LCSC Electronics logoLCSC Electronics svg logo
Entrar
USD

Infineon CY9BF321LPMC1-GNE2

Fabricante
Cód. da peça
CY9BF321LPMC1-GNE2
Nº LCSC
C5690476
Emb.
LQFP-64(10x10)
Número do Cliente
Atrib. princ.
ARM Cortex-M3 32 Bit 72MHz LQFP-64(10x10) Microcontrollers RoHS
Folha de DadosInfineon CY9BF321LPMC1-GNE2
Conformidade RoHS1 documentos disponíveis
Peças alternativas5
Garantia em cada pedido
100% Autêntico · Devolução ou Substituição em 30 Dias

Especificações do Produto

Tudo
TipoDescrição
CategoriaIntegrated Circuits (ICs)/Embedded/Microcontrollers
FabricanteInfineon
Emb.LQFP-64(10x10)
DAC (Bit)10bit
ADC (Bit)12bit
Number of I/O50
Operating Temperature-40℃~+105℃
Program Memory TypeFLASH
Voltage - Supply2.7V~5.5V
EEPROM-
Program Storage Size96KB
CPU CoreARM Cortex-M3
Core Size32 Bit
CPU Maximum Speed72MHz
Oscillator TypeBuilt-in+External

Descrição

Tradução por IA

The CY9B320M series is a highly integrated 32-bit microcontroller designed for embedded controller applications featuring low-power modes and cost efficiency. Based on the Arm® Cortex®-M3 processor, the series integrates on-chip Flash and SRAM, and offers a wide range of peripheral functions including various timers, ADC, DAC, and communication interfaces (USB, UART, CSIO, I2C, LIN).

Recursos

Tradução por IA
  • 32-bit Arm® Cortex®-M3 core, processor revision r2p1, up to 72 MHz operating frequency.
  • Integrated NVIC: supports 1 NMI and 48 peripheral interrupts with 16 priority levels.
  • Integrated 24-bit SysTick timer for OS task management.
  • Dual-operation flash supporting simultaneous erase, write, and read operations on upper and lower banks; main storage up to 256 Kbytes, work area 32 Kbytes; zero-wait-cycle read; code protection security feature.
  • On-chip SRAM consisting of two independent SRAMs (SRAM0 and SRAM1), total capacity up to 32 Kbytes.
  • USB interface supporting device and host functions; built-in PLL for USB, generating USB clock via main clock multiplication.
  • USB device compliant with USB 2.0 full-speed specification, up to 6 endpoints, endpoints 1–5 with double-buffer architecture.
  • USB host compliant with USB 2.0 full-/low-speed specification; supports bulk, interrupt, and isochronous transfers; automatic device connect/disconnect detection; automatic IN/OUT token handshake packet handling; maximum data packet length of 256 bytes; wakeup function.
  • Multi-function serial interface supporting up to eight channels; four channels (ch.0/1/3/4) with 16-stage × 9-bit FIFO; each channel independently selectable for UART, CSIO, or LIN mode.
  • UART mode: full-duplex double-buffer; selectable parity; dedicated baud rate generator; external clock as serial clock; channel 4 hardware flow control (CTS/RTS); multiple error detection functions.
  • CSIO mode: full-duplex double-buffer; dedicated baud rate generator; overrun error detection.
  • LIN mode: LIN protocol Rev.2.1; full-duplex double-buffer; master/slave mode; configurable LIN break field and delimiter length.
  • I2C interface supporting standard mode (up to 100 kbps) and fast mode (up to 400 kbps).
  • DMA controller with eight independent channels; bus independent of CPU for simultaneous CPU operation; software or on-chip peripheral request-initiated transfers; 32-bit (4 Gbytes) transfer address range; block, burst, and demand transfer modes; byte, half-word, or word transfer data types.
  • ADC: up to 26 channels; successive approximation type; 2 built-in units; conversion time 0.8 μs @ 5 V; priority conversion (2 priority levels); scan conversion mode; built-in FIFO for conversion data storage (scan conversion: 16 stages, priority conversion: 4 stages).
  • DAC: up to 2 channels; R-2R type; 10-bit resolution.
  • Base timer: up to 8 channels; each channel selectable as 16-bit PWM timer, 16-bit PPG timer, 16/32-bit reload timer, or 16/32-bit PWC timer mode.
  • GPIO: usable as general-purpose I/O when pins are not allocated to peripherals; built-in port relocation function for assigning peripheral functions to designated I/O ports; per-pin pull-up control; direct pin-level readback; up to 65 high-speed GPIO in 80-pin package; some ports 5V-tolerant.
  • Dual timer consisting of two programmable 32/16-bit down counters.