MICROCHIP PIC32MM0016GPL028-I/SS

Hersteller	MICROCHIP
Herst.-Teilenr.	PIC32MM0016GPL028-I/SS
LCSC-Nr.	C641978
Verp.	SSOP-28-208mil
Kundennummer
Hauptmerkm.	MIPS32 microAptiv 32 Bit 25MHz SSOP-28-208mil Microcontrollers RoHS
Datenblatt	MICROCHIP PIC32MM0016GPL028-I/SS
RoHS-Konformität	2 Dokumente verfügbar
Alternativteile	9

Produktspezifikationen

Alle

Typ	Beschreibung
Kategorie	Integrated Circuits (ICs)/Embedded/Microcontrollers
Hersteller	MICROCHIP
Verp.	SSOP-28-208mil
DAC (Bit)	5bit
ADC (Bit)	10bit;12bit
Number of I/O	22
Operating Temperature	-40℃~+85℃
Voltage - Supply	2V~3.6V
Program Memory Type	FLASH
EEPROM	-
Program Storage Size	16KB
CPU Core	MIPS32 microAptiv
Core Size	32 Bit
CPU Maximum Speed	25MHz
Oscillator Type	Built-in

Typ	Beschreibung
Kategorie	Integrated Circuits (ICs)/Embedded/Microcontrollers
Hersteller	MICROCHIP
Verp.	SSOP-28-208mil
DAC (Bit)	5bit
ADC (Bit)	10bit;12bit
Number of I/O	22
Operating Temperature	-40℃~+85℃
Voltage - Supply	2V~3.6V

Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Merkmale

KI-Übersetzung

Low Pin Count Packages, ranging from 20 to 36 Pins, including UQFN as small as 4x4 mm
Up to 64K Flash Memory:
- 20,000 erase/write cycle endurance
- 20 years minimum data retention
- Self-programmable under software control
Up to 8K Data Memory
Pin-Compatible with most PIC24 MCU/dsPIC DSC devices
Multiple Interrupt Vectors with individually programmable priority
Fail-Safe Clock Monitor mode
Configurable Watchdog Timer with on-chip, low-power RC oscillator
Programmable Code Protection
Selectable Oscillator Options including:
- High-precision, 8 MHz internal Fast RC (FRC) oscillator
- High-speed crystal/resonator oscillator or external clock
- 2x/3x/4x/6x/12x/24x PLL, which can be clocked from the FRC or primary oscillator
Atomic Set, Clear and Invert Operation on select Peripheral Registers
High-Current Sink/Source 11 mA/16 mA on all ports
Independent, low-power 32 kHz Timer Oscillator
Two 4-Wire SPI modules (up to 25 MHz non-PPS, 20 MHz PPS):
- 16-byte FIFO
- I2S mode
Two UARTs:
- RS-232, RS-485 and LIN/J2602 support
- IrDA with on-chip hardware encoder and decoder
External Edge and Level Change Interrupt on all ports
CRC module
Hardware Real-Time Clock and Calendar (RTCC)
Up to 20 Peripheral Pin Select (PPS) Remappable Pins
Seven Total 16-Bit Timers:
- Timer1: Dedicated 16-bit timer/counter
- Two additional 16-bit timers in each MCCP and SCCP module
Capture/Compare/PWM/Timer modules:
- Two 16-bit timers or one 32-bit timer in each module
- PWM resolution down to 21 ns
- One Multiple Output (MCCP) module:
  - Flexible configuration as PWM, input capture, output compare or timers
  - Six PWM outputs
  - Programmable dead time
  - Auto-shutdown
- Two Single Output (SCCP) modules:
  - Flexible configuration as PWM, input capture, output compare or timers
  - Single PWM output
Reference Clock Output (REFO)
Two Configurable Logic Cells (CLC) with Internal Connections to select Peripherals and PPS
Two Programming and Debugging Interfaces:
- 2-wire ICSP interface with non-intrusive access and real-time data exchange with application
- 4-wire MIPS standard Enhanced JTAG interface
IEEE Standard 1149.2 Compatible (JTAG) Boundary Scan
Two Analog Comparators with Input Multiplexing
Programmable High/Low-Voltage Detect (HLVD)
5-Bit DAC with Output Pin
Up to 14-Channel, Software-Selectable 10/12-Bit SAR Analog-to-Digital Converter (ADC):
- 12-bit, up to 222k samples/second conversion rate
- 10-bit, up to 250k samples/second conversion rate
- Sleep mode operation
- Band gap reference input feature
- Windowed threshold compare feature
- Auto-scan feature
Brown-out Reset (BOR)
microAptiv UC 32-Bit Core with 5-Stage Pipeline
microMIPS Instruction Set for 35% Smaller Code and 98% Performance compared to MIPS32 Instructions
DC-25 MHz Operating Frequency
3.17 CoreMark/MHz (79 CoreMark) Performance
1.53 DMIPS/MHz (37 DMIPS) (Dhrystone 2.1) Performance
16-Bit/32-Bit Wide Instructions with 32-Bit Wide Data Path
Two Sets of 32 Core Register Files (32-bit) to Reduce Interrupt Latency
Single-Cycle 32x16 Multiply and Two-Cycle 32x32 Multiply
Hardware Divide Unit
64-Bit, Zero Wait State Flash with ECC to Maximize Endurance/Retention
Low-Power modes:
- Idle: CPU off, peripherals run from system clock
- Sleep: CPU and peripherals off
- Fast wake-up Sleep with retention
- Low-power Sleep with retention
0.5 μA Sleep Current for Regulator Retention mode and 5 μA for Regulator Standby mode
On-Chip 1.8V Voltage Regulator (VREG)
On-Chip Ultra Low-Power Retention Regulator

Nicht vorrätig

Benachrichtigen

Minimum: 1Vielfaches: 1Verkaufseinheit: Piece

Zur BOM-Liste hinzufügen

Stk.	E-Preis(Nur als Referenz)	Gesamtbetrag
1+	$ 1.508	$ 1.51
200+	$ 0.585	$ 117.00
500+	$ 0.5634	$ 281.70
1,000+	$ 0.5542	$ 554.20
Standardgehäuse47/Full Tube

Besserer Preis bei größerer Menge?

Produktspezifikationen

Alle

Typ	Beschreibung
Kategorie	Integrated Circuits (ICs)/Embedded/Microcontrollers
Hersteller	MICROCHIP
Verp.	SSOP-28-208mil
DAC (Bit)	5bit
ADC (Bit)	10bit;12bit
Number of I/O	22
Operating Temperature	-40℃~+85℃
Voltage - Supply	2V~3.6V
Program Memory Type	FLASH
EEPROM	-
Program Storage Size	16KB
CPU Core	MIPS32 microAptiv
Core Size	32 Bit
CPU Maximum Speed	25MHz
Oscillator Type	Built-in

Typ	Beschreibung
Kategorie	Integrated Circuits (ICs)/Embedded/Microcontrollers
Hersteller	MICROCHIP
Verp.	SSOP-28-208mil
DAC (Bit)	5bit
ADC (Bit)	10bit;12bit
Number of I/O	22
Operating Temperature	-40℃~+85℃
Voltage - Supply	2V~3.6V

Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Merkmale

KI-Übersetzung

Low Pin Count Packages, ranging from 20 to 36 Pins, including UQFN as small as 4x4 mm
Up to 64K Flash Memory:
- 20,000 erase/write cycle endurance
- 20 years minimum data retention
- Self-programmable under software control
Up to 8K Data Memory
Pin-Compatible with most PIC24 MCU/dsPIC DSC devices
Multiple Interrupt Vectors with individually programmable priority
Fail-Safe Clock Monitor mode
Configurable Watchdog Timer with on-chip, low-power RC oscillator
Programmable Code Protection
Selectable Oscillator Options including:
- High-precision, 8 MHz internal Fast RC (FRC) oscillator
- High-speed crystal/resonator oscillator or external clock
- 2x/3x/4x/6x/12x/24x PLL, which can be clocked from the FRC or primary oscillator
Atomic Set, Clear and Invert Operation on select Peripheral Registers
High-Current Sink/Source 11 mA/16 mA on all ports
Independent, low-power 32 kHz Timer Oscillator
Two 4-Wire SPI modules (up to 25 MHz non-PPS, 20 MHz PPS):
- 16-byte FIFO
- I2S mode
Two UARTs:
- RS-232, RS-485 and LIN/J2602 support
- IrDA with on-chip hardware encoder and decoder
External Edge and Level Change Interrupt on all ports
CRC module
Hardware Real-Time Clock and Calendar (RTCC)
Up to 20 Peripheral Pin Select (PPS) Remappable Pins
Seven Total 16-Bit Timers:
- Timer1: Dedicated 16-bit timer/counter
- Two additional 16-bit timers in each MCCP and SCCP module
Capture/Compare/PWM/Timer modules:
- Two 16-bit timers or one 32-bit timer in each module
- PWM resolution down to 21 ns
- One Multiple Output (MCCP) module:
  - Flexible configuration as PWM, input capture, output compare or timers
  - Six PWM outputs
  - Programmable dead time
  - Auto-shutdown
- Two Single Output (SCCP) modules:
  - Flexible configuration as PWM, input capture, output compare or timers
  - Single PWM output
Reference Clock Output (REFO)
Two Configurable Logic Cells (CLC) with Internal Connections to select Peripherals and PPS
Two Programming and Debugging Interfaces:
- 2-wire ICSP interface with non-intrusive access and real-time data exchange with application
- 4-wire MIPS standard Enhanced JTAG interface
IEEE Standard 1149.2 Compatible (JTAG) Boundary Scan
Two Analog Comparators with Input Multiplexing
Programmable High/Low-Voltage Detect (HLVD)
5-Bit DAC with Output Pin
Up to 14-Channel, Software-Selectable 10/12-Bit SAR Analog-to-Digital Converter (ADC):
- 12-bit, up to 222k samples/second conversion rate
- 10-bit, up to 250k samples/second conversion rate
- Sleep mode operation
- Band gap reference input feature
- Windowed threshold compare feature
- Auto-scan feature
Brown-out Reset (BOR)
microAptiv UC 32-Bit Core with 5-Stage Pipeline
microMIPS Instruction Set for 35% Smaller Code and 98% Performance compared to MIPS32 Instructions
DC-25 MHz Operating Frequency
3.17 CoreMark/MHz (79 CoreMark) Performance
1.53 DMIPS/MHz (37 DMIPS) (Dhrystone 2.1) Performance
16-Bit/32-Bit Wide Instructions with 32-Bit Wide Data Path
Two Sets of 32 Core Register Files (32-bit) to Reduce Interrupt Latency
Single-Cycle 32x16 Multiply and Two-Cycle 32x32 Multiply
Hardware Divide Unit
64-Bit, Zero Wait State Flash with ECC to Maximize Endurance/Retention
Low-Power modes:
- Idle: CPU off, peripherals run from system clock
- Sleep: CPU and peripherals off
- Fast wake-up Sleep with retention
- Low-power Sleep with retention
0.5 μA Sleep Current for Regulator Retention mode and 5 μA for Regulator Standby mode
On-Chip 1.8V Voltage Regulator (VREG)
On-Chip Ultra Low-Power Retention Regulator

C641978 EasyEDA-Bibliothek

This image shows the pinout diagram of PIC32MM0016GPL028-I/SS

This image shows the footprint diagram of PIC32MM0016GPL028-I/SS

Compliance & Exportcodes

Typ	Details
RoHS	ROHS3 Compliant
ECCN	3A991A2
CNHTS	8542319090
USHTS
TARIC
CAHTS
BRHTS
INHTS
MXHTS

Typ	Details
RoHS	ROHS3 Compliant
ECCN	3A991A2
CNHTS	8542319090
USHTS
TARIC

Typ	Details
CAHTS
BRHTS
INHTS
MXHTS

Alternativteile

MPN	Hersteller	Verpackung	Verfügbarkeit	Stückpreis
PIC32MM0016GPL028-E/SS	MICROCHIP	SSOP-28-208mil	21	$ 2.9507
PIC32MM0032GPL028-I/SS	MICROCHIP	SSOP-28-208mil	9	$ 2.0519
PIC32MM0064GPL028-I/SS	MICROCHIP	SSOP-28-208mil	18	$ 5.5925
PIC32MM0032GPL028-I/ML	MICROCHIP	SSOP28-208mil	10	$ 3.3811
PIC32MM0016GPL028T-I/SS	MICROCHIP	SSOP-28-208mil	0	$ 1.5235
PIC32MM0032GPL028T-I/SS	MICROCHIP	SSOP-28	0	$ 1.6949
PIC32MM0064GPL028T-I/SS	MICROCHIP	SSOP-28-208mil	0	$ 5.0053
PIC32MM0032GPL028-E/SS	MICROCHIP	SSOP-28-208mil	0	$ 1.7858
PIC32MM0064GPL028-E/SS	MICROCHIP	SSOP-28	0	$ 1.9757