LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
IKSEMICON IL2576-ADJD2T-P product image
  • IL2576-ADJD2T-P thumbnail 1
  • IL2576-ADJD2T-P thumbnail 2
  • IL2576-ADJD2T-P thumbnail 3
  • Pinout
  • Footprint
Immagini a scopo illustrativo

IKSEMICON IL2576-ADJD2T-P

Produttore
Cod. Prod.
IL2576-ADJD2T-P
Cod. LCSC
C412332
Imballo
TO-263-5
Numero Cliente
Attr. chiave
3.0 A, 15 V, Step-Down Switching Regulator
Scheda TecnicaIKSEMICON IL2576-ADJD2T-P
Parti alternative2
Disponibile: 639
639 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.Importo totale
1+$ 0.8695$ 0.87
10+$ 0.7154$ 7.15
30+$ 0.6392$ 19.18
100+$ 0.5613$ 56.13
500+$ 0.464$ 232.00
800+$ 0.4396$ 351.68
Package Standard800/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
ProduttoreIKSEMICON
ImballoTO-263-5
Operating Temperature-40℃~+125℃
Frequency - Switching52kHz
Number of Outputs1
FunctionStep-down type
FeaturesCycle-by-cycle current limiting;Overcurrent Protection
TopologyBuck
Output TypeAdjustable
Operating Voltage4V~40V
Switch tube (built-in/external)Built-in
Output Voltage1.217V~1.243V
Output Current3A
Quiescent Current10mA

Descrizione

Traduzione AI

The IL2576 series of regulators are monolithic integrated circuits ideally suited for easy and convenient design of a step–down switching regulator (buck converter). All circuits of this series are capable of driving a 3.0 A load with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5.0 V, 12 V, 15 V, and an adjustable output version. These regulators were designed to minimize the number of external components to simplify the power supply design. Standard series of inductors optimized for use with the IL2576 are offered by several different inductor manufacturers. Since the IL2576 converter is a switch–mode power supply, its efficiency is significantly higher in comparison with popular three–terminal linear regulators, especially with higher input voltages. In many cases, the power dissipated is so low that no heatsink is required or its size could be reduced dramatically. A standard series of inductors optimized for use with the IL2576 are available from several different manufacturers. This feature greatly simplifies the design of switch–mode power supplies. The IL2576 features include a guaranteed ±4% tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency (±2% over 0°C to 125°C). External shutdown is included, featuring 80 μA (typical) standby current. The output switch includes cycle–by–cycle current limiting, as well as thermal shutdown for full protection under fault conditions.

Caratteristiche

Traduzione AI
  • 3.3 V, 5.0 V, 12 V, 15 V, and Adjustable Output Versions
  • Adjustable Version Output Voltage Range, 1.23 to 37 V ±4% Maximum Over Line and Load Conditions
  • Guaranteed 3.0 A Output Current
  • Wide Input Voltage Range
  • Requires Only 4 External Components
  • 52 kHz Fixed Frequency Internal Oscillator
  • TTL Shutdown Capability, Low Power Standby Mode
  • High Efficiency
  • Uses Readily Available Standard Inductors
  • Thermal Shutdown and Current Limit Protection

Applicazioni

Traduzione AI
  • Simple High–Efficiency Step–Down (Buck) Regulator
  • Efficient Pre–Regulator for Linear Regulators
  • On–Card Switching Regulators
  • Positive to Negative Converter (Buck–Boost)
  • Negative Step–Up Converters
  • Power Supply for Battery Chargers

Parti alternative

MPNProduttoreImballaggioDisponibilitàPrezzo unitario
LM2576S-ADJ/TRMinosTO-263-5L925$ 0.3055
LM2576S-ADJHXY MOSFETTO-263-5L901$0.7526 $0.7922