LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
MICROCHIP MCP8024-H/PT product image
Abbildung ähnlich

MICROCHIP MCP8024-H/PT

Hersteller
MICROCHIP
Herst.-Teilenr.
MCP8024-H/PT
LCSC-Nr.
C633719
Verp.
TQFP-48-EP(7x7)
Kundennummer
Hauptmerkm.
6V~28V TQFP-48-EP(7x7) Motor Drivers, Controllers RoHS
DatenblattMICROCHIP MCP8024-H/PT
RoHS-Konformität2 Dokumente verfügbar
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 3.0314$ 3.03
250+$ 1.1731$ 293.28
500+$ 1.133$ 566.50
1,000+$ 1.1129$ 1112.90
Standardgehäuse250/Full Tray
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers
HerstellerMICROCHIP
Verp.TQFP-48-EP(7x7)
Drive TypeThree Phase
FeaturesInterleaved conduction protection
TechnologyNo
Voltage - Supply6V~28V
Interface-
Operating Temperature-40℃~+150℃
Supply Current (Iq)-
Output Current500mA
Number of Half Bridges3
Peak Current2.5A
RDS(on)17Ω
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Beschreibung

KI-Übersetzung

The MCP8024 is a 3-Phase Brushless DC (BLDC) power module. The MCP8024 device integrates three half-bridge drivers to drive external NMOS/NMOS transistor pairs configured to drive a 3-phase BLDC motor, a comparator, a voltage regulator to provide bias to a companion microcontroller, power monitoring comparators, an overtemperature sensor, two level translators and three operational amplifiers for motor current monitoring. The MCP8024 has three half-bridge drivers capable of delivering a peak output current of 0.5A at 12V for driving high-side and low-side NMOS MOSFET transistors. The drivers have shoot-through, overcurrent, and short-circuit protection. The MCP8024 buck converter is capable of delivering 750 mW of power for powering a companion microcontroller. The buck regulator may be disabled if not used. The on-board 5V and 12V low dropout voltage regulators are capable of delivering 20 mA of current. The MCP8024 operation is specified over a temperature range of -40°C to +150°C. Package options include the 40-lead 5x5 QFN and 48-lead 7x7 TQFP.

Merkmale

KI-Übersetzung
  • Three Half-bridge Drivers Configured to Drive External High-Side NMOS and Low-Side NMOS MOSFETs
  • Independent input control for high-side NMOS and low-side NMOS MOSFETs
  • Peak output current: 0.5A @ 12V
  • Shoot-through protection
  • Overcurrent and short circuit protection
  • Adjustable Output Buck Regulator (750 mW)
  • Fixed Output Linear Regulators: 5V @ 20 mA, 12V @ 20 mA
  • Internal Bandgap Reference
  • Three Operational Amplifiers for Motor Phase Current Monitoring and Position Detection
  • Overcurrent Comparator
  • Two Level Translators
  • Operational Voltage Range 6 - 40V
  • Undervoltage Lockout (UVLO): 6V
  • Overvoltage Lockout (OVLO): 28V
  • Transient (100 ms) Voltage Tolerance: 48V
  • Extended Temperature Range: TA -40 to +150°C
  • Thermal Shutdown

Anwendungen

KI-Übersetzung
  • Automotive Fuel, Water, Ventilation Motors
  • Home Appliances
  • Permanent Magnet Synchronous Motor (PMSM) Control
  • Hobby Aircraft, Boats, Vehicles