LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
MXIC MX29F400CTTI-70G product image
Immagini a scopo illustrativo

MXIC MX29F400CTTI-70G

Produttore
MXIC
Cod. Prod.
MX29F400CTTI-70G
Cod. LCSC
C2803071
Imballo
TFSOP-48-18.4mm
Numero Cliente
Attr. chiave
4Mbit 4.5V~5.5V 5MHz Parallel TFSOP-48-18.4mm Memory RoHS
Scheda TecnicaMXIC MX29F400CTTI-70G
Parti alternative2
Disponibile: 10
10 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.Importo totale
1+$ 11.1698$ 11.17
10+$ 9.9095$ 99.10
30+$ 9.1422$ 274.27
100+$ 8.4974$ 849.74
Package Standard5/Full Tray
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Memory/Memory
ProduttoreMXIC
ImballoTFSOP-48-18.4mm
Operating Temperature-40℃~+85℃
Features-
Memory Size4Mbit
Voltage - Supply4.5V~5.5V
Program / Erase Cycles100,000 cycles
Clock Frequency5MHz
Data Retention - TDR (Year)20 Years
Block Erase Time(tBE)-
Write Cycle Time(tWC)-
Page Programming Time (Tpp)-
InterfaceParallel
Standby Supply Current1uA
Aiuto & FeedbackMostra prodotti simili (0) >

Caratteristiche

Traduzione AI
  • Single Power Supply Operation - 4.5 to 5.5 volt for read, erase, and program operations
  • 524,288 x 8 / 262,144 x 16 switchable
  • Boot Sector Architecture - T = Top Boot Sector - B = Bottom Boot Sector
  • Sector Structure: 16K-Byte x 1, 8K-Byte x 2, 32K-Byte x 1, and 64K-Byte x 7
  • Sector protection - Hardware method to disable any combination of sectors from program or erase operations - Temporary sector unprotected allows code changes in previously locked sectors
  • Latch-up protected to 100mA from -1V to Vcc + 1V
  • Compatible with JEDEC standard - Pinout and software compatible to single power supply Flash
  • High Performance - Access time: 70/90ns - Byte/Word program time: 9us/11us (typical) - Erase time: 0.7s/sector, 4s/chip (typical)
  • Low Power Consumption - Low active read current: 40mA (maximum) at 5MHz - Low standby current: 1uA (typical)
  • Minimum 100,000 erase/program cycle
  • 20 years data retention
  • Erase Suspend/ Erase Resume - Suspends sector erase operation to read data from or program data to another sector which is not being erased
  • Status Reply - Data# Polling & Toggle bits provide detection of program and erase operation completion
  • Ready/Busy# (RY/BY#) Output - Provides a hardware method of detecting program and erase operation completion
  • Hardware Reset (RESET#) Input - Provides a hardware method to reset the internal state machine to read mode
  • 44-Pin SOP
  • 48-Pin TSOP
  • All devices are RoHS Compliant

Parti alternative

MPNProduttoreImballaggioDisponibilitàPrezzo unitario
MX29F400CBTC-70GMXICTFSOP-48-18.4mm0$ 3.6698
MX29F400CBTI-70GTRMXICTSOP-480$ 6.3802