LCSC Electronics logoLCSC Electronics svg logo
Iniciar sesión
USD
Carrito
NXP S9S08LG32J0VLF product image
Imágenes ilustrativas

NXP S9S08LG32J0VLF

Fabricante
NXP
N.º de pieza fab.
S9S08LG32J0VLF
Nº LCSC
C1344549
Emb.
LQFP-48(7x7)
Número de Cliente
Atrib. clave
S08 8 Bit 40MHz LQFP-48(7x7) Microcontrollers RoHS
Hoja de DatosNXP S9S08LG32J0VLF
Cumplimiento RoHS2 documentos disponibles
Piezas alternativas20
Garantía en cada pedido
100% Auténtico · Devolución o Reemplazo en 30 Días
Agotado
Avisarme
Mínimo: 1Múltiplo: 1Unidad de venta: Piece
Añadir a la Lista BOM
Cant.Prec. unit.(Solo como referencia)Importo total
1+$ 6.942$ 6.94
250+$ 2.6866$ 671.65
500+$ 2.592$ 1296.00
1,000+$ 2.5455$ 2545.50
Encapsulado Estándar250/Full Tray
¿Mejor precio por mayor cantidad?
$

Especificaciones del Producto

Todo
TipoDescripción
CategoríaIntegrated Circuits (ICs)/Embedded/Microcontrollers
FabricanteNXP
Emb.LQFP-48(7x7)
ADC (Bit)12bit
Number of I/O39
Operating Temperature-40℃~+105℃
Voltage - Supply2.7V~5.5V
Program Memory TypeFLASH
EEPROM-
Program Storage Size32KB
CPU CoreS08
Core Size8 Bit
CPU Maximum Speed40MHz
Oscillator TypeBuilt-in
Ayuda y comentariosMostrar productos similares (0) >

Características

Traducción por IA
  • 8-bit HCS08 Central Processor Unit (CPU)
    • Up to 40 MHz CPU at 5.5 V to 2.7 V across temperature range of -40 °C to 85 °C and -40 °C to 105 °C
    • HCS08 instruction set with added BGND instruction
    • Support for up to 32 interrupt/reset sources
  • On-Chip Memory
    • 32 KB or 18 KB dual array flash; read/program/erase over full operating voltage and temperature
    • 1984 byte random access memory (RAM)
    • Security circuitry to prevent unauthorized access to RAM and flash contents
  • Power-Saving Modes
    • Two low-power stop modes (stop2 and stop3)
    • Reduced-power wait mode
    • Peripheral clock gating register can disable clocks to unused modules, thereby reducing currents
    • Low power On-Chip crystal oscillator (XOSC) that can be used in low-power modes to provide accurate clock source to real time counter and LCD controller
    • 100 μs typical wakeup time from stop3 mode
  • Clock Source Options
    • Oscillator (XOSC) — Loop-control Pierce oscillator; crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz
    • Internal Clock Source (ICS) — Internal clock source module containing a frequency-locked-loop (FLL) controlled by internal or external reference; precision trimming of internal reference allows 0.2% resolution and 2% deviation over temperature and voltage; supports bus frequencies from 1 MHz to 20 MHz
  • System Protection
    • COP reset with option to run from dedicated 1 kHz internal clock or bus clock
    • Low-voltage warning with interrupt
    • Low-voltage detection with reset
    • Illegal opcode detection with reset
    • Illegal address detection with reset
    • Flash and RAM protection
  • Development Support
    • Single-wire background debug interface
    • Breakpoint capability to allow single breakpoint setting during in-circuit debugging and plus two more breakpoints in On-Chip debug module
  • On-Chip in-circuit emulator (ICE) debug module containing three comparators and nine trigger modes; eight deep FIFO for storing change-of-flow addresses and event-only data; debug module supports both tag and force breakpoints
  • Peripherals
    • LCD — Up to 4x41 or 8x37 LCD driver with internal charge pump
    • ADC — Up to 16-channel, 12-bit resolution, 2.5 μs conversion time, automatic compare function, temperature sensor, internal bandgap reference channel, runs in stop3 and can wake up the system, fully functional from 5.5 V to 2.7 V
    • SCI — Full duplex non-return to zero (NRZ), LIN master extended break generation, LIN slave extended break detection, wakeup on active edge
    • SPI — Full-duplex or single-wire bidirectional, double-buffered transmit and receive, master or slave mode, MSB-first or LSB-first shifting
    • IIC — With up to 100 kbps with maximum bus loading, multi-master operation, programmable slave address, interrupt driven byte-by-byte data transfer, supports broadcast mode and 10-bit addressing
    • TPMx — One 6 channel and one 2 channel, selectable input capture, output compare, or buffered edge or center-aligned PWM on each channel
    • MTIM — 8-bit counter with match register, four clock sources with prescaler dividers, can be used for periodic wakeup
    • RTC — 8-bit modulus counter with binary or decimal based prescaler, three clock sources including one external source, can be used for time base, calendar, or task scheduling functions
    • KBI — One keyboard control module capable of supporting 8x8 keyboard matrix
    • IRQ — External pin for wakeup from low-power modes
  • Input/Output
    • 39, 53, or 69 GPIOs
    • 8 KBI and 1 IRQ interrupt with selectable polarity
    • Hysteresis and configurable pullup device on all input pins, configurable slew rate and drive strength on all output pins
  • Package Options
    • 48-pin LQFP, 64-pin LQFP, and 80-pin LQFP

Piezas alternativas

MPNFabricanteEmpaqueDisponibilidadPrecio unitario
MC9S08DZ32ACLFNXPLQFP-48(7x7)3$ 16.3371
MC9S08LG32CLFNXPLQFP-48(7x7)0$ 7.0777
S9S08DN60F2VLFNXPLQFP-48(7x7)0$ 10.2917
S9S08DN48F2MLFNXPLQFP-48(7x7)0$ 9.5727
S9S08DN32F2VLFNXPLQFP-48(7x7)0$ 9.3211
S9S08DN32F2CLFNXPLQFP-48(7x7)0$ 8.3822
S9S08DZ96F2VLFNXPLQFP-48(7x7)0$ 11.6279
S9S08DV60F2MLFNXPLQFP-48(7x7)0$ 10.3541
S9S08DZ96F2MLFNXPLQFP-48(7x7)0$ 11.5679
S9S08DZ128F2MLFNXPLQFP-48(7x7)0$ 6.5002
S9S08DV128F2CLFRNXPLQFP-48(7x7)0$ 11.3239
MC9S08DV32ACLFNXPLQFP-48(7x7)0$ 12.636
S9S08DZ32F2MLFRNXPLQFP-48(7x7)0$ 10.4568
MC9S08DV32CLFNXPLQFP-48(7x7)0$ 17.5836
MC9S08DV48AMLFNXPLQFP-48(7x7)0$ 15.1872
MC9S08DN60ACLFNXPLQFP-48(7x7)0$ 9.0665
MC9S08DN60MLFNXPLQFP-48(7x7)0$ 21.3599
MC9S08DN32AVLFNXPLQFP-48(7x7)0$ 12.8391
S9S08DZ48F2CLFRNXPLQFP-48(7x7)0$ 10.0417
S9S08DZ60F2MLFRNXPLQFP-48(7x7)0$ 6.816