LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
ADI LTC2064HMS8#TRPBF product image
Abbildung ähnlich

ADI LTC2064HMS8#TRPBF

Hersteller
Herst.-Teilenr.
LTC2064HMS8#TRPBF
LCSC-Nr.
C679301
Verp.
MSOP-8
Kundennummer
Hauptmerkm.
2uA Supply Current Low Ip Zero-Drift Operational Amplifiers
DatenblattADI LTC2064HMS8#TRPBF
RoHS-Konformität1 Dokumente verfügbar
Garantie auf jede Bestellung
100% Authentisch · 30-Tage-Rückgabe oder -Umtausch
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 3.1457$ 3.15
200+$ 1.2179$ 243.58
500+$ 1.1747$ 587.35
1,000+$ 1.1531$ 1153.10
Standardgehäuse2500/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps
HerstellerADI
Verp.MSOP-8
Output Current51mA
Number of Channels2
Vos - Input Offset Voltage10uV
Slew Rate0.0035V/us
Input Offset Current(Ios)30pA
Operating Temperature-40℃~+125℃
Common Mode Rejection Ratio(CMRR)130dB
Ib - Input Bias Current100pA
Input Offset Voltage Drift(Vos TC)60nV/℃
Quiescent Current4uA
Gain Bandwidth Product20kHz
FeaturesEnable/shutdown function;EMI filtering/RF suppression;Zero drift / auto-zero;Reverse-phase input protection
Input Voltage Noise Density220nV/√Hz@100Hz
Rail to RailRail-to-Rail Input, Rail-to-Rail Output
Single Supply1.7V~5.25V

Beschreibung

KI-Übersetzung

The LTC2063/LTC2064/LTC2065 are single, dual, and quad low power, zero-drift, 20kHz amplifiers. The LTC2063/LTC2064/LTC2065 enable high resolution measurement at extremely low power levels. Typical supply current is 1.4µA per amplifier with a maximum of 2µA. The available shutdown mode has been optimized to minimize power consumption in duty-cycled applications and features low charge loss during power-up, reducing total system power. The LTC2063/LTC2064/LTC2065’s self-calibrating circuitry results in very low input offset (5µV max) and offset drift (0.02µV/°C). The maximum input bias current is only 20µA and does not exceed 100pA over the full specified temperature range. The extremely low input bias current of the LTC2063/LTC2064/LTC2065 allows the use of high value power-saving resistors in the feedback network. With its ultralow quiescent current and outstanding precision, the LTC2063/LTC2064/LTC2065 can serve as a signal chain building block in portable, energy harvesting and wireless sensor applications. The LTC2063 is available in 6-lead SC70 and 5-lead TSOT-23 packages. The LTC2064 is available in 8-lead MSOP and 10-lead DFN packages. The LTC2065 is available in 14-lead TSSOP and 16-lead 3mm×3mm QFN packages. These devices are fully specified over the -40°C to 85°C and -40°C to 125°C temperature ranges.

Merkmale

KI-Übersetzung
  • Low Supply Current: 2µA Maximum (per Amplifier)
  • Offset Voltage: 5µV Maximum
  • Offset Voltage Drift: 0.02µV/°C Maximum
  • Input Bias Current: 3pA Typical 30pA Maximum, -40°C to 85°C 100pA Maximum, -40°C to 125°C
  • Integrated EMI Filter (114dB Rejection at 1.8GHz)
  • Shutdown Current: 170nA Maximum (per Amplifier)
  • Rail-to-Rail Input and Output
  • 1.7V to 5.25V Operating Supply Range
  • AVOL: 140dB Typical
  • Low-Charge Power-Up for Duty Cycled Applications
  • Specified Temperature Ranges: -40°C to 85°C, -40°C to 125°C
  • SC70, TSOT23, MS8, DFN10, TSSOP14 and QFN16 Packages

Anwendungen

KI-Übersetzung
  • Signal Conditioning in Wireless Mesh Network
  • Portable Instrumentation Systems
  • Low-Power Sensor Conditioning
  • Gas Detection
  • Temperature Measurement
  • Medical Instrumentation
  • Energy Harvesting Applications
  • Low Power Current Sensing