LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
ADI LTC4078EDD#TRPBF product image
Abbildung ähnlich

ADI LTC4078EDD#TRPBF

Hersteller
Herst.-Teilenr.
LTC4078EDD#TRPBF
LCSC-Nr.
C687262
Verp.
DFN-10-EP(3x3)
Kundennummer
Hauptmerkm.
Lithium Battery 950mA DFN-10-EP(3x3) Battery Management RoHS
DatenblattADI LTC4078EDD#TRPBF
RoHS-Konformität1 Dokumente verfügbar
Alternativteile5
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 2.2412$ 2.24
10+$ 1.9019$ 19.02
30+$ 1.689$ 50.67
100+$ 1.4715$ 147.15
500+$ 1.3728$ 686.40
1,000+$ 1.3312$ 1331.20
Standardgehäuse2500/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Battery Management
HerstellerADI
Verp.DFN-10-EP(3x3)
Operating Temperature-40℃~+85℃
Interface-
Quiescent Current40uA
0V Battery Charge-
Type of BatteryLithium Battery
Operating Voltage4.3V~5.5V
FeaturesConstant current charging;Constant voltage charging;Trickle charging;Automatic recharge;Charge termination;Programmable charging current;Overvoltage protection;Under-voltage lockout
The Chip TypeCharging IC
Balance Current-
Charge Current - Max950mA

Beschreibung

KI-Übersetzung

The LTC4078/LTC4078X are standalone linear chargers that are capable of charging a single-cell Li-Ion/Polymer battery from both wall adapter and USB inputs. The chargers can detect power at the inputs and automatically select the appropriate power source for charging. No external sense resistor or blocking diode is required for charging due to the internal MOSFET architecture. The LTC4078/LTC4078X feature a maximum 22V rating for both wall adapter and USB inputs, although charging stops if the selected power source exceeds the overvoltage limit. Internal thermal feedback regulates the battery charge current to maintain a constant die temperature during high power operation or high ambient temperature conditions. The float voltage is fixed at 4.2V and the charge current is programmed with an external resistor. The LTC4078/LTC4078X terminate the charge cycle when the charge current drops below the programmed termination threshold after the final float voltage is reached. Other features include battery present detection, automatic recharge, undervoltage lockout, charge status outputs, and “power present” status outputs to indicate the presence of wall adapter or USB power. The device is offered in a low profile (0.75mm) 3mm×3mm 10-lead DFN package.

Merkmale

KI-Übersetzung
  • 22V Maximum Voltage for Wall Adapter and USB Inputs
  • Charge Single-Cell Li-Ion Batteries from Wall Adapter and USB Inputs
  • Automatic Input Power Detection and Selection
  • Charge Current Programmable Up to 950mA from Wall Adapter Input
  • Overvoltage Lockout for Wall Adapter and USB Inputs
  • Battery Detection Input Disables Charger When No Battery is Present
  • No External MOSFET, Sense Resistor or Blocking Diode Needed
  • Thermal Regulation Maximizes Charge Rate Without Risk of Overheating
  • Preset Charge Voltage with ±0.6% Accuracy
  • Programmable Charge Current Termination
  • 40μA USB Suspend Current in Shutdown
  • Charge Status Output
  • Automatic Recharge
  • Available Without Trickle Charge (LTC4078X)
  • Available in a Thermally Enhanced, Low Profile (0.75mm) 10-Lead (3mm×3mm) DFN Package

Anwendungen

KI-Übersetzung
  • Cellular Telephones
  • Handheld Computers
  • Portable MP3 Players
  • Digital Cameras

Alternativteile

MPNHerstellerAlternativtypVerpackungVerfügbarkeitStückpreis
BQ24080DRCRTIÄhnlicheVSON-10-EP(3x3)2$ 1.551
LM3658SDX-A/NOPBTIÄhnlicheWSON-10(3x3)5$ 1.3976
MCP73837-FCI/MFMICROCHIPÄhnlicheDFN-10(3x3)4$ 1.8413
LP28303AQVFLOWPOWERÄhnlicheTDFN-10-EP(3x3)11,290$ 0.3489
LTC4063EDD#TRPBFADIÄhnlicheDFN-10-EP(3x3)2$ 8.1035