LCSC Electronics logoLCSC Electronics svg logo
Zaloguj
USD
Koszyk
TI TPS16630RGET product image
Zdjęcia poglądowe

TI TPS16630RGET

Producent
TI
Nr części prod.
TPS16630RGET
Nr LCSC
C2155684
Opak.
VQFN-24(4x4)
Numer Klienta
Klucz. cechy
IC SURGE STOPPER 4.5V~60V VQFN-24(4x4)
Karta KatalogowaTI TPS16630RGET
Zgodność z RoHS2 dokumentów dostępnych
Gwarancja na każde zamówienie
100% Oryginalne · Zwrot lub Wymiana w ciągu 30 Dni
Brak w magazynie
Powiadom mnie
Minimum: 1Wielokrotność: 1Jednostka sprzedaży: Piece
Dodaj do Listy BOM
Szt.Cena jedn.(Tylko do wglądu)Suma całkowita
1+$ 8.8253$ 8.83
10+$ 7.5359$ 75.36
30+$ 6.7497$ 202.49
100+$ 6.0902$ 609.02
Standardowa Obudowa250/Full Reel
Lepsza cena za większą ilość?
$

Specyfikacje Produktu

Wszystko
TypOpis
KategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Current Regulation/Management
ProducentTI
Opak.VQFN-24(4x4)
FeaturesOvercurrent Protection;Short-Circuit Protection;Overvoltage clamping protection;Under-voltage lockout;Thermal Protection;Overload protection
Voltage - Supply4.5V~60V
Operating Temperature-40℃~+125℃
FET TypeIntegrated FET
Trigger Current600mA~6A
Width4mm
Length4mm
Threshold Voltage-
Height-
Peak Output Current(Source)-
Number of Channels1
RDS(on)30.44mΩ
Peak Output Current(Sink)-
Pomoc i opiniePokaż podobne produkty (0) >

Opis

Tłumaczenie AI

The TPS1663x is an easy-to-use, positive 60V, 6A electronic fuse with an integrated 31mΩ FET. It provides protection for the load, power supply, and the electronic fuse itself, along with adjustable features such as precise overcurrent protection, fast short-circuit protection, output slew rate control, overvoltage protection, and undervoltage lockout. The TPS16332 device integrates an adjustable output power limit (PLIM) function to simplify and enable compliance with standards such as IEC61010-1 and UL1310. The device also features adjustable overcurrent protection. PGOOD can be used to enable and disable downstream DC/DC converter control.

The shutdown pin allows external control of enabling and disabling the internal FET and placing the device into a low-current shutdown mode. For system status monitoring and downstream load control, the device provides fault and precise current monitor outputs. The MODE pin can be used to flexibly configure the device between two current-limiting fault responses (latch/auto-retry).

These devices are available in a 4mm × 4mm 24-pin VQFN package, rated for a temperature range of -40°C to +125°C.

Funkcje

Tłumaczenie AI
  • Operating voltage range: 4.5V to 60V
  • Absolute maximum voltage: 67V
  • Integrated 60V, 31mΩ RON hot-swap FET
  • Adjustable current limit: 0.6A to 6A (±7%)
  • Low quiescent current: 21μA in shutdown
  • Adjustable output power limit (TPS16632 only) (±6%)
  • Adjustable UVLO and OVP cutoff with ±2% accuracy
  • 39V fixed maximum overvoltage clamp (TPS16632 only)
  • Adjustable output slew rate control for inrush current limiting; charges large and unknown capacitive loads via thermal regulation during device power-up
  • Power good output (PGOOD)
  • Selectable overcurrent fault response (auto-retry and latch-off modes)
  • Analog current monitor (IMON) output (±6%)
  • UL 2367 certified
  • IEC 62368-1 certified
  • Easy-to-use 24-pin VQFN package

Zastosowania

Tłumaczenie AI
  • Factory Automation and Control – PLC, DCS, HMI, I/O Modules, Sensor Hubs
  • Motor Drives – CNC, Encoder Power Supplies
  • Electronic Circuit Breakers
  • Telecom Radio
  • Industrial Printers