LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
MICROCHIP dsPIC33FJ64MC506A-E/MR product image
Abbildung ähnlich

MICROCHIP dsPIC33FJ64MC506A-E/MR

Hersteller
MICROCHIP
Herst.-Teilenr.
dsPIC33FJ64MC506A-E/MR
LCSC-Nr.
C642872
Verp.
QFN-64-EP(9x9)
Kundennummer
Hauptmerkm.
160MHz QFN-64-EP(9x9) DSP (Digital Signal Processors) RoHS
DatenblattMICROCHIP dsPIC33FJ64MC506A-E/MR
RoHS-Konformität1 Dokumente verfügbar
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 18.3704$ 18.37
200+$ 7.1093$ 1421.86
500+$ 6.8592$ 3429.60
1,000+$ 6.7358$ 6735.80
Standardgehäuse40/Full Tube
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Embedded/DSP (Digital Signal Processors)
HerstellerMICROCHIP
Verp.QFN-64-EP(9x9)
FeaturesHardware MAC acceleration;Zero-overhead loop;Low-power mode;Integrated PWM control;Integrated ADC interface;DMA data transfer;Interrupt response;RTC and timer;High-speed peripheral interface
Clock Rate160MHz
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Merkmale

KI-Übersetzung
  • Code-efficient (C and Assembly) architecture
  • Two 40-bit wide accumulators
  • Single-cycle (MAC/MPY) with dual data fetch
  • Single-cycle mixed-sign MUL plus hardware divide
  • ±2% internal oscillator
  • Programmable PLLs and oscillator clock sources
  • Fail-Safe Clock Monitor (FSCM)
  • Independent Watchdog Timer (WDT)
  • Fast wake-up and start-up
  • Low-power management modes (Sleep, Idle, Doze)
  • Integrated Power-on Reset and Brown-out Reset
  • 1.35 mA/MHz dynamic current (typical)
  • 55 μA IPD current (typical)
  • Up to four PWM generators with eight outputs
  • Dead Time for rising and falling edges
  • 12.5 ns PWM resolution
  • PWM support for Motor Control: BLDC, PMSM, ACIM, and SRM
  • Programmable Fault inputs
  • Flexible trigger for ADC conversions and configurations
  • Two ADC modules: Configurable as 10-bit, 1.1 Msps with four S&H or 12-bit, 500 ksps with one S&H; 18 analog inputs on 64-pin devices and up to 32 analog inputs on 100-pin devices; Flexible and independent ADC trigger sources
  • Up to nine 16-bit timers/counters. Can pair up to make four 32-bit timers. Eight Output Compare modules configurable as timers/counters
  • Eight Input Capture modules
  • Two UART modules (10 Mbps) - With support for LIN 2.0 protocols and IrDA
  • Two 4-wire SPI modules (15 Mbps)
  • Up to two I²C modules (up to 1 Mbaud) with SMBus support
  • Up to two Enhanced CAN (ECAN) modules (1 Mbaud) with 2.0B support
  • Quadrature Encoder Interface (QEI) module
  • Data Converter Interface (DCI) module with I²S codec support
  • Sink/Source up to 10 mA (pin specific) for standard VOH/VOL, up to 16 mA (pin specific) for nonstandard VOH1
  • 5V-tolerant pins
  • Selectable open drain, pull-ups, and pull-downs
  • Up to 5 mA overvoltage clamp current
  • External interrupts on all I/O pins
  • AEC-Q100 REVG (Grade 1 -40°C to +125°C)
  • AEC-Q100 REVG (Grade 0 -40°C to +150°C)
  • Class B Safety Library, IEC 60730
  • In-circuit and in-application programming
  • Two program and two complex data breakpoints
  • IEEE 1149.2-compatible (JTAG) boundary scan
  • Trace and run-time watch

Anwendungen

KI-Übersetzung
  • Brushless DC motors
  • Single and 3-phase induction motors
  • Switched reluctance motors
  • Uninterrupted Power Supply (UPS)
  • Inverters
  • Switched mode power supplies
  • Power factor correction
  • Controlling the power management module in servers
  • Telecommunication equipment
  • Other industrial equipment