LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
10% OFF
MSKSEMI L293DN(MS) product image
  • L293DN(MS) thumbnail 1
  • L293DN(MS) thumbnail 2
  • L293DN(MS) thumbnail 3
  • Pinout
  • Footprint
Immagini a scopo illustrativo

MSKSEMI L293DN(MS)

Produttore
MSKSEMIAsian Brands
Cod. Prod.
L293DN(MS)
Cod. LCSC
C19632280
Imballo
DIP-16
Numero Cliente
Attr. chiave
Drive inductive loads and switch power transistors
Scheda TecnicaMSKSEMI L293DN(MS)
Disponibile: 293
293 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.Importo totale
1+$ 0.7031$ 0.6328$ 0.63
10+$ 0.5658$ 0.5093$ 5.09
25+$ 0.4979$ 0.4482$ 11.21
100+$ 0.43$ 0.3870$ 38.70
500+$ 0.3893$ 0.3504$ 175.20
1,000+$ 0.3682$ 0.3314$ 331.40
Package Standard25/Full Tube
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers
ProduttoreMSKSEMI
ImballoDIP-16
Drive Type-
Number of H-bridges-
FeaturesOver temperature protection
TechnologyYes
Interface-
Operating Temperature-40℃~+150℃
Step Resolution-
Output Current600mA
Control Voltage4.5V~36V
RDS(on)-
Motor Drive Voltage(Vm)-
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

The Device is a monolithic integrated high volt-age, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoides, DC and stepping motors) and switching power tran- sistors. To simplify use as two bridges each pair of chan-nels is equipped with an enable input. A separate supply input is provided for the logic, allowing op-eration at a lower voltage and internal clamp di-odes are included. The L293DN(MS) is assembled in a 16 lead plastic packaage which has 4 center pins connected to- gether and used for heatsinking.

Caratteristiche

Traduzione AI
  • 600mA OUTPUT CURRENT CAPABILITY PER CHANNEL
  • 1.2A PEAK OUTPUT CURRENT (non repeti- tive) PER CHANNEL
  • ENABLE FACILITY
  • OVERTEMPERATURE PROTECTION
  • LOGICAL "0" INPUT VOLTAGE UP TO 1.5 V (HIGH NOISE IMMUNITY) INTERNAL CLAMP DIODES