LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
ADI LT6210IS6#TRMPBF product image
Abbildung ähnlich

ADI LT6210IS6#TRMPBF

Hersteller
ADI
Herst.-Teilenr.
LT6210IS6#TRMPBF
LCSC-Nr.
C672987
Verp.
TSOT-23-6
Kundennummer
Hauptmerkm.
1 6mV 700V/us 50dB 9uA TSOT-23-6 Instrumentation, Op Amps, Buffer Amps RoHS
DatenblattADI LT6210IS6#TRMPBF
RoHS-Konformität1 Dokumente verfügbar
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 2.7644$ 2.76
200+$ 1.0712$ 214.24
500+$ 1.0326$ 516.30
1,000+$ 1.0141$ 1014.10
Standardgehäuse500/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps
HerstellerADI
Verp.TSOT-23-6
Output Current-
Number of Channels1
Vos - Input Offset Voltage6mV
Slew Rate700V/us
Input Offset Current(Ios)-
Operating Temperature-40℃~+85℃
Common Mode Rejection Ratio(CMRR)50dB
Ib - Input Bias Current9uA
Input Offset Voltage Drift(Vos TC)2mV/℃
Quiescent Current-
Gain Bandwidth Product-
FeaturesESD protection
Input Voltage Noise Density6.5nV/√Hz@1kHz
Dual Supply1.5V~6V;-6V~-1.5V
Rail to Rail-
Single Supply3V~12V
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Beschreibung

KI-Übersetzung

The LT6210/LT6211 are single/dual current feedback amplifiers with externally programmable supply current and bandwidth ranging from 10MHz at 300µA per amplifier to 200MHz at 6mA per amplifier. They feature a low distortion rail-to-rail output stage, 700V/µs slew rate and a minimum output current drive of 75mA. The LT6210/LT6211 operate on supplies as low as a single 3V and up to either 12V or ±6V. The ISET pin allows for the optimization of quiescent current for specific bandwidth, distortion or slew rate requirements. Regardless of supply voltage, the supply current is programmable from just 300µA to 6mA per amplifier with an external resistor or current source. The LT6210 is available in the low profile (1mm) 6-lead TSOT-23 package. The LT6211 is available in the 10-lead MSOP and the 3mm×3mm×0.8mm DFN packages.

Merkmale

KI-Übersetzung
  • Programmable Supply Current and Bandwidth: 10MHz at 300µA per Amplifier up to 200MHz at 6mA per Amplifier
  • Rail-to-Rail Output: 0.05V to 2.85V on 3V Single Supply
  • High Slew Rate: 700V/µs
  • High Output Drive: ±75mA Minimum Output Current
  • C-Load™ Op Amp Drives All Capacitive Loads
  • Low Distortion: –70dB HD2 at 1MHz 2VP-P, –75dB HD3 at 1MHz 2VP-P
  • Fast Settling: 20ns 0.1% Settling for 2V Step
  • Excellent Video Performance Into 150Ω Load: Differential Gain of 0.20%, Differential Phase of 0.10°
  • Wide Supply Range: 3V to 12V Single Supply, ±1.5V to ±6V Dual Supplies
  • Small Size: Low Profile (1mm) 6-Lead ThinSOT, 3mm×3mm×0.8mm DFN and 10-Lead MSOP Packages

Anwendungen

KI-Übersetzung
  • Buffers
  • Video Amplifers
  • Cable Drivers
  • Mobile Communication
  • Low Power/Battery Applications