LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
MICROCHIP MIC94082YFT-TR product image
  • MIC94082YFT-TR thumbnail 1
  • MIC94082YFT-TR thumbnail 2
  • MIC94082YFT-TR thumbnail 3
  • Pinbelegung
  • Footprint
Abbildung ähnlich

MICROCHIP MIC94082YFT-TR

Hersteller
Herst.-Teilenr.
MIC94082YFT-TR
LCSC-Nr.
C145403
Verp.
TMLF-4
Kundennummer
Hauptmerkm.
1 2A Active High High Side Switch TMLF-4 Power Distribution Switches, Load Drivers RoHS
DatenblattMICROCHIP MIC94082YFT-TR
RoHS-Konformität2 Dokumente verfügbar
Alternativteile2
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 0.5522$ 0.55
10+$ 0.4396$ 4.40
30+$ 0.3826$ 11.48
100+$ 0.327$ 32.70
500+$ 0.2931$ 146.55
1,000+$ 0.2761$ 276.10
Standardgehäuse5000/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers
HerstellerMICROCHIP
Verp.TMLF-4
Operating Temperature-40℃~+125℃
FeaturesSoft-start
number of channels1
Maximum Continuous Current2A
Control Input LogicActive High
Operating Voltage1.7V~5.5V
RDS(on)67mΩ
TypeHigh Side Switch

Beschreibung

KI-Übersetzung

The MIC94080/1/2/3/4/5 is a family of high - side load switches designed to operate from 1.7V to 5.5V input voltage. The load switch pass element is an internal 67mΩ RDSON P - Channel MOSFET which enables the device to support up to 2A of continuous current. Additionally, the load switch supports 1.5V logic level control and shutdown features in a tiny 0.85mm x 0.85mm 4 - pin Thin MLF package. The MIC94080 and MIC94081 feature rapid turn on. The MIC94082 and MIC94083 provide a slew rate controlled soft - start turn - on of 800us, while the MIC94084 and MIC94085 provide a slew rate controlled soft - start turn - on of 120us. The soft - start feature is provided to prevent an in - rush current event from pulling down the input supply voltage. The MIC94081, MIC94083, and MIC94085 feature an active load discharge circuit which switches in a 250Ω load when the switch is disabled to automatically discharge a capacitive load. An active pull - down on the enable input keeps the MIC94080/1/2/3/4/5 in a default OFF state until the enable pin is pulled above 1.25V. Internal level shift circuitry allows low voltage logic signals to switch higher supply voltages. The enable voltage can be as high as 5.5V and is not limited by the input voltage. The MIC94080/1/2/3/4/5 operating voltage range makes them ideal for Lithium ion and NiMH/NiCad/Alkaline battery powered systems, as well as non - battery powered applications. The devices provide low quiescent current and low shutdown current to maximize battery life.

Merkmale

KI-Übersetzung
  • 0.85mm x 0.85mm space saving 4-pin Thin MLF package
  • 1.7V to 5.5V input voltage range
  • 2A continuous operating current
  • 67mΩ RDSON
  • Internal level shift for CMOS/TTL control logic
  • Ultra low quiescent current
  • Micro-power shutdown current
  • Soft-Start: MIC94082/3 (800us), MIC94084/5 (120us)
  • Load discharge circuit: MIC94081, MIC94083, MIC94085
  • Ultra fast turn off time
  • Junction operating temperature from -40°C to +125°C

Anwendungen

KI-Übersetzung
  • Cellular phones
  • Portable Navigation Devices (PND)
  • Personal Media Players (PMP)
  • Ultra Mobile PCs
  • Portable instrumentation
  • Other Portable applications
  • PDAs
  • GPS Modules
  • Industrial and DataComm equipment

Alternativteile

MPNHerstellerVerpackungVerfügbarkeitStückpreis
MIC94081YFT-TRMICROCHIPUDFN-46$ 0.9207
MIC94085YFT-TRMICROCHIPTMLF-40$ 0.6596