- Rozmieszczenie wyprowadzeń
- Footprint
TOSHIBA TPD4134K(Q,M)
| Producent | |
| Nr części prod. | TPD4134K(Q,M) |
| Nr LCSC | C412447 |
| Opak. | DIP-26 |
| Numer Klienta | |
| Klucz. cechy | 13.5V~16.5V DIP-26 Motor Drivers, Controllers |
| Karta Katalogowa | TOSHIBA TPD4134K(Q,M) |
Specyfikacje Produktu
| Typ | Opis | |
|---|---|---|
| Kategoria | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Producent | TOSHIBA | |
| Opak. | DIP-26 | |
| Drive Type | Three Phase | |
| Features | Interleaved conduction protection;Motor stall protection | |
| Technology | - | |
| Voltage - Supply | 13.5V~16.5V | |
| Interface | - | |
| Operating Temperature | -40℃~+135℃ | |
| Supply Current (Iq) | - | |
| Output Current | - | |
| Peak Current | - | |
| Number of Half Bridges | - | |
| RDS(on) | - |
| Typ | Opis | |
|---|---|---|
| Kategoria | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Producent | TOSHIBA | |
| Opak. | DIP-26 | |
| Drive Type | Three Phase | |
| Features | Interleaved conduction protection;Motor stall protection | |
| Technology | - | |
| Voltage - Supply | 13.5V~16.5V |
| Typ | Opis | |
|---|---|---|
| Interface | - | |
| Operating Temperature | -40℃~+135℃ | |
| Supply Current (Iq) | - | |
| Output Current | - | |
| Peak Current | - | |
| Number of Half Bridges | - | |
| RDS(on) | - |
Opis
The TPD4134K is a DC brush less motor driver using high voltage PWM control. It is fabricated by high voltage SOI process. It is three-shunt resistor circuit for current sensing. It contains level shift high-side driver, low-side driver, IGBT outputs, FRDs and protective functions for over-current circuit and under voltage protection circuits and thermal shutdown circuit. It is easy to control a DC brush less motor by just putting logic inputs from a MPU or motor controller to the TPD4134K.
Funkcje
- High voltage power side and low voltage signal side terminal are separated. It is the best for current sensing in three shunt resistance.
- Bootstrap circuit gives simple high-side supply. Bootstrap diodes are built in. A dead time can be set as a minimum of 1.4 μs, and it is suitable for a Sine-wave from drive. 3-phase bridge output using IGBTs. FRDs are built in.
- Included over-current and under-voltage protection, and thermal shutdown.
- The regulator of 7 V (typ.) is built in.
- Package: 26-pin DIP.
| Szt. | Cena jedn.(Tylko do wglądu) | Suma całkowita |
|---|---|---|
| 1+ | $ 5.72 | $ 5.72 |
| 10+ | $ 4.9935 | $ 49.94 |
| 30+ | $ 4.5625 | $ 136.88 |
| 100+ | $ 4.1253 | $ 412.53 |
| 500+ | $ 3.9237 | $ 1961.85 |
| 1,000+ | $ 3.8329 | $ 3832.90 |
Standardowa Obudowa20/Full Tube | ||
Specyfikacje Produktu
| Typ | Opis | |
|---|---|---|
| Kategoria | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Producent | TOSHIBA | |
| Opak. | DIP-26 | |
| Drive Type | Three Phase | |
| Features | Interleaved conduction protection;Motor stall protection | |
| Technology | - | |
| Voltage - Supply | 13.5V~16.5V | |
| Interface | - | |
| Operating Temperature | -40℃~+135℃ | |
| Supply Current (Iq) | - | |
| Output Current | - | |
| Peak Current | - | |
| Number of Half Bridges | - | |
| RDS(on) | - |
| Typ | Opis | |
|---|---|---|
| Kategoria | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Producent | TOSHIBA | |
| Opak. | DIP-26 | |
| Drive Type | Three Phase | |
| Features | Interleaved conduction protection;Motor stall protection | |
| Technology | - | |
| Voltage - Supply | 13.5V~16.5V |
| Typ | Opis | |
|---|---|---|
| Interface | - | |
| Operating Temperature | -40℃~+135℃ | |
| Supply Current (Iq) | - | |
| Output Current | - | |
| Peak Current | - | |
| Number of Half Bridges | - | |
| RDS(on) | - |
Opis
The TPD4134K is a DC brush less motor driver using high voltage PWM control. It is fabricated by high voltage SOI process. It is three-shunt resistor circuit for current sensing. It contains level shift high-side driver, low-side driver, IGBT outputs, FRDs and protective functions for over-current circuit and under voltage protection circuits and thermal shutdown circuit. It is easy to control a DC brush less motor by just putting logic inputs from a MPU or motor controller to the TPD4134K.
Funkcje
- High voltage power side and low voltage signal side terminal are separated. It is the best for current sensing in three shunt resistance.
- Bootstrap circuit gives simple high-side supply. Bootstrap diodes are built in. A dead time can be set as a minimum of 1.4 μs, and it is suitable for a Sine-wave from drive. 3-phase bridge output using IGBTs. FRDs are built in.
- Included over-current and under-voltage protection, and thermal shutdown.
- The regulator of 7 V (typ.) is built in.
- Package: 26-pin DIP.
C412447 Biblioteka EasyEDA
Zgodność & Kody Eksportowe
| Typ | Szczegóły |
|---|---|
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Typ | Szczegóły |
|---|---|
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC |
| Typ | Szczegóły |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |