LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
onsemi FAN3100CSX product image
  • FAN3100CSX thumbnail 1
  • FAN3100CSX thumbnail 2
  • FAN3100CSX thumbnail 3
  • Pinout
  • Footprint
Immagini a scopo illustrativo

onsemi FAN3100CSX

Produttore
Cod. Prod.
FAN3100CSX
Cod. LCSC
C184477
Imballo
SOT-23-5
Numero Cliente
Attr. chiave
Single 2 A High-Speed Low-Side Gate Driver
Scheda Tecnicaonsemi FAN3100CSX
Conformità RoHS4 documenti disponibili
Parti alternative2
Disponibile: 30
30 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.Importo totale
1+$ 0.9677$ 0.97
10+$ 0.7784$ 7.78
30+$ 0.6838$ 20.51
100+$ 0.5891$ 58.91
500+$ 0.5336$ 266.80
1,000+$ 0.5043$ 504.30
Package Standard3000/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers
Produttoreonsemi
ImballoSOT-23-5
Input Logic Level - Low-
Rise Time13ns
Low Level Delay Time-
High Level Delay Time-
Fall Time9ns
FeaturesEnable shutdown
Current - Output High(IOH)3A
Load TypeMOSFET
Quiescent Current200uA
Input Logic Level - High-
Voltage - Supply4.5V~18V
Driven ConfigurationLow Side
Current - Output Low(IOL)3A

Descrizione

Traduzione AI

The FAN3100 2 A gate driver is designed to drive an N−channel enhancement−mode MOSFET in low−side switching applications by providing high peak current pulses during the short switching intervals. The driver is available with either TTL (FAN3100T) or CMOS (FAN3100C) input thresholds. Internal circuitry provides an under−voltage lockout function by holding the output LOW until the supply voltage is within the operating range. The FAN3100 delivers fast MOSFET switching performance, which helps maximize efficiency in high−frequency power converter designs.

FAN3100 drivers incorporate MillerDrive architecture for the final output stage. This bipolar−MOSFET combination provides high peak current during the Miller plateau stage of the MOSFET turn−on / turn−off process to minimize switching loss, while providing rail−to−rail voltage swing and reverse current capability.

The FAN3100 also offers dual inputs that can be configured to operate in non−inverting or inverting mode and allow implementation of an enable function. If one or both inputs are left unconnected, internal resistors bias the inputs such that the output is pulled LOW to hold the power MOSFET off.

The FAN3100 is available in a lead−free finish, 2x2 mm, 6−lead, Molded Leadless Package (MLP) for the smallest size with excellent thermal performance; or industry−standard, 5−pin, SOT23.

Caratteristiche

Traduzione AI
  • 3 A Peak Sink/Source at VDD = 12 V
  • 4.5 to 18 V Operating Range
  • 2.5 A Sink/1.8 A Source at VOUT = 6 V
  • Dual−Logic Inputs Allow Configuration as Non−Inverting or Inverting with Enable Function
  • Internal Resistors Turn Driver Off If No Inputs
  • 13 ns Typical Rise Time and 9 ns Typical Fall−Time with 1 nF Load
  • Choice of TTL or CMOS Input Thresholds
  • MillerDrive Technology Typical Propagation Delay Time Under 20 ns with Input Falling or Rising
  • 6−Lead, 2x2 mm MLP or 5−Pin, SOT23 Packages
  • Rated from -40°C to 125°C Ambient
  • These Devices are Pb−Free and Halogen Free

Applicazioni

Traduzione AI
  • Switch−Mode Power Supplies (SMPS)
  • High−Efficiency MOSFET Switching
  • Synchronous Rectifier Circuits
  • DC−to−DC Converters
  • Motor Control

Parti alternative

MPNProduttoreImballaggioDisponibilitàPrezzo unitario
JSM27517JSMSEMISOT-23-52,670$0.3324 $0.3498
FAN3100TSXonsemiSOT-23-51,555$ 0.6579