opak.MSOP-8
Operating Temperature-40℃~+85℃
Function-
Frequency - Switching300kHz
FeaturesLow ripple / low noise architecture;Low-power standby
Operating Voltage1.8V~5.5V
Output Current80mA
Output Voltage3.6V
Energy Efficiency99%
Quiescent Current-

Opis

Tłumaczenie AI

The XC9801 series are fixed regulated voltage step-up charge pump ICs which provide stable, highly efficient, positive voltages with the only external components required being 2 capacitors. Since regulating is done via the control of the charge pump's gate voltage waveform, ripple is minimal. Output voltage is selectable in 100mV steps within a 2.5V~6.0V range. Control of the XC9802 switches to PFM (pulse skip) during light loads without affecting output impedance or ripple so that the IC is protected against drops in efficiency. Connecting the SENSE pin to the GND pin allows the IC to be used as a voltage doubler. As well as the ultra small MSOP-8A and USP-8 and USP-8B05 packages, the small consumption current and high efficiencies of the series make the XC9801 suitable for use with all types of battery operated applications.

Funkcje

Tłumaczenie AI
  • Input Voltage Range: 1.8V~5.5V
  • Output Voltage Range: 2.5V~6.0V
  • Small Input Current: 80μA (no load:XC9802)
  • Output Current: 80mA (3.6V→5.0V step-up)
  • Oscillation Frequency: 300kHz
  • Stand-by Current (CE ’L’): 2.0μA (MAX.)
  • PFM Operation During Light Loads (XC9802)
  • CE (Chip Enable) Function
  • Can be used as a step-up doubler (sense = 0V)
  • Packages: MSOP-8A, USP-8, USP-8B05
  • Environmentally Friendly: EU RoHS Compliant, Pb Free

Zastosowania

Tłumaczenie AI
  • Power supplies for TFT
  • Power supplies for Opamp
  • Smart card
  • On board local power supplies
  • Various battery powered devices