LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
MICROCHIP MCP4261-104E/P product image
  • MCP4261-104E/P thumbnail 1
  • MCP4261-104E/P thumbnail 2
  • MCP4261-104E/P thumbnail 3
  • Pinout
  • Footprint
Immagini a scopo illustrativo

MICROCHIP MCP4261-104E/P

Produttore
MICROCHIP
Cod. Prod.
MCP4261-104E/P
Cod. LCSC
C645757
Imballo
PDIP-14
Numero Cliente
Attr. chiave
7/8-Bit Single/Dual SPI Digital POT with Non-Volatile Memory
Scheda TecnicaMICROCHIP MCP4261-104E/P
Conformità RoHS1 documenti disponibili
Disponibile: 15
15 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.Importo totale
1+$ 3.3756$ 3.38
10+$ 2.9036$ 29.04
30+$ 2.5178$ 75.53
100+$ 2.2347$ 223.47
500+$ 2.1044$ 1052.20
1,000+$ 2.0459$ 2045.90
Package Standard30/Full Tube
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Data Acquisition/Digital Potentiometers
ProduttoreMICROCHIP
ImballoPDIP-14
Voltage - Supply2.7V~5.5V
Resistance value changeLinear
Memory TypeEEPROM
Number of Taps257
Tolerance±20%
InterfaceSPI
Temperature Coefficient(Typ)50ppm/℃
FeaturesNon-volatile storage;Slide lock;Power-on reset
Operating Temperature-40℃~+125℃
Resistance Value (Ohms)100kΩ
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

The MCP41XX and MCP42XX devices offer a wide range of product offerings using an SPl interface. WiperLock Technology allows application-specific calibration settings to be secured in the EEPROM.

Caratteristiche

Traduzione AI
  • Single or Dual Resistor Network options
  • Potentiometer or Rheostat configuration options
  • Resistor Network Resolution - 7-bit: 128 Resistors (129 Steps) - 8-bit: 256 Resistors (257 Steps)
  • RAB Resistances options of: 5kΩ, 10kΩ, 50kΩ, 100kΩ
  • Zero-Scale to Full-Scale Wiper operation
  • Low Wiper Resistance: 75Ω (typical)
  • Low Tempco:
    • Absolute (Rheostat): 50 ppm typical Δ°C to 70°C
    • Ratiometric (Potentiometer): 15 ppm typical
  • Non-volatile Memory
    • Automatic Recall of Saved Wiper Setting
    • WiperLock Technology
  • SPI serial interface (10 MHz, modes 0,0 & 1,1)
    • High-Speed Read/Writes to wiper registers
    • Read/Write to Data EEPROM registers
    • Serially enabled EEPROM write protect
    • SDI/SDO multiplexing (MCP41X1 only)
  • Resistor Network Terminal Disconnect Feature via:
    • Shutdown pin (SHDN)
    • Terminal Control (TCON) Register
  • Write Protect Feature:
    • Hardware Write Protect (WP) Control pin
    • Software Write Protect (WP) Configuration bit
  • Brown-out reset protection (1.5V typical)
  • Serial Interface Inactive current (2.5 μA typical)
  • High-Voltage Tolerant Digital Inputs: Up to 12.5V
  • Supports Split Rail Applications
  • Internal weak pull-up on all digital inputs
  • Wide Operating Voltage:
    • 2.7V to 5.5V - Device Characteristics Specified
    • 1.8V to 5.5V - Device Operation
  • Wide Bandwidth (-3dB) Operation: 2 MHz (typical) for 5.0kΩ device
  • Extended temperature range (-40°C to +125°C)