LCSC Electronics logoLCSC Electronics svg logo
로그인
USD
NXP S9S08SG16E1MTJ product image
실제 제품과 다를 수 있음

NXP S9S08SG16E1MTJ

제조업체
제조사 품번
S9S08SG16E1MTJ
LCSC 번호
C1340698
포장
TSSOP-20
고객 번호
주요 제원
S08 8 Bit 40MHz TSSOP-20 Microcontrollers RoHS
데이터시트NXP S9S08SG16E1MTJ
RoHS 준수2개 문서 이용 가능
대체 부품5
모든 주문 보장
100% 정품 · 30일 반품 또는 교환
품절
재입고 알림
최소값: 1배수: 1판매 단위: Piece
BOM 목록에 추가
수량단가(참고용)총액
1+$ 3.9922$ 3.99
200+$ 1.5459$ 309.18
500+$ 1.492$ 746.00
1,000+$ 1.465$ 1465.00
표준 패키지75/Full Tube
수량이 많을수록 더 좋은 가격?
$

제품 사양

전체
타입설명
카테고리Integrated Circuits (ICs)/Embedded/Microcontrollers
제조업체NXP
포장TSSOP-20
ADC (Bit)10bit
Number of I/O16
Operating Temperature-40℃~+125℃
Program Memory TypeFLASH
Voltage - Supply2.7V~5.5V
EEPROM-
Program Storage Size16KB
CPU CoreS08
Core Size8 Bit
CPU Maximum Speed40MHz
Oscillator TypeBuilt-in
도움말 및 피드백유사 제품 보기 (0) >

주요 특징

AI 번역
  • 8-bit HCS08 Central Processor Unit (CPU)
    • Up to 40 MHz CPU at 5.5 V to 2.7 V across temperature range of -40 °C to 85 °C and -40 °C to 105 °C
    • HCS08 instruction set with added BGND instruction
    • Support for up to 32 interrupt/reset sources
  • On-Chip Memory
    • 32 KB or 18 KB dual array flash; read/program/erase over full operating voltage and temperature
    • 1984 byte random access memory (RAM)
    • Security circuitry to prevent unauthorized access to RAM and flash contents
  • Power-Saving Modes
    • Two low-power stop modes (stop2 and stop3)
    • Reduced-power wait mode
    • Peripheral clock gating register can disable clocks to unused modules, thereby reducing currents
    • Low power On-Chip crystal oscillator (XOSC) that can be used in low-power modes to provide accurate clock source to real time counter and LCD controller
    • 100 μs typical wakeup time from stop3 mode
  • Clock Source Options
    • Oscillator (XOSC) — Loop-control Pierce oscillator; crystal or ceramic resonator range of 31.25 kHz to 38.4 kHz or 1 MHz to 16 MHz
    • Internal Clock Source (ICS) — Internal clock source module containing a frequency-locked-loop (FLL) controlled by internal or external reference; precision trimming of internal reference allows 0.2% resolution and 2% deviation over temperature and voltage; supports bus frequencies from 1 MHz to 20 MHz
  • System Protection
    • COP reset with option to run from dedicated 1 kHz internal clock or bus clock
    • Low-voltage warning with interrupt
    • Low-voltage detection with reset
    • Illegal opcode detection with reset
    • Illegal address detection with reset
    • Flash and RAM protection
  • Development Support
    • Single-wire background debug interface
    • Breakpoint capability to allow single breakpoint setting during in-circuit debugging and plus two more breakpoints in On-Chip debug module
  • On-Chip in-circuit emulator (ICE) debug module containing three comparators and nine trigger modes; eight deep FIFO for storing change-of-flow addresses and event-only data; debug module supports both tag and force breakpoints
  • Peripherals
    • LCD — Up to 4x41 or 8x37 LCD driver with internal charge pump
    • ADC — Up to 16-channel, 12-bit resolution, 2.5 μs conversion time, automatic compare function, temperature sensor, internal bandgap reference channel, runs in stop3 and can wake up the system, fully functional from 5.5 V to 2.7 V
    • SCI — Full duplex non-return to zero (NRZ), LIN master extended break generation, LIN slave extended break detection, wakeup on active edge
    • SPI — Full-duplex or single-wire bidirectional, double-buffered transmit and receive, master or slave mode, MSB-first or LSB-first shifting
    • IIC — With up to 100 kbps with maximum bus loading, multi-master operation, programmable slave address, interrupt driven byte-by-byte data transfer, supports broadcast mode and 10-bit addressing
    • TPMx — One 6 channel and one 2 channel, selectable input capture, output compare, or buffered edge or center-aligned PWM on each channel
    • MTIM — 8-bit counter with match register, four clock sources with prescaler dividers, can be used for periodic wakeup
    • RTC — 8-bit modulus counter with binary or decimal based prescaler, three clock sources including one external source, can be used for time base, calendar, or task scheduling functions
    • KBI — One keyboard control module capable of supporting 8x8 keyboard matrix
    • IRQ — External pin for wakeup from low-power modes
  • Input/Output
    • 39, 53, or 69 GPIOs
    • 8 KBI and 1 IRQ interrupt with selectable polarity
    • Hysteresis and configurable pullup device on all input pins, configurable slew rate and drive strength on all output pins
  • Package Options
    • 48-pin LQFP, 64-pin LQFP, and 80-pin LQFP

대체 부품

MPN제조사대체 유형포장재고 현황단가
S9S08SG16E1MTJRNXP대체 패키징TSSOP-200$ 2.8865
S9S08SG32E1MTJNXP유사 제품TSSOP-200$ 4.4076
S9S08SG32E1MTJRNXP유사 제품TSSOP-200$ 4.3806
S9S08SG16E1VTJNXP유사 제품TSSOP-200$ 3.7893
S9S08SG16E1VTJRNXP유사 제품TSSOP-200$ 3.7893