LCSC Electronics logoLCSC Electronics svg logo
Zaloguj
USD
Koszyk
ADI LTC3728LCGN#TRPBF product image
Zdjęcia poglądowe

ADI LTC3728LCGN#TRPBF

Producent
ADI
Nr części prod.
LTC3728LCGN#TRPBF
Nr LCSC
C685802
Opak.
SSOP-28-150mil
Numer Klienta
Klucz. cechy
2 Adjustable Step-down type SSOP-28-150mil DC DC Switching Controllers RoHS
Karta KatalogowaADI LTC3728LCGN#TRPBF
Zgodność z RoHS1 dokumentów dostępnych
Brak w magazynie
Powiadom mnie
Minimum: 1Wielokrotność: 1Jednostka sprzedaży: Piece
Dodaj do Listy BOM
Szt.Cena jedn.(Tylko do wglądu)Suma całkowita
1+$ 7.3948$ 7.39
200+$ 2.8616$ 572.32
500+$ 2.7613$ 1380.65
1,000+$ 2.7119$ 2711.90
Standardowa Obudowa2500/Full Reel
Lepsza cena za większą ilość?
$

Specyfikacje Produktu

Wszystko
TypOpis
KategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/DC DC Switching Controllers
ProducentADI
Opak.SSOP-28-150mil
Operating Temperature0℃~+85℃@(TA)
Synchronous RectifierYes
Output Current-
FeaturesAdjustable soft-start;Protection latch;Frequency synchronization;Light load efficient mode;Operating status indication;Overcurrent Protection
Number of Channels2
TopologyBuck
Frequency - Switching550kHz
Operating Voltage4.5V~28V
Output TypeAdjustable
Switch tube (built-in/external)External
Output Voltage-
FunctionStep-down type
Quiescent Current20uA
Pomoc i opiniePokaż podobne produkty (0) >

Opis

Tłumaczenie AI

The LTC3728L/LTC3728LX are dual high performance step-down switching regulator controllers that drive all N‑channel synchronous power MOSFET stages. A constant-frequency, current mode architecture allows phase-lockable frequency of up to 550kHz. Power loss and noise due to the ESR of the input capacitors are minimized by operating the two controller output stages out of phase.

OPTI-LOOP compensation allows the transient response to be optimized over a wide range of output capacitance and ESR values. The precision 0.8V reference and power good output indicator are compatible with future microprocessor generations, and a wide 4.5V to 28V (30V maximum) input supply range encompasses all battery chemistries.

A RUN/SS pin for each controller provides both softstart and optional timed, short-circuit shutdown. Current foldback limits MOSFET dissipation during short-circuit conditions when overcurrent latchoff is disabled. Output overvoltage protection circuitry latches on the bottom MOSFET until VOUT returns to normal. The FCB mode pin can select among Burst Mode, constant-frequency mode and continuous inductor current mode or regulate a secondary winding. The LTC3728L/LTC3728LX include a power good output pin that indicates when both outputs are within 7.5% of their designed set point.

Funkcje

Tłumaczenie AI
  • Dual, 180° Phased Controllers Reduce Required Input Capacitance and Power Supply Induced Noise
  • OPTI-LOOP Compensation Minimizes COUT
  • ±1% Output Voltage Accuracy (LTC3728LC)
  • Power Good Output Voltage Indicator
  • Phase-Lockable Fixed Frequency 250kHz to 550kHz
  • Dual N-Channel MOSFET Synchronous Drive
  • Wide VIN Range: 4.5V to 28V Operation
  • Very Low Dropout Operation: 99% Duty Cycle
  • Adjustable Soft-Start Current Ramping
  • Foldback Output Current Limiting
  • Latched Short-Circuit Shutdown with Defeat Option
  • Output Overvoltage Protection
  • Low Shutdown IQ: 20µA
  • 5V and 3.3V Standby Regulators
  • 3 Selectable Operating Modes: Constant-Frequency, Burst Mode Operation and PWM
  • 5mm × 5mm QFN and 28-Lead Narrow SSOP Packages

Zastosowania

Tłumaczenie AI
  • Notebook and Palmtop Computers
  • Telecom Systems
  • Portable Instruments
  • Battery-Operated Digital Devices
  • DC Power Distribution Systems