LCSC Electronics logoLCSC Electronics svg logo
Iniciar sesión
USD
TI TXS0102DQER product image
  • TXS0102DQER thumbnail 1
  • TXS0102DQER thumbnail 2
  • TXS0102DQER thumbnail 3
  • Diagrama de pines
  • Footprint
Imágenes ilustrativas

TI TXS0102DQER

Fabricante
N.º de pieza fab.
TXS0102DQER
Nº LCSC
C2652935
Emb.
X2-SON-8(1x1.4)
Número de Cliente
Atrib. clave
2-bit bidirectional voltage level shifter suitable for open-drain and push-pull applications
Hoja de DatosTI TXS0102DQER
Cumplimiento RoHS2 documentos disponibles
Piezas alternativas1
Garantía en cada pedido
100% Auténtico · Devolución o Reemplazo en 30 Días
En stock: 85,450
85,450 En stock, envío inmediato
Mínimo: 5Múltiplo: 5Unidad de venta: Piece
Añadir a la Lista BOM
Cant.Prec. unit.Importo total
5+$ 0.2294$ 1.15
50+$ 0.1806$ 9.03
150+$ 0.1597$ 23.96
500+$ 0.1336$ 66.80
2,500+$ 0.122$ 305.00
5,000+$ 0.115$ 575.00
Encapsulado Estándar5000/Full Reel
¿Mejor precio por mayor cantidad?
$

Especificaciones del Producto

Todo
TipoDescripción
CategoríaIntegrated Circuits (ICs)/Logic/Translators, Level Shifters
FabricanteTI
Emb.X2-SON-8(1x1.4)
output typeOpen-drain;Push-Pull
InterfaceI2C;SMBus;UART
Output Signal-
Input Signal-
Operating Temperature-40℃~+85℃
Voltage - Supply2.3V~5.5V;1.65V~3.6V
Data Rate24Mbps
Number of Elements1
Channel TypeBidirectional
FeaturesAutomatic direction detection;Output enable high-impedance;Integrated pull-up resistor
Number of Circuits2
Current - Output High(IOH)-
Current - Output Low(IOL)-

Descripción

Traducción por IA

This 2-bit non-inverting translator is a bidirectional voltage-level translator designed to establish digital switching compatibility between mixed-voltage systems. It features two independent configurable supply rails: Port A supports an operating voltage range of 1.65V to 3.6V and tracks the VCCA supply, while Port B supports an operating voltage range of 2.3V to 5.5V and tracks the VCCB supply. As a result, the device accommodates both lower and higher logic signal levels, enabling bidirectional translation between any combination of 1.8V, 2.5V, 3.3V, and 5V voltage nodes.

Características

Traducción por IA
  • No direction control signal required
  • Maximum data rate: 24Mbps (push-pull); 2Mbps (open-drain)
  • NanoStar package
  • Port A supports 1.65V to 3.6V; Port B supports 2.3V to 5.5V (VCCA ≤ VCCB)
  • VCC isolation: if either VCC input is tied to GND, both ports enter high-impedance state
  • No power sequencing required: VCCA or VCCB may ramp up in any order
  • |_off supports partial power-down mode operation
  • Latch-up performance exceeds 100mA per JESD 78 Class II
  • ESD protection exceeds JESD 22 requirements
    • Port A: 2500V HBM (A114-B); 250V MM (A115-A); 1500V CDM (C101)
    • Port B: 8kV HBM (A114-B); 250V MM (A115-A); 1500V CDM (C101)

Aplicaciones

Traducción por IA
  • I²C/SMBus
  • UART
  • General-Purpose Input/Output (GPIO)

Piezas alternativas

MPNFabricanteEmpaqueDisponibilidadPrecio unitario
TPT29306L1-DFGR3PEAKDFN-8(1x1.4)72$ 0.6605