Zdjęcia poglądowe
Modele EDAEasyEDA
MAXIM MAX807NEWE+T
| Producent | |
| Nr części prod. | MAX807NEWE+T |
| Nr LCSC | C2070176 |
| Opak. | SOIC-16-7.4mm |
| Numer Klienta | |
| Klucz. cechy | 140ms 1 SOIC-16-7.4mm Supervisors RoHS |
| Karta Katalogowa | MAXIM MAX807NEWE+T |
| Zgodność z RoHS | 1 dokumentów dostępnych |
| Części alternatywne | 1 |
Specyfikacje Produktu
Wszystko
| Typ | Opis | |
|---|---|---|
| Kategoria | Integrated Circuits (ICs)/Power Management (PMIC)/Supervisors | |
| Producent | MAXIM | |
| Opak. | SOIC-16-7.4mm | |
| Reset Timeout | 140ms | |
| output type | - | |
| Operating Temperature | -40℃~+85℃@(TA) | |
| Reset Active Level | Active High;Active Low | |
| Threshold Voltage | 4.425V | |
| Number of Voltages Monitored | 1 |
| Typ | Opis | |
|---|---|---|
| Kategoria | Integrated Circuits (ICs)/Power Management (PMIC)/Supervisors | |
| Producent | MAXIM | |
| Opak. | SOIC-16-7.4mm | |
| Reset Timeout | 140ms | |
| output type | - |
| Typ | Opis | |
|---|---|---|
| Operating Temperature | -40℃~+85℃@(TA) | |
| Reset Active Level | Active High;Active Low | |
| Threshold Voltage | 4.425V | |
| Number of Voltages Monitored | 1 |
Pomoc i opiniePokaż podobne produkty (0) >
Opis
Tłumaczenie AI
The MAX807 microprocessor (µP) supervisory circuit reduces the complexity and number of components needed to monitor power-supply and battery-control functions in µP systems. A 70µA supply current makes the MAX807 ideal for use in portable equipment, while a 2ns chip-enable propagation delay and 250mA output current capability (20mA in battery-backup mode) make it suitable for larger, higher-performance equipment.
Funkcje
Tłumaczenie AI
- 70µA supply current
- 2ns chip-enable propagation delay
- 250mA output current capability (20mA in battery-backup mode)
- Comes in 16-pin DIP, SO, and TSSOP packages
- µP reset: The active-low RESET output is asserted during power-up, power-down, and brownout conditions, and is guaranteed to be in the correct state for VCC down to 1V
- Active-high RESET output
- Manual-reset input
- Two-stage power-fail warning: A separate low-line comparator compares VCC to a threshold 52mV above the reset threshold. This low-line comparator is more accurate than those in previous µP supervisors
- Backup-battery switchover for CMOS RAM, real-time clocks, µPs, or other low-power logic
- Write protection of CMOS RAM or EEPROM
- 2.275V threshold detector provides for power-fail warning and low-battery detection, or monitors a power supply other than +5V
- BATT OK status flag indicates that the backup-battery voltage is above +2.275V
- Watchdog-fault output—asserted if the watchdog input has not been toggled within a preset timeout period
- Precision 4.675V (MAX807L), 4.425V (MAX807M), or 4.575V (MAX807N) Voltage Monitoring
- 200ms Power-OK/Reset Time Delay
- RESET and RESET Outputs
- Independent Watchdog Timer
- 1µA Standby Current
- Power Switching 250mA in VCC Mode 20mA in Battery-Backup Mode
- On-Board Gating of Chip-Enable Signals; 2ns CE Gate Propagation Delay
- MaxCap and SuperCap Compatible
- Voltage Monitor for Power Fail
- Backup-Battery Monitor
- Guaranteed RESET Valid to VCC = 1V
- ±1.5% Low-Line Threshold Accuracy 52mV above Reset Threshold
Zastosowania
Tłumaczenie AI
- Computers
- Controllers
- Intelligent Instruments
- Critical µP Power Monitoring
- Portable/Battery-Powered Equipment
Gwarancja na każde zamówienie
100% Oryginalne · Zwrot lub Wymiana w ciągu 30 Dni
Brak w magazynie
Powiadom mnie
Minimum: 1Wielokrotność: 1Jednostka sprzedaży: Piece
Dodaj do Listy BOM
| Szt. | Cena jedn.(Tylko do wglądu) | Suma całkowita |
|---|---|---|
| 1+ | $ 12.336 | $ 12.34 |
| 200+ | $ 4.7742 | $ 954.84 |
| 500+ | $ 4.606 | $ 2303.00 |
| 1,000+ | $ 4.5242 | $ 4524.20 |
Standardowa Obudowa1000/Full Reel | ||
Lepsza cena za większą ilość?
$
Specyfikacje Produktu
Wszystko
| Typ | Opis | |
|---|---|---|
| Kategoria | Integrated Circuits (ICs)/Power Management (PMIC)/Supervisors | |
| Producent | MAXIM | |
| Opak. | SOIC-16-7.4mm | |
| Reset Timeout | 140ms | |
| output type | - | |
| Operating Temperature | -40℃~+85℃@(TA) | |
| Reset Active Level | Active High;Active Low | |
| Threshold Voltage | 4.425V | |
| Number of Voltages Monitored | 1 |
| Typ | Opis | |
|---|---|---|
| Kategoria | Integrated Circuits (ICs)/Power Management (PMIC)/Supervisors | |
| Producent | MAXIM | |
| Opak. | SOIC-16-7.4mm | |
| Reset Timeout | 140ms | |
| output type | - |
| Typ | Opis | |
|---|---|---|
| Operating Temperature | -40℃~+85℃@(TA) | |
| Reset Active Level | Active High;Active Low | |
| Threshold Voltage | 4.425V | |
| Number of Voltages Monitored | 1 |
Pomoc i opiniePokaż podobne produkty (0) >
Opis
Tłumaczenie AI
The MAX807 microprocessor (µP) supervisory circuit reduces the complexity and number of components needed to monitor power-supply and battery-control functions in µP systems. A 70µA supply current makes the MAX807 ideal for use in portable equipment, while a 2ns chip-enable propagation delay and 250mA output current capability (20mA in battery-backup mode) make it suitable for larger, higher-performance equipment.
Funkcje
Tłumaczenie AI
- 70µA supply current
- 2ns chip-enable propagation delay
- 250mA output current capability (20mA in battery-backup mode)
- Comes in 16-pin DIP, SO, and TSSOP packages
- µP reset: The active-low RESET output is asserted during power-up, power-down, and brownout conditions, and is guaranteed to be in the correct state for VCC down to 1V
- Active-high RESET output
- Manual-reset input
- Two-stage power-fail warning: A separate low-line comparator compares VCC to a threshold 52mV above the reset threshold. This low-line comparator is more accurate than those in previous µP supervisors
- Backup-battery switchover for CMOS RAM, real-time clocks, µPs, or other low-power logic
- Write protection of CMOS RAM or EEPROM
- 2.275V threshold detector provides for power-fail warning and low-battery detection, or monitors a power supply other than +5V
- BATT OK status flag indicates that the backup-battery voltage is above +2.275V
- Watchdog-fault output—asserted if the watchdog input has not been toggled within a preset timeout period
- Precision 4.675V (MAX807L), 4.425V (MAX807M), or 4.575V (MAX807N) Voltage Monitoring
- 200ms Power-OK/Reset Time Delay
- RESET and RESET Outputs
- Independent Watchdog Timer
- 1µA Standby Current
- Power Switching 250mA in VCC Mode 20mA in Battery-Backup Mode
- On-Board Gating of Chip-Enable Signals; 2ns CE Gate Propagation Delay
- MaxCap and SuperCap Compatible
- Voltage Monitor for Power Fail
- Backup-Battery Monitor
- Guaranteed RESET Valid to VCC = 1V
- ±1.5% Low-Line Threshold Accuracy 52mV above Reset Threshold
Zastosowania
Tłumaczenie AI
- Computers
- Controllers
- Intelligent Instruments
- Critical µP Power Monitoring
- Portable/Battery-Powered Equipment
C2070176 Biblioteka EasyEDA
Zgodność & Kody Eksportowe
| Typ | Szczegóły |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Typ | Szczegóły |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Typ | Szczegóły |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Części alternatywne
| MPN | Producent | Typ alternatywny | Opakowanie | Dostępność | Cena jednostkowa | ||
|---|---|---|---|---|---|---|---|
| MAX807NEWE+ | MAXIM | Alt. opakowanie | SOIC-16-300mil | 0 | $ 13.3881 |