LCSC Electronics logoLCSC Electronics svg logo
Zaloguj
USD
TI LM2675N-3.3/NOPB product image
Zdjęcia poglądowe

TI LM2675N-3.3/NOPB

Producent
Nr części prod.
LM2675N-3.3/NOPB
Nr LCSC
C1355784
Opak.
PDIP-8
Numer Klienta
Klucz. cechy
260kHz Step-down type Fixed 3.3V 1A PDIP-8 Voltage Regulators - DC DC Switching Regulators RoHS
Karta KatalogowaTI LM2675N-3.3/NOPB
Zgodność z RoHS1 dokumentów dostępnych
Części alternatywne1
Gwarancja na każde zamówienie
100% Oryginalne · Zwrot lub Wymiana w ciągu 30 Dni
Brak w magazynie
Powiadom mnie
Minimum: 1Wielokrotność: 1Jednostka sprzedaży: Piece
Dodaj do Listy BOM
Szt.Cena jedn.(Tylko do wglądu)Suma całkowita
1+$ 2.8596$ 2.86
200+$ 1.1074$ 221.48
500+$ 1.0676$ 533.80
1,000+$ 1.0492$ 1049.20
Standardowa Obudowa40/Full Tube
Lepsza cena za większą ilość?
$

Specyfikacje Produktu

Wszystko
TypOpis
KategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
ProducentTI
Opak.PDIP-8
Operating Temperature-40℃~+125℃@(TJ)
Frequency - Switching260kHz
FunctionStep-down type
Number of Outputs1
FeaturesCycle-by-cycle current limiting;Overcurrent Protection
TopologyBuck
Output TypeFixed
Operating Voltage6.5V~40V
Switch tube (built-in/external)Built-in
Output Voltage3.3V
Output Current1A
Quiescent Current2.5mA

Opis

Tłumaczenie AI

The LM2675 series of regulators are monolithic integrated DC-DC converter circuits built with a LMDMOS process. These regulators provide all the active functions for a step-down (buck) switching regulator, capable of driving a 1-A load current with excellent line and load regulation. These devices are available in fixed output voltages of 3.3 V, 5 V, 12 V, and an adjustable output version. Requiring a minimum number of external components, these regulators are simple to use and include patented internal frequency compensation and a fixed frequency oscillator. The LM2675 series operates at a switching frequency of 260 kHz, thus allowing smaller-sized filter components than what would be needed with lower frequency switching regulators. Because of its very high efficiency (>90%), the copper traces on the printed-circuit board are the only heat sinking needed. A family of standard inductors for use with the LM2675 are available from several different manufacturers. This feature greatly simplifies the design of switch-mode power supplies using these advanced ICs. Also included in the data sheet are selector guides for diodes and capacitors designed to work in switch-mode power supplies. Other features include ±1.5%-tolerance on output voltage within specified input voltages and output load conditions, and ±10% on the oscillator frequency. External shutdown is included, featuring typically 50-μA standby current. The output switch includes current limiting, as well as thermal shutdown for full protection under fault conditions.

Funkcje

Tłumaczenie AI
  • Efficiency up to 96%
  • Available in 8-Pin SOIC, PDIP, and 16-Pin WSON Package
  • Requires only 5 External Components
  • 3.3-V, 5-V, 12-V, and Adjustable Output Versions
  • Adjustable Version Output Voltage Range: 1.21 V to 37 V
  • ±1.5% Maximum Output Voltage Tolerance Over Line and Load Conditions
  • Ensured 1-A Output Load Current
  • Wide Input Voltage Range: 8 V to 40 V
  • 260-kHz Fixed Frequency Internal Oscillator
  • TTL Shutdown Capability, Low-Power Standby Mode
  • Thermal Shutdown and Current Limit Protection

Zastosowania

Tłumaczenie AI
  • Simple High Efficiency (>90%) Step-Down (Buck) Regulator
  • Efficient Preregulator for Linear Regulators
  • Positive-to-Negative Converter

Części alternatywne

MPNProducentTyp alternatywnyOpakowanieDostępnośćCena jednostkowa
LM2672N-3.3/NOPBTIPodobnePDIP-80$ 2.3694