LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Nexperia 74HC137DB,112 product image
Abbildung ähnlich

Nexperia 74HC137DB,112

Hersteller
Herst.-Teilenr.
74HC137DB,112
LCSC-Nr.
C546567
Verp.
SSOP-16-208mil
Kundennummer
Hauptmerkm.
2V~6V 17ns@6V,50pF SSOP-16-208mil Signal Switches, Multiplexers, Decoders
DatenblattNexperia 74HC137DB,112
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 0.234$ 0.23
10+$ 0.1847$ 1.85
30+$ 0.1636$ 4.91
100+$ 0.1373$ 13.73
500+$ 0.1256$ 62.80
1,092+$ 0.1186$ 129.51
Standardgehäuse1092/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Logic/Signal Switches, Multiplexers, Decoders
HerstellerNexperia
Verp.SSOP-16-208mil
TypeDecoder
Series74HC
Number of Channels-
Voltage - Supply2V~6V
Operating Temperature-40℃~+125℃
Quiescent Current-
Current - Output High(IOH)25mA
Propagation Delay17ns@6V,50pF
Function-
Current - Output Low(IOL)25mA

Beschreibung

KI-Übersetzung

The 74HC137 is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). The 74HC137 is specified in compliance with JEDEC standard no.7A. The 74HC137 is a 3-to-8 line decoder, demultiplexer with latches at the three address inputs (An). The 74HC137 essentially combines the 3-to-8 decoder function with a 3-bit storage latch. When the latch is enabled (LE (overline) = LOW), the 74HC137 acts as a 3-to-8 active LOW decoder. When the latch enable (LE (overline)) goes from LOW-to-HIGH, the last data present at the inputs before this transition, is stored in the latches. Further address changes are ignored as long as LE remains HIGH. The output enable input (E1 and E2) controls the state of the outputs independent of the address inputs or latch operation. All outputs are HIGH unless E1 is LOW and E2 is HIGH. The 74HC137 is ideally suited for implementing non-overlapping decoders in 3-state systems and strobed (stored address) applications in bus oriented systems.

Merkmale

KI-Übersetzung
  • Combines 3-to-8 decoder with 3-bit latch
  • Multiple input enable for easy expansion or independent controls
  • Active LOw mutually exclusive outputs
  • Low-power dissipation
  • Complies with JEDEC standard no. 7A
  • ESD protection:
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200V
  • Specified from -40 ℃ to +80 ℃ and from -40 ℃ to +125 ℃

Anwendungen

KI-Übersetzung
  • Three-state systems
  • Storage address applications (with strobe in bus-oriented systems)