SILICON LABS EFM32TG11B320F128IM64-BR

The EFM32 Tiny Gecko Series 1 MCUs are energy-friendly microcontrollers, featuring new connectivity interfaces and rich analog features. EFM32TG11 includes a powerful and efficient 32-bit ARM Cortex-M0+ and provides robust security via a unique cryptographic hardware engine supporting AES, ECC, SHA, and True Random Number Generator (TRNG). New features include a CAN bus controller, highly robust capacitive sensing, and LESENSE/PCNT enhancements for smart energy meters. These features, combined with ultra-low current active mode and short wake-up time from energy-saving modes, make EFM32TG11 microcontrollers well suited for any battery-powered application, as well as other systems requiring high performance and low-energy consumption.

• ARM Cortex-M0+ at 48 MHz
• Ultra low energy operation:
  • 37 µA/MHz in Energy Mode 0 (EM0)
  • 1.30 µA EM2 Deep Sleep current
• CAN 2.0 Bus Controller
• Low energy analog peripherals: ADC, DAC, OPAMP, Comparator, Segment LCD
• Hardware cryptographic engine supports AES, ECC, SHA, and TRNG
• Robust capacitive touch sense
• Footprint compatible with select EFM32 packages
• 5 V tolerant I/O
• ARM Cortex-M0+ CPU platform, High performance 32-bit processor up to 48 MHz
• Memory Protection Unit
• Wake-up Interrupt Controller
• 37 µA/MHz in Active Mode (EM0), 1.30 µA EM2 Deep Sleep current (8 kB RAM retention and RTCC running from LFRCO)
• Integrated DC-DC buck converter
• Backup Power Domain: RTCC and retention registers in a separate power domain, available in all energy modes, Operation from backup battery when main power absent/insufficient
• Up to 128 kB flash program memory
• Up to 32 kB RAM data memory
• Communication Interfaces:
  • CAN Bus Controller Version 2.0A and 2.0B up to 1 Mbps
  • 4x Universal Synchronous/Asynchronous Receiver/Transmitter UART/SPI/SmartCard (ISO 7816)/IrDA/I2S/LIN, Triple buffered full/half-duplex operation with flow control, Ultra high speed (24 MHz) operation on one instance
  • 1x Universal Asynchronous Receiver/Transmitter
  • 1x Low Energy UART, Autonomous operation with DMA in Deep Sleep Mode
  • 2x I²C Interface with SMBus support, Address recognition in EM3 Stop Mode
• Up to 67 General Purpose I/O Pins: Configurable push-pull, open-drain, pull-up/down, input filter, drive strength, Configurable peripheral I/O locations, 5V tolerance on select pins, Asynchronous external interrupts, Output state retention and wake-up from Shutoff Mode
• Up to 8 Channel DMA Controller
• Up to 8 Channel Peripheral Reflex System (PRS) for autonomous inter-peripheral signaling
• Hardware Cryptography:
  • AES 128/256-bit keys
  • ECC B/K163,B/K233,P192,P224,P256
  • SHA-1 and SHA-2 (SHA-224 and SHA-256)
  • True Random Number Generator (TRNG)
• Hardware CRC engine: Single-cycle computation with 8/16/32-bit data and 16-bit (programmable)/32-bit (fixed) polynomial
• Security Management Unit (SMU): Fine-grained access control for on-chip peripherals
• Integrated Low-energy LCD Controller with up to 8x32 segments: Voltage boost, contrast and autonomous animation, Patented low-energy LCD driver
• Ultra Low-Power Precision Analog Peripherals:
  • 12-bit 1 Msamples/s Analog to Digital Converter (ADC)
  • On-chip temperature sensor
  • 2x 12-bit 500 ksamples/s Digital to Analog Converter (VDAC)
  • Up to 2x Analog Comparator (ACMP)
  • Up to 4x Operational Amplifier(OPAMP)
  • Robust current-based capacitive sensing with up to 38 inputs and wake-on-touch (CSEN)
  • Up to 62 GPIO pins are analog-capable. Flexible analog peripheral-to-pin routing via Analog Port (APORT)
  • Supply Voltage Monitor
• Timers/Counters:
  • 2x 16-bit Timer/Counter, 3 or 4 Compare/Capture/PWM channels (4 + 4 on one timer instance), Dead-Time Insertion on one timer instance
  • 2x 32-bit Timer/Counter
  • 32-bit Real Time Counter and Calendar (RTCC)
  • 32-bit Ultra Low Energy CRYOTIMER for periodic wakeup from any Energy Mode
  • 16-bit Low Energy Timer for waveform generation
  • 16-bit Pulse Counter with asynchronous operation
  • Watchdog Timer with dedicated RC oscillator
• Low Energy Sensor Interface (LESENSE):
  • Autonomous sensor monitoring in Deep Sleep Mode
  • Wide range of sensors supported, including LC sensors and capacitive buttons
  • Up to 16 inputs
• Ultra efficient Power-on Reset and Brown-Out Detector
• Debug Interface:
  • 2-pin Serial Wire Debug interface
  • 4-pin JTAG interface
  • Micro Trace Buffer (MTB)
• Pre-Programmed UART Bootloader
• Wide Operating Range:
  • 1.8V to 3.8V single power supply
  • Integrated DC-DC, down to 1.8V output with up to 200 mA load current for system
  • Standard -40°C to 85°C (TA) and Extended -40°C to 125°C (TJ) temperature grades available

• Smart energy meters
• Entry-level wearables
• Industrial and factory automation
• Personal medical devices
• Home automation and security
• IoT devices