LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Intel/Altera JS28F640P30T85A product image
Abbildung ähnlich

Intel/Altera JS28F640P30T85A

Hersteller
Herst.-Teilenr.
JS28F640P30T85A
LCSC-Nr.
C6973357
Verp.
TFSOP-56-18.4mm
Kundennummer
Hauptmerkm.
64Mbit 1.7V~2V 52MHz Parallel TFSOP-56-18.4mm Memory
DatenblattIntel/Altera JS28F640P30T85A
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 3.0263$ 3.03
200+$ 1.2078$ 241.56
576+$ 1.1669$ 672.13
1,152+$ 1.1472$ 1321.57
Standardgehäuse576/Full Tray
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Memory/Memory
HerstellerIntel/Altera
Verp.TFSOP-56-18.4mm
Operating Temperature-40℃~+85℃
FeaturesPower-on reset;Hardware write protection;Software write protection;Absolute write protection;Power lock protection
Memory Size64Mbit
Voltage - Supply1.7V~2V
Program / Erase Cycles100,000 cycles
Clock Frequency52MHz
Data Retention - TDR (Year)10 years
Block Erase Time(tBE)-
Write Cycle Time(tWC)-
Page Programming Time (Tpp)6us
InterfaceParallel
Standby Supply Current20uA

Beschreibung

KI-Übersetzung

Numonyx StrataFlash Embedded Memory (P30) is the latest generation of Numonyx StrataFlash memory devices. Offering densities from 64-Mbit to 512-Mbit, P30 devices bring proven two-bits-per-cell storage technology to the embedded flash memory market segment. Benefits include higher density in a smaller footprint, high-speed interface, lowest cost-per-bit NOR devices, and support for both code and data storage. Features include high-performance synchronous burst read mode, fast asynchronous access time, low power consumption, flexible security options, and three industry-standard package options. The P30 product family is manufactured using Intel 130 nm ETOX VIII process technology. The P30 product family is also planned for Intel 65nm process photolithography. Changes to 65nm AC timing are documented in this datasheet and should be considered for all new designs.

Merkmale

KI-Übersetzung
  • High performance
    • 85 ns initial access
      • 52 MHz with zero wait states
    • 17ns clock-to-data output synchronous-burst read mode
    • 25 ns asynchronous-page read mode
    • 4-, 8-, 16-, and continuous-word burst mode
    • Buffered Enhanced Factory Programming (BEFP) at 5 μs/byte (Typ)
    • 1.8 V buffered programming at 7 μs/byte (Typ)
  • Architecture
    • Multi-Level Cell Technology: Highest Density at Lowest Cost
    • Asymmetrically-blocked architecture
    • Four 32-KByte parameter blocks: top or bottom configuration
    • 128-KByte main blocks
  • Voltage and Power
    • VCC (core) voltage: 1.7 V - 2.0 V
    • VCCQ (I/O) voltage: 1.7 V - 3.6 V
    • Standby current: 20 μA (Typ) for 64-Mbit
    • 4-Word synchronous read current: 13 mA (Typ) at 40 MHz
  • Quality and Reliability
    • Operating temperature: -40 ℃ to +85 ℃
    • Minimum 100,000 erase cycles per block
    • ETOX VIII process technology
  • Security
    • One-Time Programmable Registers:
      • 64 unique factory device identifier bits
      • 2112 user-programmable OTP bits
    • Selectable OTP Space in Main Array:
      • Four pre-defined 128-KByte blocks (top or bottom configuration)
      • Up to Full Array OTP Lockout
    • Absolute write protection: VPP = VSS
    • Power-transition erase/program lockout
    • Individual zero-latency block locking
    • Individual block lock-down
  • Software
    • 20 μs (Typ) program suspend
    • 20 μs (Typ) erase suspend
    • Numonyx Flash Data Integrator optimized
    • Basic Command Set and Extended Command Set compatible
    • Common Flash Interface capable
  • Density and Packaging
    • 56- Lead TSOP package (64, 128, 256, 512- Mbit)
    • 64- Ball Numonyx Easy BGA package (64, 128, 256, 512- Mbit)
    • Numonyx QUAD + SCSP (64, 128, 256, 512- Mbit)
    • 16-bit wide data bus