LCSC Electronics logoLCSC Electronics svg logo
Zaloguj
USD
Koszyk
MICROCHIP PIC24FJ128GA606-I/PT product image
  • PIC24FJ128GA606-I/PT thumbnail 1
  • PIC24FJ128GA606-I/PT thumbnail 2
  • PIC24FJ128GA606-I/PT thumbnail 3
  • Rozmieszczenie wyprowadzeń
  • Footprint
Zdjęcia poglądowe

MICROCHIP PIC24FJ128GA606-I/PT

Producent
MICROCHIP
Nr części prod.
PIC24FJ128GA606-I/PT
Nr LCSC
C219830
Opak.
TQFP-64(10x10)
Numer Klienta
Klucz. cechy
PIC 16 Bit 32MHz TQFP-64(10x10) Microcontrollers RoHS
Karta KatalogowaMICROCHIP PIC24FJ128GA606-I/PT
Zgodność z RoHS2 dokumentów dostępnych
Części alternatywne20
Brak w magazynie
Powiadom mnie
Minimum: 1Wielokrotność: 1Jednostka sprzedaży: Piece
Dodaj do Listy BOM
Szt.Cena jedn.(Tylko do wglądu)Suma całkowita
1+$ 9.8901$ 9.89
10+$ 8.596$ 85.96
30+$ 7.8071$ 234.21
100+$ 7.1454$ 714.54
Standardowa Obudowa160/Full Tray
Lepsza cena za większą ilość?
$

Specyfikacje Produktu

Wszystko
TypOpis
KategoriaIntegrated Circuits (ICs)/Embedded/Microcontrollers
ProducentMICROCHIP
Opak.TQFP-64(10x10)
ADC (Bit)10bit
Number of I/O53
Operating Temperature-40℃~+85℃
Voltage - Supply2V~3.6V
Program Memory TypeFLASH
EEPROM-
Program Storage Size128KB
CPU CorePIC
Core Size16 Bit
CPU Maximum Speed32MHz
Oscillator TypeBuilt-in
Pomoc i opiniePokaż podobne produkty (0) >

Funkcje

Tłumaczenie AI
  • Modified Harvard Architecture
  • Largest Program Memory Available for PIC24 (1024 Kbytes) for the Most Complex Applications
  • 32 Kbytes SRAM for All Part Variants
  • Up to 16 MIPS Operation @32 MHz
  • 8 MHz Fast RC Internal Oscillator:
    • 96 MHz PLL option
    • Multiple clock divide options
    • Run-time self-calibration capability for maintaining better than ±0.20% accuracy
    • Fast start-up
  • 17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier
  • 32-Bit by 16-Bit Hardware Divider
  • 16-Bit x 16-Bit Working Register Array
  • C Compiler Optimized Instruction Set Architecture
  • Two Address Generation Units for Separate Read and Write Addressing of Data Memory
  • USB x2.0 On-The-Go (OTG) Compliant
  • Dual Role Capable – Can Act as Either Host or Peripheral
  • Low-Speed (1.5 Mb/s) and Full-Speed (12 Mb/s) USB Operation in Host mode
  • Full-Speed USB Operation in Device mode
  • High-Precision PLL for USB
  • USB Device mode Operation from FRC Oscillator – No Crystal Oscillator Required
  • Supports up to 32 Endpoints (16 bidirectional):
    • USB module can use any RAM location on the device as USB endpoint buffers
  • On-Chip USB Transceiver with Interface for Off-Chip USB Transceiver
  • Supports Control, Interrupt, Isochronous and Bulk Transfers
  • On-Chip Pull-up and Pull-Down Resistors
  • 10/12-Bit, up to 24-Channel Analog-to-Digital (A/D) Converter:
    • 12-bit conversion rate of 200 ksps
    • Auto-scan and threshold compare features
    • Conversion available during Sleep
  • Three Rail-to-Rail, Enhanced Analog Comparators with Programmable Input/Output Configuration
  • Charge Time Measurement Unit (CTMU):
    • Used for capacitive touch sensing, up to 24 channels
    • Time measurement down to 100 ps resolution
  • Sleep and Idle modes Selectively Shut Down Peripherals and/or Core for Substantial Power Reduction and Fast Wake-up
  • Doze mode Allows CPU to Run at a Lower Clock Speed than Peripherals
  • Alternate Clock modes Allow On-the-Fly Switching to a Lower Clock Speed for Selective Power Reduction
  • Wide Range Digitally Controlled Oscillator (DCO) for Fast Start-up and Low-Power Operation
  • Large, Dual Partition Flash Program Array:
    • Capable of holding two independent software applications, including bootloader
    • Permits simultaneous programming of one partition while executing application code from the other
    • Allows run-time switching between Active Partitions
  • 10,000 Erase/Write Cycle Endurance, Typical
  • Data Retention: 20 Years Minimum
  • Self-Programmable under Software Control
  • Supply Voltage Range of 2.0V to 3.6V Operating Ambient Temperature Range of -40°C to +85°C
  • On-Chip Voltage Regulators (1.8V) for Low-Power Operation
  • Programmable Reference Clock Output
  • In-Circuit Serial Programming (ICSP) and In-Circuit Emulation (ICE) via 2 Pins
  • JTAG Boundary Scan Support
  • Fail-Safe Clock Monitor Operation:
    • Detects clock failure and switches to on-chip, low-power RC Oscillator
  • Power-on Reset (POR), Brown-out Reset (BOR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
  • Programmable High/Low-Voltage Detect (HLVD)
  • Flexible Watchdog Timer (WDT) with its Own RC Oscillator for Reliable Operation
  • Peripheral Pin Select (PPS) –Allows Independent I/O Mapping of Many Peripherals
  • Up to 5 External Interrupt Sources
  • Configurable Interrupt-on-Change on All I/O Pins:
    • Each pin is independently configurable for rising edge or falling edge change detection
  • Eight-Channel DMA Supports All Peripheral modules:
    • Minimizes CPU overhead and increases data throughput
  • Five 16-Bit Timers/Counters with Prescalers:
    • Can be paired as 32-bit timers/counters
  • Six Input Capture modules, Each with a Dedicated 16-Bit Timer
  • Six Output Compare/PWM modules, Each with a Dedicated 16-Bit Timer
  • Four Single Output CCPs (SCCPs) and Three Multiple Output CCPs (MCCPs):
    • Independent 16/32-bit time base for each module
    • Internal time base and period registers
    • Legacy PIC24F Capture and Compare modes (16 and 32-bit) Special Variable Frequency Pulse and Brushless DC Motor Output modes
  • Enhanced Parallel Master/Slave Port (EPMP/EPSP)
  • Hardware Real-Time Clock/Calendar (RTCC) with Timestamping
  • Three 3-Wire/4-Wire SPI modules:
    • Support 4 Frame modes
    • 8-level FIFO buffer
    • Support I²S operation
  • Three I²C modules Support Multi-Master/Slave mode and 7-Bit/10-Bit Addressing
  • Six UART modules:
    • Support RS-485, RS-232 and LIN/J2602
    • On-chip hardware encoder/decoder for IrDA
    • Auto-wake-up on Auto-Baud Detect (ABD)
    • 4-level deep FIFO buffer
  • Programmable 32-Bit Cyclic Redundancy Check (CRC) Generator
  • Four Configurable Logic Cells (CLCs):
    • Two inputs and one output, all mappable to peripherals or I/O pins
    • AND/OR/XOR logic and D/JK flip-flop functions
  • High-Current Sink/Source 18 mA/18 mA, on All I/O Pins
  • Configurable Open-Drain Outputs on Digital I/O Pins
  • 5.5V Tolerant Inputs on Multiple I/O Pins

Części alternatywne

MPNProducentOpakowanieDostępnośćCena jednostkowa
PIC24FJ1024GA606T-I/PTMICROCHIPTQFP-64(10x10)3$ 10.5338
PIC24FJ1024GB606-I/PTMICROCHIPTQFP-64(10x10)2$ 11.7818
PIC24FJ128GA606T-I/PTMICROCHIPTQFP-64(10x10)0$ 4.6968
PIC24FJ128GB606T-I/PTMICROCHIPTQFP-64(10x10)0$ 4.9314
PIC24FJ128GB606-I/PTMICROCHIPTQFP-64(10x10)0$ 0.4631
PIC24FJ256GA606T-I/PTMICROCHIPTQFP-64(10x10)0$ 4.8219
PIC24FJ256GB606T-I/PTMICROCHIPTQFP-64(10x10)0$ 5.058
PIC24FJ256GA606-I/PTMICROCHIPTQFP-64(10x10)0$ 7.5622
PIC24FJ256GB606-I/PTMICROCHIPTQFP-64(10x10)0$ 18.1837
PIC24FJ512GA606T-I/PTMICROCHIPTQFP-64(10x10)0$ 17.4409
PIC24FJ512GB606T-I/PTMICROCHIPTQFP-64(10x10)0$ 5.2309
PIC24FJ512GA606-I/PTMICROCHIPTQFP-64(10x10)0$ 9.194
PIC24FJ512GB606-I/PTMICROCHIPTQFP-64(10x10)0$ 7.2271
PIC24FJ1024GA606-I/PTMICROCHIPTQFP-64(10x10)0$ 10.16
PIC24FJ1024GB606T-I/PTMICROCHIPTQFP-64(10x10)0$ 10.9079
PIC24FJ128GA606-E/PTMICROCHIPTQFP-64(10x10)0$ 5.4159
PIC24FJ128GB606-E/PTMICROCHIPTQFP-64(10x10)0$ 5.689
PIC24FJ256GA606-E/PTMICROCHIPTQFP-64(10x10)0$ 5.581
PIC24FJ256GB606-E/PTMICROCHIPTQFP-64(10x10)0$ 5.8464
PIC24FJ512GB606-E/PTMICROCHIPTQFP-64(10x10)0$ 6.0284