LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Littelfuse 1.5SMB91CA product image
Abbildung ähnlich

Littelfuse 1.5SMB91CA

Hersteller
Herst.-Teilenr.
1.5SMB91CA
LCSC-Nr.
C1850446
Verp.
DO-214AA(SMBJ)
Kundennummer
Hauptmerkm.
161.5VC Clamp 67.1A@8/20us Ipp TVS DIODE DO-214AA(SMBJ)
DatenblattLittelfuse 1.5SMB91CA
Alternativteile5
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 0.2855$ 0.29
200+$ 0.1105$ 22.10
500+$ 0.1066$ 53.30
1,000+$ 0.1047$ 104.70
Standardgehäuse3000/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieCircuit Protection/Transient Voltage Suppressors (TVS)/TVS Diodes
HerstellerLittelfuse
Verp.DO-214AA(SMBJ)
Clamping Voltage161.5V
Operating Temperature-65℃~+150℃
Peak Pulse Current (Ipp)67.1A@8/20us
Peak Pulse Power Dissipation (Ppp)1.5kW@10/1000us
Number of Channels1
Voltage - Breakdown95.5V
typeTVS
PolarityBidirectional
Reverse Leakage Current (Ir)1uA
Reverse Stand-Off Voltage (Vrwm)77.8V

Beschreibung

KI-Übersetzung

The 1.5SMB Series is designed specifcally to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Merkmale

KI-Übersetzung
  • For surface mounted applications to optimize board space
  • Low profle package
  • Typical failure mode is short from over-specifed voltage or current
  • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
  • ESD protection of data lines in accordance with IEC 61000-4-2, 30kV(Air), 30kV (Contact)
  • EFT protection of data lines in accordance with IEC 61000-4-4
  • Built-in strain relief
  • Glass passivated chip junction
  • 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles): 0.01%
  • Excellent clamping capability
  • Low incremental surge resistance
  • Meet MSL level 1 per J-STD-020, and high temperature soldering guaranteed: 260C/10sec
  • Matte tin lead–free Plated
  • Halogen free and RoHS compliant
  • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal fnish material is tin(Sn) (IPC/JEDEC J-STD-609A.01)

Anwendungen

KI-Übersetzung
  • TVS components are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications.

Alternativteile

MPNHerstellerVerpackungVerfügbarkeitStückpreis
1.5SMB75CALittelfuseDO-214AA(SMBJ)41$ 0.7604
1.5SMB82CALittelfuseDO-214AA(SMBJ)0$ 0.2855
1.5SMBJ75CABORNDO-214AA(SMB)0$ 0.1271
1.5SMB100ALittelfuseDO-214AA(SMBJ)0$ 0.2617
1.5SMB100CALittelfuseDO-214AA0$ 0.2855