LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
TOREX XCL207B183CR-G product image
Immagini a scopo illustrativo

TOREX XCL207B183CR-G

Produttore
Cod. Prod.
XCL207B183CR-G
Cod. LCSC
C7416807
Imballo
TDFN-6-EP(2x2.5)
Numero Cliente
Attr. chiave
Step-down type 2V~6V TDFN-6-EP(2x2.5) DC DC Converters RoHS
Scheda TecnicaTOREX XCL207B183CR-G
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 3.1218$ 3.12
200+$ 1.2457$ 249.14
500+$ 1.2048$ 602.40
1,000+$ 1.1836$ 1183.60
Package Standard3000/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaPower Supplies/Power Suppliers - Board Mount/DC DC Converters
ProduttoreTOREX
ImballoTDFN-6-EP(2x2.5)
Synchronous RectifierYes
Number of Outputs1
FunctionStep-down type
Iout-
TopologyBuck
Operating Temperature-40℃~+85℃
Frequency - Switching3MHz
FeaturesOvercurrent Protection;Protection latch;Output discharge;Light load efficient mode
Voltage - Supply2V~6V
Quiescent Current-

Descrizione

Traduzione AI

The XCL205/XCL206/XCL207 series is a synchronous step-down micro DC/DC converter which integrates an inductor and a control IC in one tiny package (2.5mm × 2.0mm, h = 1.0mm). A stable power supply with an output current of 600mA is configured using only two capacitors connected externally. Operating voltage range is from 2.0V to 6.0V (XCL20×G: 1.8V ~ 6.0V). Output voltage is internally set in a range from 0.8V to 4.0V in increments of 0.05V. The device is operated by 3.0MHz, and includes 0.42Ω P-channel driver transistor and 0.52Ω N-channel switching transistor. As for operation mode, the XCL205 series is PWM control, the XCL206 series is automatic PWM/PFM switching control and the XCL207 series can be manually switched between the PWM control mode and the automatic PWM/PFM switching control mode, allowing fast response, low ripple and high efficiency over the full range of loads (from light load to heavy load). During stand-by, the device is shutdown to reduce current consumption to as low as 1.0μA or less. With the built-in UVLO (Under Voltage Lock Out) function, the internal driver transistor is forced OFF when input voltage becomes 1.4V or lower. XCL205B (G, F)/XCL206B (G, F)/XCL207B (G, F) series provide short-time turn-on by the soft start function internally set in 0.25ms. XCL205B(C,G,F) /XCL206 B(C,G,F) / XCL207B(C,G,F) integrate CL auto discharge function which enables the electric charge stored at the output capacitor CL to be discharged via the internal auto-discharge switch located between the Lx and VSS pins. When the devices enter stand-by mode, output voltage quickly returns to the VSS level as a result of this function.

Caratteristiche

Traduzione AI
  • Ultra-Small: 2.5mm × 2.0mm, h = 1.0mm
  • Input Voltage: 2.0V ~ 6.0V (A/B/C Type), 1.8V ~ 6.0V (G/F Type)
  • Output Voltage: 0.8V ~ 4.0V (±2.0%)
  • High Efficiency: 90% (VIN = 4.2V, Vout = 3.3V)
  • Output Current: 600mA
  • Oscillation Frequency: 3.0MHz (±15%)
  • Maximum Duty Cycle: 100%
  • Capacitor: Low ESR Ceramic
  • CE Function: Active High
  • Soft-Start Circuit Built-In
  • CL High Speed Auto Discharge
  • Current Limiter Circuit Built-In (Constant Current & Latching)
  • Operation Mode: PWM (XCL205), PWM/PFM Auto (XCL206), PWM/PFM Manual (XCL207)
  • Operating Ambient Temperature: -40℃ ~ 85℃
  • Environmentally Friendly: EU RoHS Compliant, Pb Free

Applicazioni

Traduzione AI
  • Mobile phones, Smart phones
  • Bluetooth Headsets
  • WiMAX PDAs, MIDs, UMPCs
  • Portable game consoles
  • Digital cameras, Camcorders
  • Electronic dictionaries