LCSC Electronics logoLCSC Electronics svg logo
Zaloguj
USD
TI BQ2050SN-D119 product image
  • BQ2050SN-D119 thumbnail 1
  • BQ2050SN-D119 thumbnail 2
  • BQ2050SN-D119 thumbnail 3
  • Rozmieszczenie wyprowadzeń
  • Footprint
Zdjęcia poglądowe

TI BQ2050SN-D119

Producent
Nr części prod.
BQ2050SN-D119
Nr LCSC
C188646
Opak.
SOIC-16
Numer Klienta
Klucz. cechy
Lithium Battery SOIC-16 Battery Management RoHS
Karta KatalogowaTI BQ2050SN-D119
Zgodność z RoHS1 dokumentów dostępnych
Części alternatywne1
Brak w magazynie
Powiadom mnie
Minimum: 1Wielokrotność: 1Jednostka sprzedaży: Piece
Dodaj do Listy BOM
Szt.Cena jedn.(Tylko do wglądu)Suma całkowita
1+$ 14.262$ 14.26
30+$ 13.1425$ 394.28
Standardowa Obudowa40/Full Tube
Lepsza cena za większą ilość?
$

Specyfikacje Produktu

Wszystko
TypOpis
KategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Battery Management
ProducentTI
Opak.SOIC-16
Operating Temperature0℃~+70℃
Interface-
Quiescent Current120uA
0V Battery Charge-
Operating Voltage3V~6.5V
Type of BatteryLithium Battery
FeaturesOver-discharge protection
The Chip TypeMonitoring IC
Balance Current-
Charge Current - Max-

Opis

Tłumaczenie AI

The bq2050 Lithium Ion Power Gauge™IC is intended for batterypack or in-system installation to maintain an accurate record of available battery capacity. The IC monitors a voltage drop across a sense resistor connected in series between the negative battery terminal and ground to determine charge and discharge activity of the battery. Compensations for battery temperature and rate of charge or discharge are applied to the charge, discharge, and self-discharge calculations to provide available capacity information across a wide range of operating conditions. Battery capacity is automatically recalibrated, or “learned,” in the course of a discharge cycle from full to empty. Nominal available capacity may be directly indicated using a fivesegment LED display. These segments are used to graphically indicate available capacity. The bq2050 supports a simple single-line bidirectional serial link to an external processor (common ground). The bq2050 outputs battery information in response to external commands over the serial link. The bq2050 may operate directly from one cell (V_{BAT}>3V). With the REF output and an external transistor, a simple, inexpensive regulator can be built for systems with more than one series cell. Internal registers include available capacity, temperature, scaled available energy, battery ID, battery status, and programming pin settings. To support subassembly testing, the outputs may also be controlled. The external processor may also overwrite some of the bq2050 power gauge data registers.

Funkcje

Tłumaczenie AI
  • Conservative and repeatable measurement of available capacity in Lithium Ion rechargeable batteries
  • Designed for battery pack integration
  • 120μA typical operating current
  • Small size enables implementations in as little as % square inch of PCB
  • Integrate within a system or as a stand-alone device
  • Display capacity via singlewire serial communication port or direct drive of LEDs
  • Measurements compensated for current and temperature
  • Self-discharge compensation using internal temperature sensor
  • 16-pin narrow SOIC

Części alternatywne

MPNProducentOpakowanieDostępnośćCena jednostkowa
BQ2050SN-D119TRTISOP-160$ 33.9162