TI CC2650F128RGZT

The CC2650 device is a wireless MCU targeting Bluetooth, ZigBee and 6LoWPAN, and ZigBee RF4CE remote control applications. The device is a member of the CC26xx family of cost - effective, ultralow power, 2.4 - GHz RF devices. Very low active RF and MCU current and low - power mode current consumption provide excellent battery lifetime and allow for operation on small coin cell batteries and in energy - harvesting applications. The CC2650 device contains a 32 - bit ARM Cortex - M3 processor that runs at 48 MHz as the main processor and a rich peripheral feature set that includes a unique ultralow power sensor controller. This sensor controller is ideal for interfacing external sensors and for collecting analog and digital data autonomously while the rest of the system is in sleep mode. Thus, the CC2650 device is ideal for applications within a whole range of products including industrial, consumer electronics, and medical. The Bluetooth Low Energy controller and the IEEE 802.15.4 MAC are embedded into ROM and are partly running on a separate ARM Cortex - M0 processor. This architecture improves overall system performance and power consumption and frees up flash memory for the application.

• Microcontroller
  • Powerful ARM Cortex - M3 – EEMBC CoreMark Score: 142
  • Up to 48 - MHz Clock Speed
  • 128KB of In - System Programmable Flash
  • 8KB of SRAM for Cache
  • 20KB of Ultralow - Leakage SRAM
  • 2 - Pin cJTAG and JTAG Debugging
  • Supports Over - The - Air Upgrade (OTA)
• Ultralow - Power Sensor Controller
  • Can Run Autonomous From the Rest of the System
  • 16 - Bit Architecture
  • 2KB of Ultralow - Leakage SRAM for Code and Data
• Efficient Code Size Architecture, Placing Drivers, Bluetooth Low Energy Controller, IEEE 802.15.4 MAC, and Bootloader in ROM
• RoHS - Compliant Packages
  • 4mm×4mm RSM VQFN32 (10 GPIOs)
  • 5mm×5mm RHB VQFN32 (15 GPIOs)
  • 7mm×7mm RGZ VQFN48 (31 GPIOs)
• Peripherals
  • All Digital Peripheral Pins Can Be Routed to Any GPIO
  • Four General - Purpose Timer Modules (Eight 16 - Bit or Four 32 - Bit Timers, PWM Each)
  • 12 - Bit ADC, 200 - ksamples/s, 8 - Channel Analog MUX
  • Continuous Time Comparator
  • Ultralow - Power Analog Comparator
  • Programmable Current Source
  • UART
  • 2×SSI (SPI, MICROWIRE, TI)
  • I2C
  • I2S
  • Real - Time Clock (RTC)
  • AES - 128 Security Module
  • True Random Number Generator (TRNG)
  • 10, 15, or 31 GPIOs, Depending on Package Option
  • Support for Eight Capacitive - Sensing Buttons
  • Integrated Temperature Sensor
• External System
  • On - Chip internal DC - DC Converter
  • Very Few External Components
  • Seamless Integration With the SimpleLink CC2590 and CC2592 Range Extenders
  • Pin Compatible With the SimpleLink CC13xx in 4 - mm×4 - mm and 5 - mm×5 - mm QFN Packages
• Low Power
  • Wide Supply Voltage Range
    • Normal Operation: 1.8 to 3.8V
    • External Regulator Mode: 1.7 to 1.95 V
  • Active - Mode RX: 5.9 mA
  • Active - Mode TX at 0 dBm: 6.1 mA
  • Active - Mode TX at +5 dBm: 9.1 mA
  • Active - Mode MCU: 61 μA/MHz
  • Active - Mode MCU: 48.5 CoreMark/mA
  • Active - Mode Sensor Controller: 8.2 μA/MHz
  • Standby: 1 μA (RTC Running and RAM/CPU Retention)
  • Shutdown: 100 nA (Wake Up on External Events)
• RF Section
  • 2.4 - GHz RF Transceiver Compatible With Bluetooth Low Energy (BLE) 4.2 Specification and IEEE 802.15.4 PHY and MAC
  • Excellent Receiver Sensitivity (–97 dBm for BLE and –100 dBm for 802.15.4), Selectivity, and Blocking Performance
  • Link budget of 102 dB/105 dB (BLE/802.15.4)
  • Programmable Output Power up to +5 dBm
  • Single - Ended or Differential RF Interface
  • Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations
    • ETSI EN 300 328 (Europe)
    • EN 300 440 Class 2 (Europe)
    • FCC CFR47 Part 15 (US)
    • ARIB STD - T66 (Japan)
• Tools and Development Environment
  • Full - Feature and Low - Cost Development Kits
  • Multiple Reference Designs for Different RF Configurations
  • Packet Sniffer PC Software
  • Sensor Controller Studio
  • SmartRF Studio
  • SmartRF Flash Programmer 2
  • IAR Embedded Workbench for ARM
  • Code Composer Studio

• Consumer Electronics
• Mobile Phone Accessories
• Sports and Fitness Equipment
• HID Applications
• Home and Building Automation
  • Lighting Control
  • Alarm and Security
• Electronic Shelf Labeling
• Proximity Tags
• Medical
• Remote Controls
• Wireless Sensor Networks