LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
NXP MKE06Z128VLK4 product image
Immagini a scopo illustrativo

NXP MKE06Z128VLK4

Produttore
Cod. Prod.
MKE06Z128VLK4
Cod. LCSC
C1340964
Imballo
LQFP-80(14x14)
Numero Cliente
Attr. chiave
ARM Cortex-M0+ 32 Bit 48MHz LQFP-80(14x14) Microcontrollers RoHS
Scheda TecnicaNXP MKE06Z128VLK4
Conformità RoHS2 documenti disponibili
Parti alternative4
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 9.8087$ 9.81
10+$ 9.4769$ 94.77
Package Standard450/Full Tray
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Embedded/Microcontrollers
ProduttoreNXP
ImballoLQFP-80(14x14)
DAC (Bit)6bit
ADC (Bit)12bit
Number of I/O71
Operating Temperature-40℃~+105℃
Voltage - Supply2.7V~5.5V
Program Memory TypeFLASH
EEPROM-
Program Storage Size128KB
CPU CoreARM Cortex-M0+
Core Size32 Bit
CPU Maximum Speed48MHz
Oscillator TypeBuilt-in

Caratteristiche

Traduzione AI
  • Operating Range:
    • Voltage range: 2.7 to 5.5 V; Flash programming voltage range: 2.7 to 5.5 V
    • Temperature range (ambient): -40 to 105℃
  • Performance:
    • ARM Cortex-M0+ core up to 48 MHz
    • Single-cycle 32-bit × 32-bit multiplier
    • Single-cycle I/O access port
  • Memory and Memory Interface:
    • Flash up to 128 KB
    • RAM up to 16 KB
  • Clocking:
    • Oscillator (OSC) — supports 32.768 kHz crystal or 4 MHz to 24 MHz crystal or ceramic resonator; selectable low-power or high-gain oscillator
    • Internal Clock Source (ICS) — internal FLL with integrated internal or external reference clock source; 37.5 kHz pre-calibrated internal reference clock source, usable for 48 MHz system clock
    • Internal 1 kHz low-power oscillator (LPO)
  • System Peripherals:
    • Power Management Controller (PMC) with three power modes: run, standby, and stop
    • Low-Voltage Detection (LVD) with reset, interrupt, and selectable trip point
    • Watchdog (WDOG) with independent clock source
    • Configurable Cyclic Redundancy Check (CRC) module
    • Serial Wire Debug (SWD) interface
    • SRAM bit-manipulation mapping region (BIT-BAND)
    • Bit Manipulation Engine (BME)
  • Security and Integrity Modules:
    • 80-bit unique identification (ID) number per device
  • Human-Machine Interface:
    • Up to 71 general-purpose I/O (GPIO)
    • Two 32-bit Keyboard Interrupt (KBI) modules
    • External Interrupt (IRQ) module
  • Analog Modules:
    • One 16-channel, 12-bit SAR ADC, operable in stop mode, with selectable hardware trigger source (ADC)
    • Two analog comparators (ACMP) with 6-bit DAC and configurable reference input
  • Timers:
    • One 6-channel FlexTimer/PWM (FTM)
    • Two 2-channel FlexTimer/PWM (FTM)
    • One 2-channel Periodic Interrupt Timer (PIT)
    • One Pulse Width Counter (PWT)
    • One Real-Time Clock (RTC)
  • Communication Interfaces:
    • Two SPI modules (SPI)
    • Three UART modules (UART)
    • Two I²C modules (I²C)
    • One MSCAN module (MSCAN)
  • Package Options:
    • 80-pin LQFP
    • 64-pin QFP/LQFP
    • 44-pin LQFP

Parti alternative

MPNProduttoreImballaggioDisponibilitàPrezzo unitario
MKE04Z128VLK4NXPLQFP-80(14x14)12$ 4.2675
S9KEAZ128AMLKNXPLQFP-80(14x14)5$ 3.8493
S9KEAZ128AVLKNXPLQFP-80(14x14)5$ 12.5626
S9KEAZ128ACLKNXPLQFP-80(14x14)0$ 2.4695