LCSC Electronics logoLCSC Electronics svg logo
Entrar
USD
Carrinho
MICROCHIP MCP4341-503E/ML product image
Imagens ilustrativas

MICROCHIP MCP4341-503E/ML

Fabricante
MICROCHIP
Cód. da peça
MCP4341-503E/ML
Nº LCSC
C637722
Emb.
QFN-20-EP(4x4)
Número do Cliente
Atrib. princ.
±20% SPI 50kΩ QFN-20-EP(4x4) Digital Potentiometers RoHS
Folha de DadosMICROCHIP MCP4341-503E/ML
Conformidade RoHS1 documentos disponíveis
Peças alternativas2
Garantia em cada pedido
100% Autêntico · Devolução ou Substituição em 30 Dias

Especificações do Produto

Tudo
TipoDescrição
CategoriaIntegrated Circuits (ICs)/Data Acquisition/Digital Potentiometers
FabricanteMICROCHIP
Emb.QFN-20-EP(4x4)
Voltage - Supply2.7V~5.5V
Resistance value changeLinear
Memory TypeEEPROM
Number of Taps129
Tolerance±20%
InterfaceSPI
Temperature Coefficient(Typ)50ppm/℃
FeaturesNon-volatile storage;Slide lock;Power-on reset
Operating Temperature-40℃~+125℃
Resistance Value (Ohms)50kΩ
Ajuda e FeedbackMostrar produtos similares (0) >

Recursos

Tradução por IA
  • Quad Resistor Network
  • Potentiometer or Rheostat configuration options
  • Resistor Network Resolution - 7-bit: 128 Resistors (129 Taps) - 8-bit: 256 Resistors (257 Taps)
  • R_AB Resistances options of: - 5 kΩ - 10 kΩ - 50 kΩ - 100 kΩ
  • Zero Scale to Full Scale Wiper operation
  • Low Wiper Resistance: 75 Ω (typical)
  • Low Tempco: - Absolute (Rheostat): 50 ppm typical (0°C to 70°C) - Ratiometric (Potentiometer): 15 ppm typical
  • Non-volatile Memory - Automatic Recall of Saved Wiper Setting - WiperLock™ Technology
  • SPI serial interface (10 MHz, modes 0,0 & 1,1) - High-Speed Read/Writes to wiper registers - Read/Write to Data EEPROM registers - Serially enabled EEPROM write protect
  • Resistor Network Terminal Disconnect Feature via Terminal Control (TCON) Register
  • Reset input pin
  • Write Protect Feature: - Hardware Write Protect (WP(overline)) Control pin - Software Write Protect (WP) Configuration bit
  • Brown-out reset protection (1.5V typical)
  • Serial Interface Inactive current (2.5 μA typical)
  • High-Voltage Tolerant Digital Inputs: Up to 12.5V
  • Supports Split Rail Applications
  • Internal weak pull-up on all digital inputs
  • Wide Operating Voltage: - 2.7V to 5.5V - Device Characteristics Specified - 1.8V to 5.5V - Device Operation
  • Wide Bandwidth (-3 dB) Operation: - 2 MHz (typical) for 5.0 kΩ device
  • Extended temperature range (-40°C to +125°C)