onsemi NSBC114TDXV6T1G
| Hersteller | |
| Herst.-Teilenr. | NSBC114TDXV6T1G |
| LCSC-Nr. | C895098 |
| Verp. | SOT-563 |
| Kundennummer | |
| Hauptmerkm. | 160 500mW 100mA 50V 2 NPN (Pre-Biased) SOT-563 Bipolar Transistor Arrays, Pre-Biased RoHS |
| Datenblatt | onsemi NSBC114TDXV6T1G |
| RoHS-Konformität | 4 Dokumente verfügbar |
| Alternativteile | 2 |
Produktspezifikationen
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Discrete Semiconductors/Transistors/Bipolar (BJT)/Bipolar Transistor Arrays, Pre-Biased | |
| Hersteller | onsemi | |
| Verp. | SOT-563 | |
| Current - Collector Cutoff | 100nA | |
| Transition frequency(fT) | - | |
| Emitter-Base Voltage VEBO | - | |
| DC Current Gain | 160 | |
| Operating Temperature | - | |
| Vce Saturation(VCE(sat)) | 250mV@10mA,1.0mA | |
| Output Voltage(VO(on)) | - | |
| Input Resistor | 13kΩ | |
| Resistor Ratio | - | |
| Pd - Power Dissipation | 500mW | |
| Voltage - Input(Max)(VI(off)) | - | |
| Input Voltage (VI(on)@Ic,Vce) | - | |
| Current - Collector(Ic) | 100mA | |
| Collector - Emitter Voltage VCEO | 50V | |
| type | NPN | |
| Number | 2 NPN (Pre-Biased) |
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Discrete Semiconductors/Transistors/Bipolar (BJT)/Bipolar Transistor Arrays, Pre-Biased | |
| Hersteller | onsemi | |
| Verp. | SOT-563 | |
| Current - Collector Cutoff | 100nA | |
| Transition frequency(fT) | - | |
| Emitter-Base Voltage VEBO | - | |
| DC Current Gain | 160 | |
| Operating Temperature | - | |
| Vce Saturation(VCE(sat)) | 250mV@10mA,1.0mA | |
| Output Voltage(VO(on)) | - |
| Typ | Beschreibung | |
|---|---|---|
| Input Resistor | 13kΩ | |
| Resistor Ratio | - | |
| Pd - Power Dissipation | 500mW | |
| Voltage - Input(Max)(VI(off)) | - | |
| Input Voltage (VI(on)@Ic,Vce) | - | |
| Current - Collector(Ic) | 100mA | |
| Collector - Emitter Voltage VCEO | 50V | |
| type | NPN | |
| Number | 2 NPN (Pre-Biased) |
Beschreibung
This series of digital transistors is designed to replace discrete devices and their external resistor bias networks. The Bias Resistor Transistor (BRT) contains a single transistor with a monolithic bias network consisting of two resistors — a series base resistor and a base-emitter resistor. The BRT eliminates these discrete components by integrating them into a single device. Using BRTs reduces system cost and board space.
Merkmale
- Simplified circuit design
- Reduced board space
- Reduced component count
- S and NSV prefixes for automotive and other applications with unique source and change control requirements; AEC-Q101 qualified with PPAP capability
- Lead-free, halogen-free/BFR-free, and RoHS compliant
| Stk. | E-Preis(Nur als Referenz) | Gesamtbetrag |
|---|---|---|
| 1+ | $ 0.111 | $ 0.11 |
| 200+ | $ 0.043 | $ 8.60 |
| 500+ | $ 0.0415 | $ 20.75 |
| 1,000+ | $ 0.0407 | $ 40.70 |
Standardgehäuse4000/Full Reel | ||
Produktspezifikationen
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Discrete Semiconductors/Transistors/Bipolar (BJT)/Bipolar Transistor Arrays, Pre-Biased | |
| Hersteller | onsemi | |
| Verp. | SOT-563 | |
| Current - Collector Cutoff | 100nA | |
| Transition frequency(fT) | - | |
| Emitter-Base Voltage VEBO | - | |
| DC Current Gain | 160 | |
| Operating Temperature | - | |
| Vce Saturation(VCE(sat)) | 250mV@10mA,1.0mA | |
| Output Voltage(VO(on)) | - | |
| Input Resistor | 13kΩ | |
| Resistor Ratio | - | |
| Pd - Power Dissipation | 500mW | |
| Voltage - Input(Max)(VI(off)) | - | |
| Input Voltage (VI(on)@Ic,Vce) | - | |
| Current - Collector(Ic) | 100mA | |
| Collector - Emitter Voltage VCEO | 50V | |
| type | NPN | |
| Number | 2 NPN (Pre-Biased) |
| Typ | Beschreibung | |
|---|---|---|
| Kategorie | Discrete Semiconductors/Transistors/Bipolar (BJT)/Bipolar Transistor Arrays, Pre-Biased | |
| Hersteller | onsemi | |
| Verp. | SOT-563 | |
| Current - Collector Cutoff | 100nA | |
| Transition frequency(fT) | - | |
| Emitter-Base Voltage VEBO | - | |
| DC Current Gain | 160 | |
| Operating Temperature | - | |
| Vce Saturation(VCE(sat)) | 250mV@10mA,1.0mA | |
| Output Voltage(VO(on)) | - |
| Typ | Beschreibung | |
|---|---|---|
| Input Resistor | 13kΩ | |
| Resistor Ratio | - | |
| Pd - Power Dissipation | 500mW | |
| Voltage - Input(Max)(VI(off)) | - | |
| Input Voltage (VI(on)@Ic,Vce) | - | |
| Current - Collector(Ic) | 100mA | |
| Collector - Emitter Voltage VCEO | 50V | |
| type | NPN | |
| Number | 2 NPN (Pre-Biased) |
Beschreibung
This series of digital transistors is designed to replace discrete devices and their external resistor bias networks. The Bias Resistor Transistor (BRT) contains a single transistor with a monolithic bias network consisting of two resistors — a series base resistor and a base-emitter resistor. The BRT eliminates these discrete components by integrating them into a single device. Using BRTs reduces system cost and board space.
Merkmale
- Simplified circuit design
- Reduced board space
- Reduced component count
- S and NSV prefixes for automotive and other applications with unique source and change control requirements; AEC-Q101 qualified with PPAP capability
- Lead-free, halogen-free/BFR-free, and RoHS compliant
C895098 EasyEDA-Bibliothek
Compliance & Exportcodes
| Typ | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8541600000 |
| USHTS | 8541600080 |
| TARIC | 8541600000 |
| CAHTS | 8541600010 |
| BRHTS | 85416010 |
| INHTS | 85416000 |
| MXHTS | 8541.60.01 |
| Typ | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8541600000 |
| USHTS | 8541600080 |
| TARIC | 8541600000 |
| Typ | Details |
|---|---|
| CAHTS | 8541600010 |
| BRHTS | 85416010 |
| INHTS | 85416000 |
| MXHTS | 8541.60.01 |
Alternativteile
| MPN | Hersteller | Verpackung | Verfügbarkeit | Stückpreis | ||
|---|---|---|---|---|---|---|
| DDC114TH-7 | DIODES | SOT-563 | 20 | $ 0.0947 | ||
| PEMH11,115 | Nexperia | SOT-666 | 0 | $ 0.0579 |

