- Pinout
- Footprint
Immagini a scopo illustrativo
Modelli EDAEasyEDA
MICROCHIP PIC32MM0032GPL028-I/M6
| Produttore | |
| Cod. Prod. | PIC32MM0032GPL028-I/M6 |
| Cod. LCSC | C150794 |
| Imballo | QFN-28-EP(4x4) |
| Numero Cliente | |
| Attr. chiave | Low-power, low-pin-count 32-bit flash microcontroller with MIPS32 microAptiv UC core |
| Scheda Tecnica | MICROCHIP PIC32MM0032GPL028-I/M6 |
| Conformità RoHS | 2 documenti disponibili |
| Parti alternative | 5 |
Specifiche del Prodotto
Tutto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Produttore | MICROCHIP | |
| Imballo | QFN-28-EP(4x4) | |
| DAC (Bit) | 5bit | |
| ADC (Bit) | 10bit;12bit | |
| Number of I/O | 22 | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage - Supply | 2V~3.6V | |
| Program Memory Type | FLASH | |
| EEPROM | - | |
| Program Storage Size | 32KB | |
| CPU Core | MIPS32 microAptiv | |
| Core Size | 32 Bit | |
| CPU Maximum Speed | 25MHz | |
| Oscillator Type | Built-in |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Produttore | MICROCHIP | |
| Imballo | QFN-28-EP(4x4) | |
| DAC (Bit) | 5bit | |
| ADC (Bit) | 10bit;12bit | |
| Number of I/O | 22 | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage - Supply | 2V~3.6V |
| Tipo | Descrizione | |
|---|---|---|
| Program Memory Type | FLASH | |
| EEPROM | - | |
| Program Storage Size | 32KB | |
| CPU Core | MIPS32 microAptiv | |
| Core Size | 32 Bit | |
| CPU Maximum Speed | 25MHz | |
| Oscillator Type | Built-in |
Aiuto & FeedbackMostra prodotti simili (0) >
Caratteristiche
Traduzione AI
- Operating conditions: 2.0V to 3.6V, -40°C to +85°C, DC to 25 MHz
- Low-power modes:
- Idle: CPU inactive, peripherals run on system clock
- Sleep: CPU and peripherals inactive
- Fast wake-up sleep with data retention
- Low-power sleep with data retention
- Sleep current: 0.5μA (regulator data retention mode), 5μA (regulator standby mode)
- On-chip 1.8V regulator (VREG)
- On-chip ultra-low-power data retention regulator
- microAptiv UC 32-bit core with 5-stage pipeline
- microMIPS instruction set — 35% code size reduction vs. MIPS32, with 98% of the performance
- DC to 25 MHz operating frequency
- 3.17 CoreMark/MHz (79 CoreMark) performance
- 1.53 DMIPS/MHz (37 DMIPS) performance (Dhrystone 2.1)
- 16/32-bit instruction width, 32-bit data bus
- Two sets of 32 core register files (32-bit) for reduced interrupt latency
- Single-cycle 32×16 multiply and dual-cycle 32×32 multiply
- Hardware divider unit
- 64-bit zero-wait-state flash with ECC for maximum endurance/data retention
- Low pin count packages from 20 to 36 pins, including UQFN as small as 4×4 mm
- Up to 64K flash memory:
- 20,000 erase/write cycle endurance
- Minimum 20-year data retention
- Self-programmable under software control
- Up to 8K data memory
- Pin-compatible with most PIC24 MCU/dsPIC DSC devices
- Multiple interrupt vectors with individually programmable priority levels
- Fail-Safe Clock Monitor mode
- Configurable Watchdog Timer with on-chip low-power RC oscillator
- Programmable code protection
- Flexible oscillator options, including:
- High-accuracy 8 MHz internal Fast RC (FRC) oscillator
- High-speed crystal/resonator oscillator or external clock
- 2×/3×/4×/6×/12×/24× PLL clocked from FRC or primary oscillator
- Atomic set, clear, and invert operations on selected peripheral registers
- High sink/source current: 11 mA/16 mA on all ports
- Dedicated low-power 32 kHz Timer Oscillator
- Two 4-wire SPI modules (up to 25 Mbps):
- 16-byte FIFO
- I2S mode
- Two UARTs:
- RS-232, RS-485, and LIN/J2602 support
- IrDA with on-chip hardware encoder and decoder
- External edge and level-change interrupts on all ports
- CRC module
- Hardware Real-Time Clock and Calendar (RTCC)
- Up to 20 remappable pins via Peripheral Pin Select (PPS)
- Total of 7 × 16-bit timers:
- Timer1: dedicated 16-bit timer/counter
- Two additional 16-bit timers in each MCCP and SCCP module
- Capture/Compare/PWM/Timer modules:
- Two 16-bit timers or one 32-bit timer per module
- PWM resolution as fine as 21 ns
- One multi-output (MCCP) module:
- Flexibly configurable as PWM, input capture, output compare, or timer
- 6 PWM outputs
- Programmable dead-band
- Auto-shutdown
- Two single-output (SCCP) modules:
- Flexibly configurable as PWM, input capture, output compare, or timer
- Single PWM mode
- Reference Clock Output (REFO)
- Two Configurable Logic Cells (CLC) with internal connections to selected peripherals and PPS
- Two programming and debugging interfaces:
- 2-wire ICSP interface for non-intrusive application access and real-time data exchange
- 4-wire MIPS standard Enhanced JTAG interface
- IEEE Standard 1149.2-compliant (JTAG) boundary scan
- Two analog comparators with input multiplexing
- Programmable High/Low-Voltage Detect (HLVD)
- 5-bit DAC with output pin
- Up to 14-channel, software-selectable 10/12-bit SAR ADC:
- 12-bit, 200K samples/second conversion rate (single sample-and-hold)
- 10-bit, 300K samples/second conversion rate (single sample-and-hold)
- Sleep mode operation
- Band gap reference voltage input
- Window threshold compare
- Auto-scan
- Brown-out Reset (BOR)
Garanzia su ogni ordine
100% Autentico · Reso o Sostituzione entro 30 Giorni
Disponibile: 1
1 Pronta consegna
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
| Qtà | Pr. unit. | Importo totale |
|---|---|---|
| 1+ | $ 2.2103 | $ 2.21 |
| 10+ | $ 2.1605 | $ 21.61 |
| 30+ | $ 2.1288 | $ 63.86 |
| 91+ | $ 2.0956 | $ 190.70 |
Package Standard91/Full Tube | ||
Prezzo migliore per quantità maggiore?
$
Specifiche del Prodotto
Tutto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Produttore | MICROCHIP | |
| Imballo | QFN-28-EP(4x4) | |
| DAC (Bit) | 5bit | |
| ADC (Bit) | 10bit;12bit | |
| Number of I/O | 22 | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage - Supply | 2V~3.6V | |
| Program Memory Type | FLASH | |
| EEPROM | - | |
| Program Storage Size | 32KB | |
| CPU Core | MIPS32 microAptiv | |
| Core Size | 32 Bit | |
| CPU Maximum Speed | 25MHz | |
| Oscillator Type | Built-in |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Produttore | MICROCHIP | |
| Imballo | QFN-28-EP(4x4) | |
| DAC (Bit) | 5bit | |
| ADC (Bit) | 10bit;12bit | |
| Number of I/O | 22 | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage - Supply | 2V~3.6V |
| Tipo | Descrizione | |
|---|---|---|
| Program Memory Type | FLASH | |
| EEPROM | - | |
| Program Storage Size | 32KB | |
| CPU Core | MIPS32 microAptiv | |
| Core Size | 32 Bit | |
| CPU Maximum Speed | 25MHz | |
| Oscillator Type | Built-in |
Aiuto & FeedbackMostra prodotti simili (0) >
Caratteristiche
Traduzione AI
- Operating conditions: 2.0V to 3.6V, -40°C to +85°C, DC to 25 MHz
- Low-power modes:
- Idle: CPU inactive, peripherals run on system clock
- Sleep: CPU and peripherals inactive
- Fast wake-up sleep with data retention
- Low-power sleep with data retention
- Sleep current: 0.5μA (regulator data retention mode), 5μA (regulator standby mode)
- On-chip 1.8V regulator (VREG)
- On-chip ultra-low-power data retention regulator
- microAptiv UC 32-bit core with 5-stage pipeline
- microMIPS instruction set — 35% code size reduction vs. MIPS32, with 98% of the performance
- DC to 25 MHz operating frequency
- 3.17 CoreMark/MHz (79 CoreMark) performance
- 1.53 DMIPS/MHz (37 DMIPS) performance (Dhrystone 2.1)
- 16/32-bit instruction width, 32-bit data bus
- Two sets of 32 core register files (32-bit) for reduced interrupt latency
- Single-cycle 32×16 multiply and dual-cycle 32×32 multiply
- Hardware divider unit
- 64-bit zero-wait-state flash with ECC for maximum endurance/data retention
- Low pin count packages from 20 to 36 pins, including UQFN as small as 4×4 mm
- Up to 64K flash memory:
- 20,000 erase/write cycle endurance
- Minimum 20-year data retention
- Self-programmable under software control
- Up to 8K data memory
- Pin-compatible with most PIC24 MCU/dsPIC DSC devices
- Multiple interrupt vectors with individually programmable priority levels
- Fail-Safe Clock Monitor mode
- Configurable Watchdog Timer with on-chip low-power RC oscillator
- Programmable code protection
- Flexible oscillator options, including:
- High-accuracy 8 MHz internal Fast RC (FRC) oscillator
- High-speed crystal/resonator oscillator or external clock
- 2×/3×/4×/6×/12×/24× PLL clocked from FRC or primary oscillator
- Atomic set, clear, and invert operations on selected peripheral registers
- High sink/source current: 11 mA/16 mA on all ports
- Dedicated low-power 32 kHz Timer Oscillator
- Two 4-wire SPI modules (up to 25 Mbps):
- 16-byte FIFO
- I2S mode
- Two UARTs:
- RS-232, RS-485, and LIN/J2602 support
- IrDA with on-chip hardware encoder and decoder
- External edge and level-change interrupts on all ports
- CRC module
- Hardware Real-Time Clock and Calendar (RTCC)
- Up to 20 remappable pins via Peripheral Pin Select (PPS)
- Total of 7 × 16-bit timers:
- Timer1: dedicated 16-bit timer/counter
- Two additional 16-bit timers in each MCCP and SCCP module
- Capture/Compare/PWM/Timer modules:
- Two 16-bit timers or one 32-bit timer per module
- PWM resolution as fine as 21 ns
- One multi-output (MCCP) module:
- Flexibly configurable as PWM, input capture, output compare, or timer
- 6 PWM outputs
- Programmable dead-band
- Auto-shutdown
- Two single-output (SCCP) modules:
- Flexibly configurable as PWM, input capture, output compare, or timer
- Single PWM mode
- Reference Clock Output (REFO)
- Two Configurable Logic Cells (CLC) with internal connections to selected peripherals and PPS
- Two programming and debugging interfaces:
- 2-wire ICSP interface for non-intrusive application access and real-time data exchange
- 4-wire MIPS standard Enhanced JTAG interface
- IEEE Standard 1149.2-compliant (JTAG) boundary scan
- Two analog comparators with input multiplexing
- Programmable High/Low-Voltage Detect (HLVD)
- 5-bit DAC with output pin
- Up to 14-channel, software-selectable 10/12-bit SAR ADC:
- 12-bit, 200K samples/second conversion rate (single sample-and-hold)
- 10-bit, 300K samples/second conversion rate (single sample-and-hold)
- Sleep mode operation
- Band gap reference voltage input
- Window threshold compare
- Auto-scan
- Brown-out Reset (BOR)
C150794 Libreria EasyEDA
Conformità & Codici di Esportazione
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Tipo | Dettagli |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC |
| Tipo | Dettagli |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |
Parti alternative
| MPN | Produttore | Tipo alternativo | Imballaggio | Disponibilità | Prezzo unitario | ||
|---|---|---|---|---|---|---|---|
| PIC32MM0032GPL028T-I/M6 | MICROCHIP | Simili | UQFN-28-EP(4x4) | 0 | $ 1.65 | ||
| PIC32MM0064GPL028-I/M6 | MICROCHIP | Simili | QFN-28-EP(4x4) | 0 | $ 2.5833 | ||
| PIC32MM0064GPL028T-I/M6 | MICROCHIP | Simili | UQFN-28-EP(4x4) | 0 | $ 1.8183 | ||
| PIC32MM0032GPL028-E/M6 | MICROCHIP | Simili | UQFN-28-EP(4x4) | 0 | $ 1.7858 | ||
| PIC32MM0064GPL028-E/M6 | MICROCHIP | Simili | UQFN-28-EP(4x4) | 0 | $ 1.9719 |