LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
ADI LTC6655CHMS8-2.5#PBF product image
  • LTC6655CHMS8-2.5#PBF thumbnail 1
  • LTC6655CHMS8-2.5#PBF thumbnail 2
  • LTC6655CHMS8-2.5#PBF thumbnail 3
  • Pinbelegung
  • Footprint
Abbildung ähnlich

ADI LTC6655CHMS8-2.5#PBF

Hersteller
Herst.-Teilenr.
LTC6655CHMS8-2.5#PBF
LCSC-Nr.
C689441
Verp.
MSOP-8
Kundennummer
Hauptmerkm.
Low Noise, Low Drift Precision References
DatenblattADI LTC6655CHMS8-2.5#PBF
RoHS-Konformität1 Dokumente verfügbar
Alternativteile10
Vorrätig: 52
52 Ab Lager, sofort versandfertig
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-PreisGesamtbetrag
1+$ 14.8575$ 14.86
10+$ 13.0236$ 130.24
30+$ 11.906$ 357.18
100+$ 10.9686$ 1096.86
Standardgehäuse50/Full Tube
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Reference
HerstellerADI
Verp.MSOP-8
Output Voltage2.5V
Quiescent Current7.5mA
Tolerance±0.05%
Voltage - Supply3V~13.2V
Reference TypeSeries
Noise - 1/10Hz to 10Hz0.625uVp-p
Output Current5mA
Operating Temperature-40℃~+125℃
FeaturesEnable/disable
Output TypeFixed

Beschreibung

KI-Übersetzung

The LTC6655 is a complete family of precision bandgap voltage references, offering exceptional noise and drift performance. This low noise and drift is ideally suited for the high resolution measurements required by instrumentation and test equipment. In addition, the LTC6655 is fully specified over the temperature range of -40°C to 125°C, ensuring its suitability for demanding automotive and industrial applications. Advanced curvature compensation allows this bandgap reference to achieve a drift of less than 2ppm/°C with a predictable temperature characteristic and an output voltage accurate to ±0.025%, reducing or eliminating the need for calibration. The LTC6655LN Low Noise comes with a noise reduction pin that enables reduction of wideband noise with the addition of a single capacitor. The LTC6655 can be powered from as little as 500mV above the output voltage to as much as 13.2V. Superior load regulation with source and sink capability, coupled with exceptional line rejection, ensures consistent performance over a wide range of operating conditions. A shutdown mode is provided for low power applications. The LTC6655 references are offered in an 8-lead MSOP package and an 8-lead LS8 package. The LS8 is a 5mm × 5mm surface mount hermetic package that provides outstanding stability.

Merkmale

KI-Übersetzung
  • Low Noise: 0.25ppmₚ₋ₚ (0.1Hz to 10Hz), 625μVₚ₋ₚ for the LTC6655-2.5, 0.21ppm RMS (10Hz to 1kHz) for the LTC6655LN, G_NR = 100μF
  • Low Drift: 2ppm/℃ Max
  • High Accuracy: ±0.025% Max
  • No Humidity Sensitivity (LS8 Package)
  • Thermal Hysteresis (LS8): 30ppm (-40℃ to 85℃)
  • Long-Term Drift (LS8): 20ppm/√kHr
  • 100% Tested at -40℃, 25℃ and 125℃
  • Load Regulation: <10ppm/mA
  • Sinks and Sources Current: ±5mA
  • Low Dropout: 500mV
  • Maximum Supply Voltage: 13.2V
  • Low Power Shutdown: <20μA Max
  • Available Output Voltages: 1.25V, 2.048V, 2.5V, 3V, 3.3V, 4.096V, 5V
  • Available in an 8-Lead MSOP and High Stability Hermetic 5mm x 5mm LS8 Packages

Anwendungen

KI-Übersetzung
  • Instrumentation and Test Equipment
  • High Resolution Data Acquisition Systems
  • Weigh Scales
  • Precision Battery Monitors
  • Precision Regulators
  • Medical Equipment

Alternativteile

MPNHerstellerVerpackungVerfügbarkeitStückpreis
LTC6652AHMS8-2.5#PBFADIMSOP-811$ 23.6136
LTC6655CHMS8-2.5#TRPBFADIMSOP-81$ 8.7143
ZJR1004-9BUAERZJWMSOP-882$ 5.9784
LHR3025AFMALegendsemiMSOP-8459$ 4.407
ZJR1000-9AUABRZJWMSOP-888$ 2.5
LTC6655BHMS8-2.5#PBFADIMSOP-8179$ 16.5258
LTC6655BHMS8-2.5#TRPBFADIMSOP-832$ 20.2688
LTC6655LNCHMS8-2.5#PBFADIMSOP-80$ 15.5753
LTC6655LNCHMS8-2.5#TRPBFADIMSOP-80$ 14.1566
LTC6652AHMS8-2.5#TRPBFADIMSOP-80$ 6.4795