LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
AWINIC(Shanghai Awinic Tech) AW36518FCR product image
  • AW36518FCR thumbnail 1
  • AW36518FCR thumbnail 2
  • AW36518FCR thumbnail 3
  • Pinout
  • Footprint
Immagini a scopo illustrativo

AWINIC(Shanghai Awinic Tech) AW36518FCR

Produttore
AWINIC(Shanghai Awinic Tech)Asian Brands
Cod. Prod.
AW36518FCR
Cod. LCSC
C506188
Imballo
FCQFN-10(1.2x1.6)
Numero Cliente
Attr. chiave
High Efficiency, Independent 1.5A Flash LED Driver
Scheda TecnicaAWINIC(Shanghai Awinic Tech) AW36518FCR
Conformità RoHS1 documenti disponibili
Disponibile: 75
75 Pronta consegna
Minimo: 5Multiplo: 5Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.Importo totale
5+$ 0.3924$ 1.96
50+$ 0.3028$ 15.14
150+$ 0.2644$ 39.66
500+$ 0.2165$ 108.25
3,000+$ 0.1951$ 585.30
6,000+$ 0.1823$ 1093.80
Package Standard3000/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/LED Drivers ICs
ProduttoreAWINIC(Shanghai Awinic Tech)
ImballoFCQFN-10(1.2x1.6)
Output Voltage-
FeaturesOver Voltage Protection;Built-in soft-start;Short Circuit Protection;Over-Temperature Protection (OTP)
Frequency - Switching2MHz~4MHz
Switch Tube (Built-In/External)Built-in
Voltage - Input(AC)-
Operating temperature-40℃~+85℃
Number of Channels1
TopologyBoost
TypeDC-DC
Output Current1.5A
Constant Current Accuracy7%
Voltage - Input(DC)2.7V~5.5V
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

The AW36518 is a LED flash driver that provides a high level of adjustability within a small solution size. The AW36518 utilizes a 2MHz or 4MHz fixed-frequency synchronous boost converter to provide power to the 1.5A constant current LED sources. The 256 levels current sources provide the flexibility to adjust the current of LED in Flash/Torch/IR modes. The AW36518 provides IVFM protection to prevent system reset or shutdown under low battery condition. The AW36518 are controlled via an I2C compatible interface. The main features of the AW36518 include: flash/torch current, flash timeout duration, IVFM and TX interrupt. The AW36518 also provides hardware flash/torch pin (STROBE/TORCH) to control Flash/Torch events. The 2MHz or 4MHz switching frequency options, overvoltage protection (OVP), and adjustable current limit allow for the use of tiny, low-profile inductors and 10μF ceramic capacitors. The device operates over a -40°C to +85°C ambient temperature range. The AW36518 is available in small 0.4mm pitch FCQFN 1.6mm×1.2mm -10L package.

Caratteristiche

Traduzione AI
  • 1.5A Accurate and Programmable LED Current Source
  • Flash: 2.94mA~1.5A, 256 levels 5.88mA/level Torch: 0.75mA~386mA, 256 levels 1.51mA/level
  • Flash Timeout: 40ms~1.6s, 16 levels
  • V Flash/Torch/IR Mode
  • Up to 85% Flash Efficiency
  • Optimized Flash LED Current During Low Battery Conditions (IVFM)
  • Hardware Flash/Torch Enable (STROBE/TORCH)
  • Synchronization Input for RF Power Amplifier Pulse Events (TX)
  • 400kHz I2C: AW36518 (I2C Address=0x63)
  • 0.4mm Pitch, FCQFN-10L Package
  • Compatible with AW3648

Applicazioni

Traduzione AI
  • Smartphone Camera Flash