LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
Broadcom HCPL-063L-500E product image
  • HCPL-063L-500E thumbnail 1
  • HCPL-063L-500E thumbnail 2
  • HCPL-063L-500E thumbnail 3
  • Pinout
  • Footprint
Immagini a scopo illustrativo

Broadcom HCPL-063L-500E

Produttore
Broadcom
Cod. Prod.
HCPL-063L-500E
Cod. LCSC
C188704
Imballo
SO-8
Numero Cliente
Attr. chiave
High Speed LVTTL Compatible Optocouplers
Scheda TecnicaBroadcom HCPL-063L-500E
Conformità RoHS1 documenti disponibili
Disponibile: 11,994
11,994 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.Importo totale
1+$ 1.7586$ 1.76
10+$ 1.4977$ 14.98
30+$ 1.3353$ 40.06
100+$ 1.0237$ 102.37
500+$ 0.9482$ 474.10
1,500+$ 0.9154$ 1373.10
Package Standard1500/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIsolators/Optocouplers, Optoisolators/Logic Output Optoisolators
ProduttoreBroadcom
ImballoSO-8
Load Voltage-
Power Dissipation85mW
Output Current50mA
Low Level Delay Time100ns
High Level Delay Time75ns
FeaturesOutput enable control;Open-collector output
Reverse Voltage5V
Current transfer ratio-
Voltage - Forward(Vf)1.5V
Voltage - Supply2.7V~3.6V;4.5V~5.5V
Forward Current(If)20mA
Operating Temperature-40℃~+85℃
CMTI(kV/us)25kV/us
Number of Channels1
Input threshold current5mA
Isolation Voltage(Vrms)3.75kV
Input TypeDC
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

The HCPL-260L/060L/263L/063L are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 15 kV/μs at 3.3 V.

This unique design provides maximum AC and DC circuit isolation while achieving LVTTL/LVCMOS compatibility. The optocoupler AC and DC operational parameters are guaranteed from -40 °C to +85 °C allowing troublefree system performance.

These optocouplers are suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and are recommended for use in extremely high ground or induced noise environments.

Caratteristiche

Traduzione AI
  • 3.3V/5V Dual Supply Voltages
  • Low power consumption
  • 15 kV/μs minimum Common Mode Rejection (CMR) at VCM = 1000 V
  • High speed: 15 MBd typical
  • LVTTL/LVCMOS compatible
  • Low input current capability: 5 mA
  • Guaranteed AC and DC performance over temperature: -40 °C to +85 °C
  • Available in 8-pin DIP, SOIC-8
  • Strobable output (single channel products only)
  • Safety approvals: UL, CSA, IEC/EN/DIN EN 60747-5-5

Applicazioni

Traduzione AI
  • Isolated line receiver
  • Computer-peripheral interfaces
  • Microprocessor system interfaces Digital isolation for A/D, D/A conversion
  • Switching power supply
  • Instrument input/output isolation
  • Ground loop elimination
  • Pulse transformer replacement Field buses