ADI LTC6990HDCB#TRMPBF

The LTC6990 is a precision silicon oscillator with a programmable frequency range of 488Hz to 2MHz. It can be used as a fixed-frequency or voltage-controlled oscillator (VCO). A single resistor, RSET, programs the LTC6990’s internal master oscillator frequency. The output frequency is determined by this master oscillator and an internal frequency divider, programmable to eight settings from 1 to 128. Optionally, a second resistor at the SET input provides linear voltage control of the output frequency and can be used for frequency modulation. A narrow or wide VCO tuning range can be configured by the appropriate selection of the two resistors. The LTC6990 includes an enable function that is synchronized with the master oscillator to ensure clean, glitch-free output pulses. The disabled output can be configured to be high impedance or forced low.

• Fixed-Frequency or Voltage-Controlled Operation Fixed: Single Resistor Programs Frequency with <1.5% Max Error VCO: Two Resistors Set VCO Center Frequency and Tuning Range
• Frequency Range: 488Hz to 2MHz
• 2.25V to 5.5V Single Supply Operation
• 72μA Supply Current at 100kHz
• 500μs Start-Up Time
• VCO Bandwidth >300kHz at 1MHz
• CMOS Logic Output Sources/Sinks 20mA
• 50% Duty Cycle Square Wave Output
• Output Enable (Selectable Low or Hi-Z When Disabled)
• -55°C to 125°C Operating Temperature Range
• Available in Low Profile (1mm) SOT-23 (ThinSOT) and 2mm × 3mm DFN Package
• AEC-Q100 Qualified for Automotive Applications

• Low Cost Precision Programmable Oscillator
• Voltage-Controlled Oscillator
• High Vibration, High Acceleration Environments
• Replacement for Fixed Crystal and Ceramic Oscillators
• Portable and Battery-Powered Equipment